From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To: andrew.murray@arm.com, maz@kernel.org,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: james.quinlan@broadcom.com, mbrugger@suse.com,
f.fainelli@gmail.com, phil@raspberrypi.org, wahrenst@gmx.net,
jeremy.linton@arm.com, linux-pci@vger.kernel.org,
linux-rpi-kernel@lists.infradead.org, devicetree@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 2/6] ARM: dts: bcm2711: Enable PCIe controller
Date: Mon, 16 Dec 2019 12:01:08 +0100 [thread overview]
Message-ID: <20191216110113.30436-3-nsaenzjulienne@suse.de> (raw)
In-Reply-To: <20191216110113.30436-1-nsaenzjulienne@suse.de>
This enables bcm2711's PCIe bus, which is hardwired to a VIA
Technologies XHCI USB 3.0 controller.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
Changes since v4:
- Rebase commit taking into account genet support series
Changes since v3:
- Remove unwarranted comment
Changes since v2:
- Remove unused interrupt-map
- correct dma-ranges to it's full size, non power of 2 bus DMA
constraints now supported in linux-next[1]
- add device_type
- rename alias from pcie_0 to pcie0
Changes since v1:
- remove linux,pci-domain
[1] https://lkml.org/lkml/2019/11/21/235
arch/arm/boot/dts/bcm2711.dtsi | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index e2f6ffb00aa9..b56388ce1216 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -331,7 +331,36 @@ scb {
#address-cells = <2>;
#size-cells = <1>;
- ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>;
+ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>,
+ <0x6 0x00000000 0x6 0x00000000 0x40000000>;
+
+ pcie0: pcie@7d500000 {
+ compatible = "brcm,bcm2711-pcie";
+ reg = <0x0 0x7d500000 0x9310>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+ IRQ_TYPE_LEVEL_HIGH>;
+ msi-controller;
+ msi-parent = <&pcie0>;
+
+ ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+ 0x0 0x04000000>;
+ /*
+ * The wrapper around the PCIe block has a bug
+ * preventing it from accessing beyond the first 3GB of
+ * memory.
+ */
+ dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+ 0x0 0xc0000000>;
+ brcm,enable-ssc;
+ };
genet: ethernet@7d580000 {
compatible = "brcm,bcm2711-genet-v5";
--
2.24.0
next prev parent reply other threads:[~2019-12-16 11:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-16 11:01 [PATCH v5 0/6] Raspberry Pi 4 PCIe support Nicolas Saenz Julienne
2019-12-16 11:01 ` [PATCH v5 1/6] dt-bindings: PCI: Add bindings for brcmstb's PCIe device Nicolas Saenz Julienne
2019-12-16 11:14 ` Matthias Brugger
2019-12-16 11:18 ` Nicolas Saenz Julienne
2019-12-16 11:01 ` Nicolas Saenz Julienne [this message]
2020-01-14 18:11 ` [PATCH v5 2/6] ARM: dts: bcm2711: Enable PCIe controller Lorenzo Pieralisi
2020-01-14 18:15 ` Florian Fainelli
2020-01-15 23:41 ` Florian Fainelli
2019-12-16 11:36 ` [PATCH v5 0/6] Raspberry Pi 4 PCIe support Andrew Murray
2019-12-16 11:45 ` Nicolas Saenz Julienne
2020-01-15 12:02 ` Lorenzo Pieralisi
2020-01-15 12:45 ` Nicolas Saenz Julienne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191216110113.30436-3-nsaenzjulienne@suse.de \
--to=nsaenzjulienne@suse.de \
--cc=andrew.murray@arm.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=james.quinlan@broadcom.com \
--cc=jeremy.linton@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=mbrugger@suse.com \
--cc=phil@raspberrypi.org \
--cc=robh+dt@kernel.org \
--cc=wahrenst@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).