[PATCH 1/2] arm64: dts: rockchip: add core dsi components for px30

[PATCH 1/2] arm64: dts: rockchip: add core dsi components for px30

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>

This adds the dw-mipi-dsi controller and the external dsi-dphy
and hooks them into the display-subsystem on px30.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
---
 arch/arm64/boot/dts/rockchip/px30.dtsi | 61 ++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index c31423f36192..ff53cc56f80f 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -820,6 +820,19 @@ u2phy_otg: otg-port {
 		};
 	};
 
+	dsi_dphy: phy@ff2e0000 {
+		compatible = "rockchip,px30-dsi-dphy";
+		reg = <0x0 0xff2e0000 0x0 0x10000>;
+		clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
+		clock-names = "ref", "pclk";
+		#clock-cells = <0>;
+		resets = <&cru SRST_MIPIDSIPHY_P>;
+		reset-names = "apb";
+		#phy-cells = <0>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+	};
+
 	usb20_otg: usb@ff300000 {
 		compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
 			     "snps,dwc2";
@@ -943,6 +956,44 @@ gpu: gpu@ff400000 {
 		status = "disabled";
 	};
 
+	dsi: dsi@ff450000 {
+		compatible = "rockchip,px30-mipi-dsi";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI_DSI>;
+		clock-names = "pclk";
+		resets = <&cru SRST_MIPIDSI_HOST_P>;
+		reset-names = "apb";
+		phys = <&dsi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VO>;
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dsi>;
+				};
+
+				dsi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dsi>;
+				};
+			};
+		};
+	};
+
 	vopb: vop@ff460000 {
 		compatible = "rockchip,px30-vop-big";
 		reg = <0x0 0xff460000 0x0 0xefc>;
@@ -960,6 +1011,11 @@ vopb: vop@ff460000 {
 		vopb_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopb_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopb>;
+			};
 		};
 	};
 
@@ -992,6 +1048,11 @@ vopl: vop@ff470000 {
 		vopl_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopl_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopl>;
+			};
 		};
 	};
 
-- 
2.24.0

[PATCH 2/2] arm64: dts: rockchip: hook up the px30-evb dsi display

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>

Create the necessary display nodes to activate the Xingpeng XPP055C272
dsi display that can be found on the px30-evb.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
---
 arch/arm64/boot/dts/rockchip/px30-evb.dts | 32 +++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 180995a590c1..0a680257d9c2 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -112,6 +112,38 @@ &display_subsystem {
 	status = "okay";
 };
 
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "xinpeng,xpp055c272";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		vci-supply = <&vcc3v3_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
-- 
2.24.0