From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Andersson Subject: Re: [PATCH 1/2] regulator: dt-bindings: Add PM8150x compatibles Date: Thu, 8 Aug 2019 20:29:15 -0700 Message-ID: <20190809032915.GK26807@tuxbook-pro> References: <20190808093343.5600-1-vkoul@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190808093343.5600-1-vkoul@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: Vinod Koul Cc: Mark Brown , linux-arm-msm@vger.kernel.org, Andy Gross , Liam Girdwood , Rob Herring , Mark Rutland , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On Thu 08 Aug 02:33 PDT 2019, Vinod Koul wrote: > Add PM8150, PM8150L and PM8009 compatibles for these PMICs found > in some Qualcomm platforms. > > Signed-off-by: Vinod Koul > --- > .../devicetree/bindings/regulator/qcom,rpmh-regulator.txt | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt > index 14d2eee96b3d..1a9cab50503a 100644 > --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt > +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt > @@ -25,6 +25,9 @@ Supported regulator node names: > PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 > PMI8998: bob > PM8005: smps1 - smps4 > + PM8150: smps1 - smps10, ldo1 - ldo18 > + PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb > + PM8009: smps1 - smps2, ld01 - ldo7 Please maintain the sort order. Apart from that Reviewed-by: Bjorn Andersson Regards, Bjorn > > ======================== > First Level Nodes - PMIC > @@ -35,7 +38,10 @@ First Level Nodes - PMIC > Value type: > Definition: Must be one of: "qcom,pm8998-rpmh-regulators", > "qcom,pmi8998-rpmh-regulators" or > - "qcom,pm8005-rpmh-regulators". > + "qcom,pm8005-rpmh-regulators" or > + "qcom,pm8150-rpmh-regulators" or > + "qcom,pm8150l-rpmh-regulators" or > + "qcom,pm8009-rpmh-regulators". > > - qcom,pmic-id > Usage: required > -- > 2.20.1 >