From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: davem@davemloft.net, robh+dt@kernel.org, mark.rutland@arm.com,
f.fainelli@gmail.com, hkallweit1@gmail.com, andrew@lunn.ch,
Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: [PATCH v2 15/15] dt-bindings: net: add bindings for ADIN PHY driver
Date: Thu, 8 Aug 2019 15:30:26 +0300 [thread overview]
Message-ID: <20190808123026.17382-16-alexandru.ardelean@analog.com> (raw)
In-Reply-To: <20190808123026.17382-1-alexandru.ardelean@analog.com>
This change adds bindings for the Analog Devices ADIN PHY driver, detailing
all the properties implemented by the driver.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
.../devicetree/bindings/net/adi,adin.yaml | 76 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/adi,adin.yaml
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
new file mode 100644
index 000000000000..86177c8fe23a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIN1200/ADIN1300 PHY
+
+maintainers:
+ - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+ Bindings for Analog Devices Industrial Ethernet PHYs
+
+allOf:
+ - $ref: ethernet-phy.yaml#
+
+properties:
+ adi,rx-internal-delay-ps:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ RGMII RX Clock Delay used only when PHY operates in RGMII mode with
+ internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
+ enum: [ 1600, 1800, 2000, 2200, 2400 ]
+ default: 2000
+
+ adi,tx-internal-delay-ps:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ RGMII TX Clock Delay used only when PHY operates in RGMII mode with
+ internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
+ enum: [ 1600, 1800, 2000, 2200, 2400 ]
+ default: 2000
+
+ adi,fifo-depth-bits:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ When operating in RMII mode, this option configures the FIFO depth.
+ enum: [ 4, 8, 12, 16, 20, 24 ]
+ default: 8
+
+ adi,disable-energy-detect:
+ description: |
+ Disables Energy Detect Powerdown Mode (default disabled, i.e energy detect
+ is enabled if this property is unspecified)
+ type: boolean
+
+examples:
+ - |
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy-mode = "rgmii-id";
+
+ ethernet-phy@0 {
+ reg = <0>;
+
+ adi,rx-internal-delay-ps = <1800>;
+ adi,tx-internal-delay-ps = <2200>;
+ };
+ };
+ - |
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy-mode = "rmii";
+
+ ethernet-phy@1 {
+ reg = <1>;
+
+ adi,fifo-depth-bits = <16>;
+ adi,disable-energy-detect;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index e8aa8a667864..fd9ab61c2670 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -944,6 +944,7 @@ L: netdev@vger.kernel.org
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/net/phy/adin.c
+F: Documentation/devicetree/bindings/net/adi,adin.yaml
ANALOG DEVICES INC ADIS DRIVER LIBRARY
M: Alexandru Ardelean <alexandru.ardelean@analog.com>
--
2.20.1
next prev parent reply other threads:[~2019-08-08 12:30 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-08 12:30 [PATCH v2 00/15] net: phy: adin: add support for Analog Devices PHYs Alexandru Ardelean
2019-08-08 12:30 ` [PATCH v2 01/15] " Alexandru Ardelean
2019-08-08 15:13 ` Andrew Lunn
2019-08-08 12:30 ` [PATCH v2 02/15] net: phy: adin: hook genphy_read_abilities() to get_features Alexandru Ardelean
2019-08-08 15:24 ` Andrew Lunn
2019-08-08 19:32 ` Heiner Kallweit
2019-08-09 12:00 ` Ardelean, Alexandru
2019-08-08 12:30 ` [PATCH v2 03/15] net: phy: adin: hook genphy_{suspend,resume} into the driver Alexandru Ardelean
2019-08-08 15:24 ` Andrew Lunn
2019-08-08 12:30 ` [PATCH v2 04/15] net: phy: adin: add support for interrupts Alexandru Ardelean
2019-08-08 15:25 ` Andrew Lunn
2019-08-08 12:30 ` [PATCH v2 05/15] net: phy: adin: add {write,read}_mmd hooks Alexandru Ardelean
2019-08-08 15:35 ` Andrew Lunn
2019-08-09 12:05 ` Ardelean, Alexandru
2019-08-08 12:30 ` [PATCH v2 06/15] net: phy: adin: configure RGMII/RMII/MII modes on config Alexandru Ardelean
2019-08-08 15:38 ` Andrew Lunn
2019-08-08 12:30 ` [PATCH v2 07/15] net: phy: adin: make RGMII internal delays configurable Alexandru Ardelean
2019-08-08 15:40 ` Andrew Lunn
2019-08-08 12:30 ` [PATCH v2 08/15] net: phy: adin: make RMII fifo depth configurable Alexandru Ardelean
2019-08-08 15:42 ` Andrew Lunn
2019-08-08 12:30 ` [PATCH v2 09/15] net: phy: adin: add support MDI/MDIX/Auto-MDI selection Alexandru Ardelean
2019-08-08 12:30 ` [PATCH v2 10/15] net: phy: adin: add EEE translation layer from Clause 45 to Clause 22 Alexandru Ardelean
2019-08-08 12:30 ` [PATCH v2 11/15] net: phy: adin: implement PHY subsystem software reset Alexandru Ardelean
2019-08-08 12:30 ` [PATCH v2 12/15] net: phy: adin: implement Energy Detect Powerdown mode Alexandru Ardelean
2019-08-08 12:30 ` [PATCH v2 13/15] net: phy: adin: configure downshift on config_init Alexandru Ardelean
2019-08-08 19:38 ` Heiner Kallweit
2019-08-08 20:39 ` Andrew Lunn
2019-08-09 12:06 ` Ardelean, Alexandru
2019-08-08 12:30 ` [PATCH v2 14/15] net: phy: adin: add ethtool get_stats support Alexandru Ardelean
2019-08-08 12:30 ` Alexandru Ardelean [this message]
2019-08-08 23:03 ` [PATCH v2 15/15] dt-bindings: net: add bindings for ADIN PHY driver Rob Herring
2019-08-09 12:06 ` Ardelean, Alexandru
2019-08-08 18:24 ` [PATCH v2 00/15] net: phy: adin: add support for Analog Devices PHYs David Miller
2019-08-09 12:32 ` Ardelean, Alexandru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190808123026.17382-16-alexandru.ardelean@analog.com \
--to=alexandru.ardelean@analog.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).