[PATCH] dt-bindings: rcc: Convert stm32mp1 rcc bindings to json-schema

* [PATCH] dt-bindings: rcc: Convert stm32mp1 rcc bindings to json-schema
@ 2019-12-02 15:03 gabriel.fernandez
  2019-12-13 23:26 ` Rob Herring
  0 siblings, 1 reply; 2+ messages in thread
From: gabriel.fernandez @ 2019-12-02 15:03 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue
  Cc: linux-clk, devicetree, linux-stm32, linux-arm-kernel,
	linux-kernel, Gabriel Fernandez

From: Gabriel Fernandez <gabriel.fernandez@st.com>

Convert the STM32MP1 RCC binding to DT schema format using json-schema.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 .../bindings/clock/st,stm32mp1-rcc.txt        | 60 --------------
 .../bindings/clock/st,stm32mp1-rcc.yaml       | 79 +++++++++++++++++++
 2 files changed, 79 insertions(+), 60 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
 create mode 100644 Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml

diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
deleted file mode 100644
index fb9495ea582c..000000000000
--- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-STMicroelectronics STM32 Peripheral Reset Clock Controller
-==========================================================
-
-The RCC IP is both a reset and a clock controller.
-
-RCC makes also power management (resume/supend and wakeup interrupt).
-
-Please also refer to reset.txt for common reset controller binding usage.
-
-Please also refer to clock-bindings.txt for common clock controller
-binding usage.
-
-
-Required properties:
-- compatible: "st,stm32mp1-rcc", "syscon"
-- reg: should be register base and length as documented in the datasheet
-- #clock-cells: 1, device nodes should specify the clock in their
-  "clocks" property, containing a phandle to the clock device node,
-  an index specifying the clock to use.
-- #reset-cells: Shall be 1
-- interrupts: Should contain a general interrupt line and a interrupt line
-  to the wake-up of processor (CSTOP).
-
-Example:
-	rcc: rcc@50000000 {
-		compatible = "st,stm32mp1-rcc", "syscon";
-		reg = <0x50000000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>,
-			     <GIC_SPI 145 IRQ_TYPE_NONE>;
-	};
-
-Specifying clocks
-=================
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/stm32mp1-clks.h header and can be used in device
-tree sources.
-
-Specifying softreset control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the reset device node and an index specifying
-which channel to use.
-The index is the bit number within the RCC registers bank, starting from RCC
-base address.
-It is calculated as: index = register_offset / 4 * 32 + bit_offset.
-Where bit_offset is the bit offset within the register.
-
-For example on STM32MP1, for LTDC reset:
- ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset
-      = 0x180 / 4 * 32 + 0 = 3072
-
-The list of valid indices for STM32MP1 is available in:
-include/dt-bindings/reset-controller/stm32mp1-resets.h
-
-This file implements defines like:
-#define LTDC_R	3072
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
new file mode 100644
index 000000000000..b8f91e444d2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/st,stm32mp1-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reset Clock Controller Binding
+
+maintainers:
+  - Gabriel Fernandez <gabriel.fernandez@st.com>
+
+description: |
+  The RCC IP is both a reset and a clock controller.
+  RCC makes also power management (resume/supend and wakeup interrupt).
+  Please also refer to reset.txt for common reset controller binding usage.
+
+  This binding uses common clock bindings
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+  Specifying clocks
+  =================
+
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/stm32mp1-clks.h header and can be used in device
+  tree sources.
+
+  Specifying softreset control of devices
+  =======================================
+
+  Device nodes should specify the reset channel required in their "resets"
+  property, containing a phandle to the reset device node and an index specifying
+  which channel to use.
+  The index is the bit number within the RCC registers bank, starting from RCC
+  base address.
+  It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+  Where bit_offset is the bit offset within the register.
+
+  For example on STM32MP1, for LTDC reset:
+     ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset
+          = 0x180 / 4 * 32 + 0 = 3072
+
+  The list of valid indices for STM32MP1 is available in:
+  include/dt-bindings/reset-controller/stm32mp1-resets.h
+
+  This file implements defines like:
+  #define LTDC_R	3072
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    items:
+      - const: st,stm32mp1-rcc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rcc: rcc@50000000 {
+        compatible = "st,stm32mp1-rcc", "syscon";
+        reg = <0x50000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+...
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread