devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Simon Horman <horms@verge.net.au>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Biju Das <biju.das@bp.renesas.com>,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	Jacopo Mondi <jacopo+renesas@jmondi.org>,
	sam@ravnborg.org, xu_shunji@hoperun.com,
	ebiharaml@si-linux.co.jp
Subject: Re: [PATCH v3 6/8] arm64: dts: renesas: Add EK874 board with idk-2121wr display support
Date: Thu, 7 Nov 2019 21:55:02 +0200	[thread overview]
Message-ID: <20191107195502.GK24983@pendragon.ideasonboard.com> (raw)
In-Reply-To: <1567017402-5895-7-git-send-email-fabrizio.castro@bp.renesas.com>

Hi Fabrizio,

Thank you for the patch.

On Wed, Aug 28, 2019 at 07:36:40PM +0100, Fabrizio Castro wrote:
> The EK874 is advertised as compatible with panel IDK-2121WR from
> Advantech, however the panel isn't sold alongside the board.
> A new dts, adding everything that's required to get the panel to
> to work with the EK874, is the most convenient way to support the
> EK874 when it's connected to the IDK-2121WR.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> 
> ---
> v1->v2:
> * Added comment for lvds-connector-en-gpio
> * Renamed &lvds0_panel_in to panel_in0
> * Renamed &lvds1_panel_in to panel_in1
> 
> v2->v3:
> * removed renesas,swap-data property
> * added dual-lvds-odd-pixels and dual-lvds-even-pixels properties
> 
> Geert,
> 
> no need to review this patch unless they like the idea behind this
> series.

I like the idea :-) We still have a few issues to solve, but it should
make it in.

The patch looks sane to me, but I haven't checked if it matches the
hardware, so

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

(even if this really calls for DT overlays)

> ---
>  arch/arm64/boot/dts/renesas/Makefile               |   3 +-
>  .../boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts | 116 +++++++++++++++++++++
>  2 files changed, 118 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
> 
> diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
> index 42b74c2..ce48478 100644
> --- a/arch/arm64/boot/dts/renesas/Makefile
> +++ b/arch/arm64/boot/dts/renesas/Makefile
> @@ -1,7 +1,8 @@
>  # SPDX-License-Identifier: GPL-2.0
>  dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
>  dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
> -dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
> +dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \
> +			       r8a774c0-ek874-idk-2121wr.dtb
>  dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
>  dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
>  dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
> diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
> new file mode 100644
> index 0000000..a7b27d0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
> @@ -0,0 +1,116 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874),
> + * connected to an Advantech IDK-2121WR 21.5" LVDS panel
> + *
> + * Copyright (C) 2019 Renesas Electronics Corp.
> + */
> +
> +#include "r8a774c0-ek874.dts"
> +
> +/ {
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm5 0 50000>;
> +
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +
> +		power-supply = <&reg_12p0v>;
> +		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	panel-lvds {
> +		compatible = "advantech,idk-2121wr", "panel-lvds";
> +
> +		width-mm = <476>;
> +		height-mm = <268>;
> +
> +		data-mapping = "vesa-24";
> +
> +		panel-timing {
> +			clock-frequency = <148500000>;
> +			hactive = <1920>;
> +			vactive = <1080>;
> +			hsync-len = <44>;
> +			hfront-porch = <88>;
> +			hback-porch = <148>;
> +			vfront-porch = <4>;
> +			vback-porch = <36>;
> +			vsync-len = <5>;
> +		};
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				dual-lvds-odd-pixels;
> +				panel_in0: endpoint {
> +					remote-endpoint = <&lvds0_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				dual-lvds-even-pixels;
> +				panel_in1: endpoint {
> +					remote-endpoint = <&lvds1_out>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&gpio0 {
> +	/*
> +	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
> +	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
> +	 */
> +	lvds-connector-en-gpio{
> +		gpio-hog;
> +		gpios = <17 GPIO_ACTIVE_HIGH>;
> +		output-low;
> +		line-name = "lvds-connector-en-gpio";
> +	};
> +};
> +
> +&lvds0 {
> +	ports {
> +		port@1 {
> +			lvds0_out: endpoint {
> +				remote-endpoint = <&panel_in0>;
> +			};
> +		};
> +	};
> +};
> +
> +&lvds1 {
> +	status = "okay";
> +
> +	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
> +	clock-names = "fck", "dclkin.0", "extal";
> +
> +	ports {
> +		port@1 {
> +			lvds1_out: endpoint {
> +				remote-endpoint = <&panel_in1>;
> +			};
> +		};
> +	};
> +};
> +
> +&pfc {
> +	pwm5_pins: pwm5 {
> +		groups = "pwm5_a";
> +		function = "pwm5";
> +	};
> +};
> +
> +&pwm5 {
> +	pinctrl-0 = <&pwm5_pins>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +};

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2019-11-07 19:55 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-28 18:36 [PATCH v3 0/8] Add dual-LVDS panel support to EK874 Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 1/8] dt-bindings: display: Add bindings for LVDS bus-timings Fabrizio Castro
2019-08-29  7:57   ` Geert Uytterhoeven
2019-08-29  9:14     ` Fabrizio Castro
2019-08-29 14:03   ` Rob Herring
2019-08-29 14:38     ` Fabrizio Castro
2019-11-07 18:00       ` Laurent Pinchart
2019-12-06 15:11         ` Fabrizio Castro
2019-12-06 15:10     ` Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 2/8] dt-bindings: display: Add idk-2121wr binding Fabrizio Castro
2019-11-07 18:12   ` Laurent Pinchart
2019-12-06 15:17     ` Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 6/8] arm64: dts: renesas: Add EK874 board with idk-2121wr display support Fabrizio Castro
2019-11-07 19:55   ` Laurent Pinchart [this message]
2019-08-28 18:36 ` [PATCH v3 7/8] [HACK] arm64: dts: renesas: draak: Enable LVDS Fabrizio Castro
2019-11-07 19:57   ` Laurent Pinchart
2019-12-06 15:40     ` Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 8/8] [HACK] arm64: dts: renesas: draak: Enable LVDS dual-link operation Fabrizio Castro
2019-08-29 15:26 ` [PATCH v3 0/8] Add dual-LVDS panel support to EK874 Rob Herring
2019-09-02 10:01   ` Fabrizio Castro
2019-10-22 16:30 ` Fabrizio Castro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191107195502.GK24983@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=biju.das@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ebiharaml@si-linux.co.jp \
    --cc=fabrizio.castro@bp.renesas.com \
    --cc=geert+renesas@glider.be \
    --cc=horms@verge.net.au \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=xu_shunji@hoperun.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).