* [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc
@ 2019-12-12 12:51 Tero Kristo
2019-12-12 12:51 ` [PATCH 1/6] ARM: dts: dra7: convert IOMMUs to use ti-sysc Tero Kristo
` (6 more replies)
0 siblings, 7 replies; 8+ messages in thread
From: Tero Kristo @ 2019-12-12 12:51 UTC (permalink / raw)
To: linux-omap, tony; +Cc: devicetree, bcousson
Hi Tony,
This series converts the IOMMU support for omap4/5 and dra7 to ti-sysc.
Added patches to drop the legacy hwmod data for these also.
-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/6] ARM: dts: dra7: convert IOMMUs to use ti-sysc
2019-12-12 12:51 [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tero Kristo
@ 2019-12-12 12:51 ` Tero Kristo
2019-12-12 12:51 ` [PATCH 2/6] ARM: dts: dra74x: " Tero Kristo
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Tero Kristo @ 2019-12-12 12:51 UTC (permalink / raw)
To: linux-omap, tony; +Cc: devicetree, bcousson
Convert dra7 IOMMUs to use ti-sysc instead of legacy omap-hwmod based
implementation. Enable the IOMMUs also while doing this.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 140 +++++++++++++++++++++++++++---------
1 file changed, 108 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 73e5011f531a..e7c9b81d929a 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -377,44 +377,120 @@
ti,hwmods = "dmm";
};
- mmu0_dsp1: mmu@40d01000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x40d01000 0x100>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu0_dsp1";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp1_system 0x0>;
- status = "disabled";
+ target-module@40d01000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x40d01000 0x4>,
+ <0x40d01010 0x4>,
+ <0x40d01014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp1 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x40d01000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu0_dsp1: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+ };
};
- mmu1_dsp1: mmu@40d02000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x40d02000 0x100>;
- interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu1_dsp1";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp1_system 0x1>;
- status = "disabled";
+ target-module@40d02000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x40d02000 0x4>,
+ <0x40d02010 0x4>,
+ <0x40d02014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp1 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x40d02000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu1_dsp1: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+ };
};
- mmu_ipu1: mmu@58882000 {
- compatible = "ti,dra7-iommu";
- reg = <0x58882000 0x100>;
- interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu1";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
- status = "disabled";
+ target-module@58882000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58882000 0x4>,
+ <0x58882010 0x4>,
+ <0x58882014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_ipu 2>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x58882000 0x100>;
+
+ mmu_ipu1: mmu@0 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
- mmu_ipu2: mmu@55082000 {
- compatible = "ti,dra7-iommu";
- reg = <0x55082000 0x100>;
- interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu2";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
- status = "disabled";
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x55082000 0x100>;
+
+ mmu_ipu2: mmu@0 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
abb_mpu: regulator-abb-mpu {
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/6] ARM: dts: dra74x: convert IOMMUs to use ti-sysc
2019-12-12 12:51 [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tero Kristo
2019-12-12 12:51 ` [PATCH 1/6] ARM: dts: dra7: convert IOMMUs to use ti-sysc Tero Kristo
@ 2019-12-12 12:51 ` Tero Kristo
2019-12-12 12:51 ` [PATCH 3/6] ARM: dts: omap4: " Tero Kristo
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Tero Kristo @ 2019-12-12 12:51 UTC (permalink / raw)
To: linux-omap, tony; +Cc: devicetree, bcousson
Convert dra74x IOMMUs to use ti-sysc instead of legacy omap-hwmod based
implementation. Enable the IOMMUs also while doing this.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/boot/dts/dra74x.dtsi | 71 +++++++++++++++++++++++++++--------
1 file changed, 55 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index d1b5b76bc5a8..c5abc436ca1f 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -66,24 +66,63 @@
};
};
- mmu0_dsp2: mmu@41501000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x41501000 0x100>;
- interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu0_dsp2";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp2_system 0x0>;
- status = "disabled";
+ target-module@41501000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x41501000 0x4>,
+ <0x41501010 0x4>,
+ <0x41501014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp2 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x41501000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu0_dsp2: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+ };
};
- mmu1_dsp2: mmu@41502000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x41502000 0x100>;
- interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu1_dsp2";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp2_system 0x1>;
- status = "disabled";
+ target-module@41502000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x41502000 0x4>,
+ <0x41502010 0x4>,
+ <0x41502014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+
+ clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp2 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x41502000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu1_dsp2: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+ };
};
};
};
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 3/6] ARM: dts: omap4: convert IOMMUs to use ti-sysc
2019-12-12 12:51 [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tero Kristo
2019-12-12 12:51 ` [PATCH 1/6] ARM: dts: dra7: convert IOMMUs to use ti-sysc Tero Kristo
2019-12-12 12:51 ` [PATCH 2/6] ARM: dts: dra74x: " Tero Kristo
@ 2019-12-12 12:51 ` Tero Kristo
2019-12-12 12:51 ` [PATCH 4/6] ARM: dts: omap5: " Tero Kristo
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Tero Kristo @ 2019-12-12 12:51 UTC (permalink / raw)
To: linux-omap, tony; +Cc: devicetree, bcousson
Convert omap4 IOMMUs to use ti-sysc instead of legacy omap-hwmod based
implementation. Enable the IOMMUs also while doing this.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/boot/dts/omap4-l4.dtsi | 11 ++++++---
arch/arm/boot/dts/omap4.dtsi | 43 +++++++++++++++++++++------------
2 files changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index 83f803be8ee2..8a76b6b86a97 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -321,7 +321,6 @@
target-module@66000 { /* 0x4a066000, ap 25 26.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "mmu_dsp";
reg = <0x66000 0x4>,
<0x66010 0x4>,
<0x66014 0x4>;
@@ -335,12 +334,18 @@
/* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
clock-names = "fck";
+ resets = <&prm_tesla 1>;
+ reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x66000 0x1000>;
- /* mmu_dsp cannot be moved before reset driver */
- status = "disabled";
+ mmu_dsp: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 2de8a6b53de9..af901fc6e909 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -173,14 +173,6 @@
#gpio-cells = <2>;
};
- mmu_dsp: mmu@4a066000 {
- compatible = "ti,omap4-iommu";
- reg = <0x4a066000 0x100>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_dsp";
- #iommu-cells = <0>;
- };
-
target-module@52000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "iss";
@@ -206,14 +198,35 @@
/* No child device binding, driver in staging */
};
- mmu_ipu: mmu@55082000 {
- compatible = "ti,omap4-iommu";
- reg = <0x55082000 0x100>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x55082000 0x100>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu_ipu: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
+
target-module@4012c000 {
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "slimbus1";
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 4/6] ARM: dts: omap5: convert IOMMUs to use ti-sysc
2019-12-12 12:51 [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tero Kristo
` (2 preceding siblings ...)
2019-12-12 12:51 ` [PATCH 3/6] ARM: dts: omap4: " Tero Kristo
@ 2019-12-12 12:51 ` Tero Kristo
2019-12-12 12:51 ` [PATCH 5/6] ARM: OMAP4: hwmod-data: remove OMAP4 IOMMU hwmod data Tero Kristo
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Tero Kristo @ 2019-12-12 12:51 UTC (permalink / raw)
To: linux-omap, tony; +Cc: devicetree, bcousson
Convert omap5 IOMMUs to use ti-sysc instead of legacy omap-hwmod based
implementation. Enable the IOMMUs also while doing this.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/boot/dts/omap5-l4.dtsi | 11 ++++++---
arch/arm/boot/dts/omap5.dtsi | 40 +++++++++++++++++++++------------
2 files changed, 34 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 25aacf1ba708..a29261dea3e2 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -349,7 +349,6 @@
target-module@66000 { /* 0x4a066000, ap 23 0a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "mmu_dsp";
reg = <0x66000 0x4>,
<0x66010 0x4>,
<0x66014 0x4>;
@@ -364,12 +363,18 @@
/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
clock-names = "fck";
+ resets = <&prm_dsp 1>;
+ reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x66000 0x1000>;
- /* mmu_dsp cannot be moved before reset driver */
- status = "disabled";
+ mmu_dsp: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ };
};
target-module@70000 { /* 0x4a070000, ap 79 2e.0 */
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 1f6ad1debc90..d0ecf54d5a23 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -186,21 +186,33 @@
#gpio-cells = <2>;
};
- mmu_dsp: mmu@4a066000 {
- compatible = "ti,omap4-iommu";
- reg = <0x4a066000 0x100>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_dsp";
- #iommu-cells = <0>;
- };
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x55082000 0x100>;
+ #size-cells = <1>;
+ #address-cells = <1>;
- mmu_ipu: mmu@55082000 {
- compatible = "ti,omap4-iommu";
- reg = <0x55082000 0x100>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
+ mmu_ipu: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
dmm@4e000000 {
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 5/6] ARM: OMAP4: hwmod-data: remove OMAP4 IOMMU hwmod data
2019-12-12 12:51 [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tero Kristo
` (3 preceding siblings ...)
2019-12-12 12:51 ` [PATCH 4/6] ARM: dts: omap5: " Tero Kristo
@ 2019-12-12 12:51 ` Tero Kristo
2019-12-12 12:51 ` [PATCH 6/6] ARM: OMAP5: hwmod-data: remove OMAP5 " Tero Kristo
2019-12-17 17:50 ` [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tony Lindgren
6 siblings, 0 replies; 8+ messages in thread
From: Tero Kristo @ 2019-12-12 12:51 UTC (permalink / raw)
To: linux-omap, tony; +Cc: devicetree, bcousson
IOMMUs are now supported via ti-sysc, so the legacy hwmod data can be
removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 87 ----------------------
1 file changed, 87 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 292f544bd62d..8196c5b3e736 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1303,91 +1303,6 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
},
};
-/*
- * 'mmu' class
- * The memory management unit performs virtual to physical address translation
- * for its requestors.
- */
-
-static struct omap_hwmod_class_sysconfig mmu_sysc = {
- .rev_offs = 0x000,
- .sysc_offs = 0x010,
- .syss_offs = 0x014,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_mmu_hwmod_class = {
- .name = "mmu",
- .sysc = &mmu_sysc,
-};
-
-/* mmu ipu */
-
-static struct omap_hwmod omap44xx_mmu_ipu_hwmod;
-static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = {
- { .name = "mmu_cache", .rst_shift = 2 },
-};
-
-/* l3_main_2 -> mmu_ipu */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_mmu_ipu_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod omap44xx_mmu_ipu_hwmod = {
- .name = "mmu_ipu",
- .class = &omap44xx_mmu_hwmod_class,
- .clkdm_name = "ducati_clkdm",
- .rst_lines = omap44xx_mmu_ipu_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap44xx_mmu_ipu_resets),
- .main_clk = "ducati_clk_mux_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET,
- .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
- .context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* mmu dsp */
-
-static struct omap_hwmod omap44xx_mmu_dsp_hwmod;
-static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = {
- { .name = "mmu_cache", .rst_shift = 1 },
-};
-
-/* l4_cfg -> dsp */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_mmu_dsp_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod omap44xx_mmu_dsp_hwmod = {
- .name = "mmu_dsp",
- .class = &omap44xx_mmu_hwmod_class,
- .clkdm_name = "tesla_clkdm",
- .rst_lines = omap44xx_mmu_dsp_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap44xx_mmu_dsp_resets),
- .main_clk = "dpll_iva_m4x2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET,
- .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
- .context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
/*
* 'mpu' class
* mpu sub-system
@@ -3012,8 +2927,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l3_main_2__iva,
&omap44xx_l4_wkup__kbd,
&omap44xx_l4_abe__mcpdm,
- &omap44xx_l3_main_2__mmu_ipu,
- &omap44xx_l4_cfg__mmu_dsp,
&omap44xx_l3_main_2__ocmc_ram,
&omap44xx_l4_cfg__ocp2scp_usb_phy,
&omap44xx_mpu_private__prcm_mpu,
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 6/6] ARM: OMAP5: hwmod-data: remove OMAP5 IOMMU hwmod data
2019-12-12 12:51 [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tero Kristo
` (4 preceding siblings ...)
2019-12-12 12:51 ` [PATCH 5/6] ARM: OMAP4: hwmod-data: remove OMAP4 IOMMU hwmod data Tero Kristo
@ 2019-12-12 12:51 ` Tero Kristo
2019-12-17 17:50 ` [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tony Lindgren
6 siblings, 0 replies; 8+ messages in thread
From: Tero Kristo @ 2019-12-12 12:51 UTC (permalink / raw)
To: linux-omap, tony; +Cc: devicetree, bcousson
IOMMUs are now supported via ti-sysc, so the legacy hwmod data can be
removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 83 ----------------------
1 file changed, 83 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index cc5ad6acab1d..e48b09c18144 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -677,71 +677,6 @@ static struct omap_hwmod omap54xx_mcpdm_hwmod = {
};
-/*
- * 'mmu' class
- * The memory management unit performs virtual to physical address translation
- * for its requestors.
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_mmu_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_mmu_hwmod_class = {
- .name = "mmu",
- .sysc = &omap54xx_mmu_sysc,
-};
-
-static struct omap_hwmod_rst_info omap54xx_mmu_dsp_resets[] = {
- { .name = "mmu_cache", .rst_shift = 1 },
-};
-
-static struct omap_hwmod omap54xx_mmu_dsp_hwmod = {
- .name = "mmu_dsp",
- .class = &omap54xx_mmu_hwmod_class,
- .clkdm_name = "dsp_clkdm",
- .rst_lines = omap54xx_mmu_dsp_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap54xx_mmu_dsp_resets),
- .main_clk = "dpll_iva_h11x2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_DSP_DSP_CLKCTRL_OFFSET,
- .rstctrl_offs = OMAP54XX_RM_DSP_RSTCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_DSP_DSP_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* mmu ipu */
-static struct omap_hwmod_rst_info omap54xx_mmu_ipu_resets[] = {
- { .name = "mmu_cache", .rst_shift = 2 },
-};
-
-static struct omap_hwmod omap54xx_mmu_ipu_hwmod = {
- .name = "mmu_ipu",
- .class = &omap54xx_mmu_hwmod_class,
- .clkdm_name = "ipu_clkdm",
- .rst_lines = omap54xx_mmu_ipu_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap54xx_mmu_ipu_resets),
- .main_clk = "dpll_core_h22x2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_IPU_IPU_CLKCTRL_OFFSET,
- .rstctrl_offs = OMAP54XX_RM_IPU_RSTCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_IPU_IPU_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
/*
* 'mpu' class
* mpu sub-system
@@ -1303,14 +1238,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_cfg -> mmu_dsp */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mmu_dsp = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_mmu_dsp_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* mpu -> l3_main_1 */
static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = {
.master = &omap54xx_mpu_hwmod,
@@ -1335,14 +1262,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l3_main_2 -> mmu_ipu */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__mmu_ipu = {
- .master = &omap54xx_l3_main_2_hwmod,
- .slave = &omap54xx_mmu_ipu_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l3_main_1 -> l3_main_3 */
static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = {
.master = &omap54xx_l3_main_1_hwmod,
@@ -1675,7 +1594,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l4_wkup__counter_32k,
&omap54xx_l4_cfg__dma_system,
&omap54xx_l4_abe__dmic,
- &omap54xx_l4_cfg__mmu_dsp,
&omap54xx_l3_main_2__dss,
&omap54xx_l3_main_2__dss_dispc,
&omap54xx_l3_main_2__dss_dsi1_a,
@@ -1684,7 +1602,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l3_main_2__dss_rfbi,
&omap54xx_mpu__emif1,
&omap54xx_mpu__emif2,
- &omap54xx_l3_main_2__mmu_ipu,
&omap54xx_l4_wkup__kbd,
&omap54xx_l4_abe__mcpdm,
&omap54xx_l4_cfg__mpu,
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc
2019-12-12 12:51 [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tero Kristo
` (5 preceding siblings ...)
2019-12-12 12:51 ` [PATCH 6/6] ARM: OMAP5: hwmod-data: remove OMAP5 " Tero Kristo
@ 2019-12-17 17:50 ` Tony Lindgren
6 siblings, 0 replies; 8+ messages in thread
From: Tony Lindgren @ 2019-12-17 17:50 UTC (permalink / raw)
To: Tero Kristo; +Cc: linux-omap, devicetree, bcousson
* Tero Kristo <t-kristo@ti.com> [191212 04:52]:
> Hi Tony,
>
> This series converts the IOMMU support for omap4/5 and dra7 to ti-sysc.
> Added patches to drop the legacy hwmod data for these also.
Thanks I applied the dts changes into omap-for-v5.6/ti-sysc-dt
and platform data removal into omap-for-v5.6/ti-sysc-drop-pdata.
Regards,
Tony
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-12-17 17:50 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-12 12:51 [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tero Kristo
2019-12-12 12:51 ` [PATCH 1/6] ARM: dts: dra7: convert IOMMUs to use ti-sysc Tero Kristo
2019-12-12 12:51 ` [PATCH 2/6] ARM: dts: dra74x: " Tero Kristo
2019-12-12 12:51 ` [PATCH 3/6] ARM: dts: omap4: " Tero Kristo
2019-12-12 12:51 ` [PATCH 4/6] ARM: dts: omap5: " Tero Kristo
2019-12-12 12:51 ` [PATCH 5/6] ARM: OMAP4: hwmod-data: remove OMAP4 IOMMU hwmod data Tero Kristo
2019-12-12 12:51 ` [PATCH 6/6] ARM: OMAP5: hwmod-data: remove OMAP5 " Tero Kristo
2019-12-17 17:50 ` [PATCH 0/6] ARM: omap4/5/dra7: convert iommu support to ti-sysc Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).