[PATCH v4 4/4] dt-bindings: display: add i.MX6 MIPI DSI host controller doc

[Adrian Ratiu <adrian.ratiu@collabora.com>]

This provides an example DT binding for the MIPI DSI host controller
present on the i.MX6 SoC based on Synopsis DesignWare v1.01 IP.

Cc: Rob Herring <robh@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
---
 .../display/imx/fsl,mipi-dsi-imx6.yaml        | 136 ++++++++++++++++++
 1 file changed, 136 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
new file mode 100644
index 000000000000..8c9603c28240
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,mipi-dsi-imx6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 DW MIPI DSI Host Controller
+
+description:
+  The DSI host controller is a Synopsys DesignWare MIPI DSI v1.01 IP with a companion PHY IP.
+
+  These DT bindings follow the Synopsys DW MIPI DSI bindings defined in
+  Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt with
+  the following device-specific properties.
+
+properties:
+  compatible:
+    const: [ "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi" ]
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Module Clock
+      - description: DSI bus clock
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+    minItems: 2
+    maxItems: 2
+
+  fsl,gpr:
+    description: Phandle to the iomuxc-gpr region containing the multiplexer control register.
+    const: *gpr
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+      Documentation/devicetree/bindings/graph.txt
+    properties:
+      port@0:
+        type: object
+        description:
+          DSI input port node, connected to the ltdc rgb output port.
+
+      port@1:
+        type: object
+        description:
+          DSI output port node, connected to a panel or a bridge input port"
+
+patternProperties:
+  "^(panel|panel-dsi)@[0-9]$":
+    type: object
+    description:
+      A node containing the panel or bridge description as documented in
+      Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+    properties:
+      port:
+        type: object
+        description:
+          Panel or bridge port node, connected to the DSI output port (port@1)
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi: dsi@21e0000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
+        reg = <0x021e0000 0x4000>;
+        interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+        fsl,gpr = <&gpr>;
+        clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+                 <&clks IMX6QDL_CLK_MIPI_IPG>;
+        clock-names = "ref", "pclk";
+
+        ports {
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&ltdc_ep1_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+
+        panel@0 {
+            compatible = "sharp,ls032b3sx01";
+            reg = <0>;
+            reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+
+            ports {
+                port@0 {
+                    panel_in: endpoint {
+                        remote-endpoint = <&dsi_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
-- 
2.24.0