From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg Kroah-Hartman Subject: Re: [PATCH v9 0/7] Solve postboot supplier cleanup and optimize probe ordering Date: Fri, 16 Aug 2019 11:10:56 +0200 Message-ID: <20190816091056.GA15703@kroah.com> References: <20190731221721.187713-1-saravanak@google.com> <919b66e9-9708-de34-41cd-e448838b130c@gmail.com> <7a0ee940-f81f-36b9-93e7-2b4c242360c9@gmail.com> <183eab70-0eda-f30e-ae25-74355b8b84c9@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <183eab70-0eda-f30e-ae25-74355b8b84c9@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Frank Rowand Cc: Saravana Kannan , Rob Herring , Mark Rutland , "Rafael J. Wysocki" , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , LKML , David Collins , Android Kernel Team List-Id: devicetree@vger.kernel.org On Thu, Aug 15, 2019 at 08:09:19PM -0700, Frank Rowand wrote: > Hi Saravana, > > On 8/15/19 6:50 PM, Saravana Kannan wrote: > > On Fri, Aug 9, 2019 at 10:20 PM Frank Rowand wrote: > >> > >> On 8/9/19 10:00 PM, Saravana Kannan wrote: > >>> On Fri, Aug 9, 2019 at 7:57 PM Frank Rowand wrote: > >>>> > >>>> Hi Saravana, > >>>> > >>>> On 7/31/19 3:17 PM, Saravana Kannan wrote: > >>>>> Add device-links to track functional dependencies between devices > >>>>> after they are created (but before they are probed) by looking at > >>>>> their common DT bindings like clocks, interconnects, etc. > >>>>> > >>>>> Having functional dependencies automatically added before the devices > >>>>> are probed, provides the following benefits: > >>>>> > >>>>> - Optimizes device probe order and avoids the useless work of > >>>>> attempting probes of devices that will not probe successfully > >>>>> (because their suppliers aren't present or haven't probed yet). > >>>>> > >>>>> For example, in a commonly available mobile SoC, registering just > >>>>> one consumer device's driver at an initcall level earlier than the > >>>>> supplier device's driver causes 11 failed probe attempts before the > >>>>> consumer device probes successfully. This was with a kernel with all > >>>>> the drivers statically compiled in. This problem gets a lot worse if > >>>>> all the drivers are loaded as modules without direct symbol > >>>>> dependencies. > >>>>> > >>>>> - Supplier devices like clock providers, interconnect providers, etc > >>>>> need to keep the resources they provide active and at a particular > >>>>> state(s) during boot up even if their current set of consumers don't > >>>>> request the resource to be active. This is because the rest of the > >>>>> consumers might not have probed yet and turning off the resource > >>>>> before all the consumers have probed could lead to a hang or > >>>>> undesired user experience. > >>>>> > >>>>> Some frameworks (Eg: regulator) handle this today by turning off > >>>>> "unused" resources at late_initcall_sync and hoping all the devices > >>>>> have probed by then. This is not a valid assumption for systems with > >>>>> loadable modules. Other frameworks (Eg: clock) just don't handle > >>>>> this due to the lack of a clear signal for when they can turn off > >>>>> resources. This leads to downstream hacks to handle cases like this > >>>>> that can easily be solved in the upstream kernel. > >>>>> > >>>>> By linking devices before they are probed, we give suppliers a clear > >>>>> count of the number of dependent consumers. Once all of the > >>>>> consumers are active, the suppliers can turn off the unused > >>>>> resources without making assumptions about the number of consumers. > >>>>> > >>>>> By default we just add device-links to track "driver presence" (probe > >>>>> succeeded) of the supplier device. If any other functionality provided > >>>>> by device-links are needed, it is left to the consumer/supplier > >>>>> devices to change the link when they probe. > >>>>> > >>>>> v1 -> v2: > >>>>> - Drop patch to speed up of_find_device_by_node() > >>>>> - Drop depends-on property and use existing bindings > >>>>> > >>>>> v2 -> v3: > >>>>> - Refactor the code to have driver core initiate the linking of devs > >>>>> - Have driver core link consumers to supplier before it's probed > >>>>> - Add support for drivers to edit the device links before probing > >>>>> > >>>>> v3 -> v4: > >>>>> - Tested edit_links() on system with cyclic dependency. Works. > >>>>> - Added some checks to make sure device link isn't attempted from > >>>>> parent device node to child device node. > >>>>> - Added way to pause/resume sync_state callbacks across > >>>>> of_platform_populate(). > >>>>> - Recursively parse DT node to create device links from parent to > >>>>> suppliers of parent and all child nodes. > >>>>> > >>>>> v4 -> v5: > >>>>> - Fixed copy-pasta bugs with linked list handling > >>>>> - Walk up the phandle reference till I find an actual device (needed > >>>>> for regulators to work) > >>>>> - Added support for linking devices from regulator DT bindings > >>>>> - Tested the whole series again to make sure cyclic dependencies are > >>>>> broken with edit_links() and regulator links are created properly. > >>>>> > >>>>> v5 -> v6: > >>>>> - Split, squashed and reordered some of the patches. > >>>>> - Refactored the device linking code to follow the same code pattern for > >>>>> any property. > >>>>> > >>>>> v6 -> v7: > >>>>> - No functional changes. > >>>>> - Renamed i to index > >>>>> - Added comment to clarify not having to check property name for every > >>>>> index > >>>>> - Added "matched" variable to clarify code. No functional change. > >>>>> - Added comments to include/linux/device.h for add_links() > >>>>> > >>>>> v7 -> v8: > >>>>> - Rebased on top of linux-next to handle device link changes in [1] > >>>>> > >>>> > >>>> > >>>>> v8 -> v9: > >>>>> - Fixed kbuild test bot reported errors (docs and const) > >>>> > >>>> Some maintainers have strong opinions about whether change logs should be: > >>>> > >>>> (1) only in patch 0 > >>>> (2) only in the specific patches that are changed > >>>> (3) both in patch 0 and in the specific patches that are changed. > >>>> > >>>> I can adapt to any of the three styles. But for style "(1)" please > >>>> list which specific patch has changed for each item in the change list. > >>>> > >>> > >>> Thanks for the context Frank. I'm okay with (1) or (2) but I'll stick > >>> with (1) for this series. Didn't realize there were options (2) and > >>> (3). Since you started reviewing from v7, I'll do that in the future > >>> updates? Also, I haven't forgotten your emails. Just tied up with > >>> something else for a few days. I'll get to your emails next week. > >> > >> Yes, starting with future updates is fine, no need to redo the v9 > >> change logs. > >> > >> No problem on the timing. I figured you were busy or away from the > >> internet. > > > > I'm replying to your comments on the other 3 patches. Okay with a > > majority of them. I'll wait for your reply to see where we settle for > > some of the points before I send out any patches though. > > > > For now I'm thinking of sending them as separate clean up patches so > > that Greg doesn't have to deal with reverts in his "next" branch. We > > can squash them later if we really need to rip out what's in there and > > push it again. > > > > -Saravana > > > > Please do not do separate clean up patches. The series that Greg has is > not ready for acceptance and I am going to ask him to revert it as we > work through the needed changes. > > I suspect there will be at least two more versions of the series. The > first is to get the patches I commented in good shape. Then I will > look at the patches later in the series to see how they fit into the > big picture. > > In the end, there should be one coherent patch series that implements > the feature. Incremental patches to fix up the comments and documentation is fine, no need to respin the whole mess. thanks, greg k-h