Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To: andrew.murray@arm.com, maz@kernel.org,
	linux-kernel@vger.kernel.org,
	Florian Fainelli <f.fainelli@gmail.com>,
	bcm-kernel-feedback-list@broadcom.com,
	Eric Anholt <eric@anholt.net>, Stefan Wahren <wahrenst@gmx.net>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: james.quinlan@broadcom.com, mbrugger@suse.com,
	phil@raspberrypi.org, jeremy.linton@arm.com,
	linux-pci@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Rob Herring <robh@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH v4 1/8] dt-bindings: PCI: Add bindings for brcmstb's PCIe device
Date: Tue,  3 Dec 2019 12:47:34 +0100
Message-ID: <20191203114743.1294-2-nsaenzjulienne@suse.de> (raw)
In-Reply-To: <20191203114743.1294-1-nsaenzjulienne@suse.de>

From: Jim Quinlan <james.quinlan@broadcom.com>

The DT bindings description of the brcmstb PCIe device is described.
This node can only be used for now on the Raspberry Pi 4.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changes since v2:
  - Add pci reference schema
  - Drop all default properties
  - Assume msi-controller and msi-parent are properly defined
  - Add num entries on multiple properties
  - use unevaluatedProperties
  - Update required properties
  - Fix license

Changes since v1:
  - Fix commit Subject
  - Remove linux,pci-domain

This was based on Jim's original submission[1], converted to yaml and
adapted to the RPi4 case.

[1] https://patchwork.kernel.org/patch/10605937/

 .../bindings/pci/brcm,stb-pcie.yaml           | 97 +++++++++++++++++++
 1 file changed, 97 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
new file mode 100644
index 000000000000..77d3e81a437b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Brcmstb PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sw_pcie
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  brcm,enable-ssc:
+    description: Indicates usage of spread-spectrum clocking.
+    type: boolean
+
+required:
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scb {
+            #address-cells = <2>;
+            #size-cells = <1>;
+            pcie0: pcie@7d500000 {
+                    compatible = "brcm,bcm2711-pcie";
+                    reg = <0x0 0x7d500000 0x9310>;
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "pcie", "msi";
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    brcm,enable-ssc;
+            };
+    };
-- 
2.24.0


  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-03 11:47 [PATCH v4 0/8] Raspberry Pi 4 PCIe support Nicolas Saenz Julienne
2019-12-03 11:47 ` Nicolas Saenz Julienne [this message]
2019-12-03 15:03   ` [PATCH v4 1/8] dt-bindings: PCI: Add bindings for brcmstb's PCIe device Andrew Murray
2019-12-03 11:47 ` [PATCH v4 2/8] ARM: dts: bcm2711: Enable PCIe controller Nicolas Saenz Julienne
2019-12-16  6:46   ` Jian-Hong Pan
2019-12-16  9:49     ` Nicolas Saenz Julienne
2019-12-03 11:47 ` [PATCH v4 8/8] linux/log2.h: Use roundup/dow_pow_two() on 64bit calculations Nicolas Saenz Julienne
2019-12-03 15:53   ` Rob Herring
2019-12-03 16:06     ` Nicolas Saenz Julienne
2019-12-05 20:38   ` Bjorn Helgaas
2019-12-12 13:21     ` Nicolas Saenz Julienne

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191203114743.1294-2-nsaenzjulienne@suse.de \
    --to=nsaenzjulienne@suse.de \
    --cc=andrew.murray@arm.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eric@anholt.net \
    --cc=f.fainelli@gmail.com \
    --cc=james.quinlan@broadcom.com \
    --cc=jeremy.linton@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=mbrugger@suse.com \
    --cc=phil@raspberrypi.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=wahrenst@gmx.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git