From: Akash Gajjar <akash@openedev.com>
To: heiko@sntech.de
Cc: jagan@openedev.com, tom@radxa.com, kever.yang@rock-chips.com,
Akash Gajjar <akash@openedev.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Andy Yan <andy.yan@rock-chips.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org
Subject: [PATCH 1/2] arch: arm64: rockchip: add usb node for RK3308
Date: Tue, 17 Dec 2019 13:27:14 +0530 [thread overview]
Message-ID: <20191217075722.11646-2-akash@openedev.com> (raw)
In-Reply-To: <20191217075722.11646-1-akash@openedev.com>
Add the ehci/ochi usb node support for the RK3308 soc.
Signed-off-by: Akash Gajjar <akash@openedev.com>
---
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 49 ++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 8bdc66c62975..4e51362b5373 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -243,6 +243,33 @@
status = "disabled";
};
+ usb2phy_grf: syscon@ff008000 {
+ compatible = "rockchip,rk3308-usb2phy-grf", "syscon",
+ "simple-mfd";
+ reg = <0x0 0xff008000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy: usb2-phy@100 {
+ compatible = "rockchip,rk3308-usb2phy";
+ reg = <0x100 0x10>;
+ clocks = <&cru SCLK_USBPHY_REF>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&cru USB480M>;
+ assigned-clock-parents = <&u2phy>;
+ clock-output-names = "usb480m_phy";
+ status = "disabled";
+
+ u2phy_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+ };
+ };
+
wdt: watchdog@ff080000 {
compatible = "snps,dw-wdt";
reg = <0x0 0xff080000 0x0 0x100>;
@@ -584,6 +611,28 @@
status = "disabled";
};
+ usb_host_ehci: usb@ff440000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xff440000 0x0 0x10000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
+ clock-names = "usbhost", "arbiter", "utmi";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host_ohci: usb@ff450000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xff450000 0x0 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
+ clock-names = "usbhost", "arbiter", "utmi";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
sdmmc: dwmmc@ff480000 {
compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff480000 0x0 0x4000>;
--
2.17.1
next prev parent reply other threads:[~2019-12-17 7:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-17 7:57 [PATCH 0/2] add usb2-phy support for RK3308 SoC Akash Gajjar
2019-12-17 7:57 ` Akash Gajjar [this message]
2019-12-17 7:57 ` [PATCH 2/2] phy: phy-rockchip-inno-usb2: " Akash Gajjar
2019-12-26 21:07 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191217075722.11646-2-akash@openedev.com \
--to=akash@openedev.com \
--cc=andy.yan@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jagan@openedev.com \
--cc=kever.yang@rock-chips.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tom@radxa.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).