From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v2 6/6] arm64: dts: renesas: r8a77961: Add SDHI nodes
Date: Mon, 16 Dec 2019 13:47:40 +0100 [thread overview]
Message-ID: <20191216124740.16647-7-geert+renesas@glider.be> (raw)
In-Reply-To: <20191216124740.16647-1-geert+renesas@glider.be>
Add device nodes for the SDHI Interfaces on the Renesas R-Car M3-W+
(r8a77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
- No changes.
Test procedure (eMMC):
1. "hd /dev/mmcblk0boot1".
---
arch/arm64/boot/dts/renesas/r8a77961.dtsi | 39 +++++++++++++++++++++--
1 file changed, 36 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 77fbe0f508a50778..be3824bda632233e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -905,18 +905,51 @@
};
sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a77961",
+ "renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
- /* placeholder */
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee120000 {
+ compatible = "renesas,sdhi-r8a77961",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee120000 0 0x2000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
+ status = "disabled";
};
sdhi2: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a77961",
+ "renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
- /* placeholder */
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ status = "disabled";
};
sdhi3: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a77961",
+ "renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
- /* placeholder */
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
+ status = "disabled";
};
gic: interrupt-controller@f1010000 {
--
2.17.1
next prev parent reply other threads:[~2019-12-16 12:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-16 12:47 [PATCH v2 0/6] arm64: dts: renesas: r8a77961: Add more device nodes Geert Uytterhoeven
2019-12-16 12:47 ` [PATCH v2 1/6] arm64: dts: renesas: r8a77961: Add RWDT node Geert Uytterhoeven
2019-12-17 14:10 ` Eugeniu Rosca
2019-12-16 12:47 ` [PATCH v2 2/6] arm64: dts: renesas: r8a77961: Add GPIO nodes Geert Uytterhoeven
2019-12-17 14:19 ` Eugeniu Rosca
2019-12-16 12:47 ` [PATCH v2 3/6] arm64: dts: renesas: r8a77961: Add RAVB node Geert Uytterhoeven
2019-12-17 14:07 ` Eugeniu Rosca
2019-12-16 12:47 ` [PATCH v2 4/6] arm64: dts: renesas: r8a77961: Add SYS-DMAC nodes Geert Uytterhoeven
2019-12-17 16:38 ` Eugeniu Rosca
2019-12-16 12:47 ` [PATCH v2 5/6] arm64: dts: renesas: r8a77961: Add I2C nodes Geert Uytterhoeven
2019-12-17 14:14 ` Eugeniu Rosca
2019-12-16 12:47 ` Geert Uytterhoeven [this message]
2019-12-17 14:30 ` [PATCH v2 6/6] arm64: dts: renesas: r8a77961: Add SDHI nodes Eugeniu Rosca
2019-12-17 12:01 ` [PATCH v2 0/6] arm64: dts: renesas: r8a77961: Add more device nodes Eugeniu Rosca
2019-12-17 12:19 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191216124740.16647-7-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=erosca@de.adit-jv.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).