Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Harish Jenny K N <harish_kandiga@mentor.com>,
	Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: Alexander Graf <graf@amazon.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Phil Reid <preid@electromag.com.au>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Christoffer Dall <christoffer.dall@arm.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org, qemu-devel@nongnu.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3 6/7] docs: gpio: Add GPIO Aggregator/Repeater documentation
Date: Wed, 27 Nov 2019 09:42:52 +0100
Message-ID: <20191127084253.16356-7-geert+renesas@glider.be> (raw)
In-Reply-To: <20191127084253.16356-1-geert+renesas@glider.be>

Document the GPIO Aggregator/Repeater, and the three typical use-cases.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v3:
  - New.
---
 .../admin-guide/gpio/gpio-aggregator.rst      | 111 ++++++++++++++++++
 Documentation/admin-guide/gpio/index.rst      |   1 +
 2 files changed, 112 insertions(+)
 create mode 100644 Documentation/admin-guide/gpio/gpio-aggregator.rst

diff --git a/Documentation/admin-guide/gpio/gpio-aggregator.rst b/Documentation/admin-guide/gpio/gpio-aggregator.rst
new file mode 100644
index 0000000000000000..826146e260253299
--- /dev/null
+++ b/Documentation/admin-guide/gpio/gpio-aggregator.rst
@@ -0,0 +1,111 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+GPIO Aggregator/Repeater
+========================
+
+The GPIO Aggregator/Repeater allows to aggregate GPIOs, and expose them as a
+new gpio_chip.  This supports the following use cases.
+
+
+Aggregating GPIOs using Sysfs
+-----------------------------
+
+GPIO controllers are exported to userspace using /dev/gpiochip* character
+devices.  Access control to these devices is provided by standard UNIX file
+system permissions, on an all-or-nothing basis: either a GPIO controller is
+accessible for a user, or it is not.
+
+The GPIO Aggregator allows access control for individual GPIOs, by aggregating
+them into a new gpio_chip, which can be assigned to a group or user using
+standard UNIX file ownership and permissions.  Furthermore, this simplifies and
+hardens exporting GPIOs to a virtual machine, as the VM can just grab the full
+GPIO controller, and no longer needs to care about which GPIOs to grab and
+which not, reducing the attack surface.
+
+Aggregated GPIO controllers are instantiated and destroyed by writing to
+write-only attribute files in sysfs.
+
+    /sys/bus/platform/drivers/gpio-aggregator/
+
+	"new_device" ...
+		Userspace may ask the kernel to instantiate an aggregated GPIO
+		controller by writing a string describing the GPIOs to
+		aggregate to the "new_device" file, using the format
+
+		.. code-block:: none
+
+		    [<gpioA>] [<gpiochipB> <offsets>] ...
+
+		Where:
+
+		    "<gpioA>" ...
+			    is a GPIO line name,
+
+		    "<gpiochipB>" ...
+			    is a GPIO chip label or name, and
+
+		    "<offsets>" ...
+			    is a comma-separated list of GPIO offsets and/or
+			    GPIO offset ranges denoted by dashes.
+
+		Example: Instantiate a new GPIO aggregator by aggregating GPIO
+		19 of "e6052000.gpio" and GPIOs 20-21 of "gpiochip2" into a new
+		gpio_chip:
+
+		.. code-block:: bash
+
+		    echo 'e6052000.gpio 19 gpiochip2 20-21' > new_device
+
+	"delete_device" ...
+		Userspace may ask the kernel to destroy an aggregated GPIO
+		controller after use by writing its device name to the
+		"delete_device" file.
+
+		Example: Destroy the previously-created aggregated GPIO
+		controller "gpio-aggregator.0":
+
+		.. code-block:: bash
+
+		    echo gpio-aggregator.0 > delete_device
+
+
+GPIO Repeater in Device Tree
+----------------------------
+
+A GPIO Repeater is a node in a Device Tree representing a repeater for one or
+more GPIOs, possibly including physical signal property translation (e.g.
+polarity inversion).  This allows to model e.g. inverters in DT.
+
+See Documentation/devicetree/bindings/gpio/gpio-repeater.yaml
+
+
+Generic GPIO Driver
+-------------------
+
+The GPIO Aggregator can also be used as a generic driver for a simple
+GPIO-operated device described in DT, without a dedicated in-kernel driver.
+This is not unlike e.g. spidev, which allows to communicated with an SPI device
+from userspace.
+
+Binding a device to the GPIO Aggregator is performed either by modifying the
+gpio-aggregator driver, or by writing to the "driver_override" file in Sysfs.
+
+Example: If "frobnicator" is a GPIO-operated device described in DT, using its
+own compatible value::
+
+        frobnicator {
+                compatible = "myvendor,frobnicator";
+
+                gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>,
+                        <&gpio2 20 GPIO_ACTIVE_LOW>;
+        };
+
+it can be bound to the GPIO Aggregator by either:
+
+1. Adding its compatible value to ``gpio_aggregator_dt_ids[]``,
+2. Binding manually using "driver_override":
+
+.. code-block:: bash
+
+    echo gpio-aggregator > /sys/bus/platform/devices/frobnicator/driver_override
+    echo frobnicator > /sys/bus/platform/drivers/gpio-aggregator/bind
diff --git a/Documentation/admin-guide/gpio/index.rst b/Documentation/admin-guide/gpio/index.rst
index a244ba4e87d5398a..ef2838638e967777 100644
--- a/Documentation/admin-guide/gpio/index.rst
+++ b/Documentation/admin-guide/gpio/index.rst
@@ -7,6 +7,7 @@ gpio
 .. toctree::
     :maxdepth: 1
 
+    gpio-aggregator
     sysfs
 
 .. only::  subproject and html
-- 
2.17.1


  parent reply index

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-27  8:42 [PATCH v3 0/7] gpio: Add GPIO Aggregator/Repeater Geert Uytterhoeven
2019-11-27  8:42 ` [PATCH v3 1/7] gpiolib: Add GPIOCHIP_NAME definition Geert Uytterhoeven
2019-11-28  3:38   ` Ulrich Hecht
2019-12-02 21:17   ` Eugeniu Rosca
2019-12-12 10:37   ` Linus Walleij
2019-11-27  8:42 ` [PATCH v3 2/7] gpiolib: Add support for gpiochipN-based table lookup Geert Uytterhoeven
2019-11-28  3:38   ` Ulrich Hecht
2019-12-12 13:20   ` Linus Walleij
2019-12-12 13:33     ` Geert Uytterhoeven
2019-12-12 14:36       ` Linus Walleij
2019-11-27  8:42 ` [PATCH v3 3/7] gpiolib: Add support for GPIO line " Geert Uytterhoeven
2019-11-28  3:39   ` Ulrich Hecht
2019-12-12 13:40   ` Linus Walleij
2019-11-27  8:42 ` [PATCH v3 4/7] dt-bindings: gpio: Add gpio-repeater bindings Geert Uytterhoeven
2019-11-28  3:39   ` Ulrich Hecht
2019-12-03  5:51   ` Harish Jenny K N
2019-12-05 21:06   ` Rob Herring
2019-12-06  9:17     ` Geert Uytterhoeven
2019-12-06 15:03       ` Rob Herring
2020-01-06  8:12         ` Geert Uytterhoeven
2020-01-07  9:22           ` Harish Jenny K N
2020-01-16  5:09             ` Harish Jenny K N
2019-11-27  8:42 ` [PATCH v3 5/7] gpio: Add GPIO Aggregator/Repeater driver Geert Uytterhoeven
2019-11-27 14:15   ` Eugeniu Rosca
2019-11-27 14:33     ` Geert Uytterhoeven
2019-11-28  3:40   ` Ulrich Hecht
2019-12-03  5:42   ` Harish Jenny K N
2019-12-03  8:17     ` Geert Uytterhoeven
2019-12-03  8:51       ` Harish Jenny K N
2019-12-03 10:51   ` Eugeniu Rosca
2020-01-09 13:35     ` Geert Uytterhoeven
2020-01-09 13:49       ` Eugeniu Rosca
2019-12-12 14:34   ` Linus Walleij
2019-12-12 15:24     ` Geert Uytterhoeven
2020-01-04  0:38       ` Linus Walleij
2020-01-06  8:23         ` Geert Uytterhoeven
2020-01-08 23:12           ` Linus Walleij
2019-11-27  8:42 ` Geert Uytterhoeven [this message]
2019-11-28  3:41   ` [PATCH v3 6/7] docs: gpio: Add GPIO Aggregator/Repeater documentation Ulrich Hecht
2019-12-12 14:42   ` Linus Walleij
2019-12-12 14:48     ` Geert Uytterhoeven
2020-01-04  0:21       ` Linus Walleij
2020-01-06  8:06         ` Geert Uytterhoeven
2019-11-27  8:42 ` [PATCH v3 7/7] MAINTAINERS: Add GPIO Aggregator/Repeater section Geert Uytterhoeven
2019-12-03  5:38   ` Harish Jenny K N
2020-01-18  1:46 ` [PATCH v3 0/7] gpio: Add GPIO Aggregator/Repeater Eugeniu Rosca
2020-01-20  9:33   ` Geert Uytterhoeven
2020-01-20 12:14     ` Eugeniu Rosca

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191127084253.16356-7-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=bgolaszewski@baylibre.com \
    --cc=christoffer.dall@arm.com \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=erosca@de.adit-jv.com \
    --cc=graf@amazon.com \
    --cc=harish_kandiga@mentor.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=preid@electromag.com.au \
    --cc=qemu-devel@nongnu.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git