Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To: andrew.murray@arm.com, maz@kernel.org,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Eric Anholt <eric@anholt.net>, Stefan Wahren <wahrenst@gmx.net>
Cc: james.quinlan@broadcom.com, mbrugger@suse.com,
	f.fainelli@gmail.com, phil@raspberrypi.org,
	jeremy.linton@arm.com, linux-pci@vger.kernel.org,
	linux-rpi-kernel@lists.infradead.org,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	devicetree@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/8] ARM: dts: bcm2711: Enable PCIe controller
Date: Tue,  3 Dec 2019 12:47:35 +0100
Message-ID: <20191203114743.1294-3-nsaenzjulienne@suse.de> (raw)
In-Reply-To: <20191203114743.1294-1-nsaenzjulienne@suse.de>

This enables bcm2711's PCIe bus, which is hardwired to a VIA
Technologies XHCI USB 3.0 controller.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

---

Changes since v3:
  - Remove unwarranted comment

Changes since v2:
  - Remove unused interrupt-map
  - correct dma-ranges to it's full size, non power of 2 bus DMA
    constraints now supported in linux-next[1]
  - add device_type
  - rename alias from pcie_0 to pcie0

Changes since v1:
  - remove linux,pci-domain

 arch/arm/boot/dts/bcm2711.dtsi | 37 ++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 667658497898..5b61cd915f2b 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -288,6 +288,43 @@ IRQ_TYPE_LEVEL_LOW)>,
 		arm,cpu-registers-not-fw-configured;
 	};
 
+	scb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0xc0000000>;
+			brcm,enable-ssc;
+		};
+	};
+
 	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.24.0


  parent reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-03 11:47 [PATCH v4 0/8] Raspberry Pi 4 PCIe support Nicolas Saenz Julienne
2019-12-03 11:47 ` [PATCH v4 1/8] dt-bindings: PCI: Add bindings for brcmstb's PCIe device Nicolas Saenz Julienne
2019-12-03 15:03   ` Andrew Murray
2019-12-03 11:47 ` Nicolas Saenz Julienne [this message]
2019-12-16  6:46   ` [PATCH v4 2/8] ARM: dts: bcm2711: Enable PCIe controller Jian-Hong Pan
2019-12-16  9:49     ` Nicolas Saenz Julienne
2019-12-03 11:47 ` [PATCH v4 8/8] linux/log2.h: Use roundup/dow_pow_two() on 64bit calculations Nicolas Saenz Julienne
2019-12-03 15:53   ` Rob Herring
2019-12-03 16:06     ` Nicolas Saenz Julienne
2019-12-05 20:38   ` Bjorn Helgaas
2019-12-12 13:21     ` Nicolas Saenz Julienne

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191203114743.1294-3-nsaenzjulienne@suse.de \
    --to=nsaenzjulienne@suse.de \
    --cc=andrew.murray@arm.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eric@anholt.net \
    --cc=f.fainelli@gmail.com \
    --cc=james.quinlan@broadcom.com \
    --cc=jeremy.linton@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=mbrugger@suse.com \
    --cc=phil@raspberrypi.org \
    --cc=robh+dt@kernel.org \
    --cc=wahrenst@gmx.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git