Re: [PATCH 09/13] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC

[Rob Herring <robh@kernel.org>]

On Mon, Dec 09, 2019 at 02:51:43PM +0530, Kishon Vijay Abraham I wrote:
> Add host mode dt-bindings for TI's J721E SoC.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  .../bindings/pci/ti,j721e-pci-host.yaml       | 161 ++++++++++++++++++
>  1 file changed, 161 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
> new file mode 100644
> index 000000000000..96184e1f419f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
> @@ -0,0 +1,161 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: TI J721E PCI Host (PCIe Wrapper)
> +
> +maintainers:
> +  - Kishon Vijay Abraham I <kishon@ti.com>

There's now a PCI bus schema. Reference it here:

allOf:
  - $ref: "/schemas/pci/pci-bus.yaml#"

> +
> +properties:
> +  compatible:
> +      enum:
> +          - ti,j721e-pcie-host

Indentation.

> +
> +  reg:
> +    maxItems: 4
> +
> +  reg-names:
> +    items:
> +      - const: intd_cfg
> +      - const: user_cfg
> +      - const: reg
> +      - const: cfg
> +
> +  ti,syscon-pcie-ctrl:
> +    description: Phandle to the SYSCON entry required for configuring PCIe mode
> +                 and link speed.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/phandle

You can drop the 'allOf' here if there aren't more constraints.

> +
> +  max-link-speed:
> +    minimum: 1
> +    maximum: 3
> +
> +  num-lanes:
> +    minimum: 1
> +    maximum: 2
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description: clock-specifier to represent input to the PCIe
> +
> +  clock-names:
> +    items:
> +      - const: fck
> +

> +  "#address-cells":
> +    const: 3
> +
> +  "#size-cells":
> +    const: 2
> +
> +  bus-range:
> +    description: Range of bus numbers associated with this controller.

Drop these 3 as they are all standard.

> +
> +  cdns,max-outbound-regions:
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/int32

Can be negative? Use uint32.

The int* definitions are kind of broken until dtc is fixed to maintain 
sign.

> +      - enum: [16]

const: 16

> +
> +  cdns,no-bar-match-nbits:
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/int32
> +      - enum: [64]
> +
> +  vendor-id:
> +    const: 0x104c
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt

And elsewhere. Drop the description.

> +
> +  device-id:
> +    const: 0xb00d
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +
> +  msi-map: true
> +
> +  dma-coherent:
> +    description: Indicates that the PCIe IP block can ensure the coherency
> +
> +  ranges: true

Don't you know how many?

> +
> +  reset-gpios:
> +    description: GPIO specifier for the PERST# signal
> +
> +  phys:
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +
> +  phy-names:
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - ti,syscon-pcie-ctrl
> +  - max-link-speed
> +  - num-lanes
> +  - power-domains
> +  - clocks
> +  - clock-names

> +  - "#address-cells"
> +  - "#size-cells"

Can drop these 2. The bus schema requires them.

> +  - bus-range
> +  - cdns,max-outbound-regions
> +  - cdns,no-bar-match-nbits
> +  - vendor-id
> +  - device-id
> +  - msi-map
> +  - dma-coherent
> +  - ranges

Can drop, too.

> +  - reset-gpios

Isn't having this board dependent?

> +  - phys
> +  - phy-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +
> +    pcie0_rc: pcie@2900000 {
> +            compatible = "ti,j721e-pcie-host";
> +            reg = <0x00 0x02900000 0x00 0x1000>,
> +                  <0x00 0x02907000 0x00 0x400>,
> +                  <0x00 0x0d000000 0x00 0x00800000>,
> +                  <0x00 0x10000000 0x00 0x00001000>;
> +            reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
> +            ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
> +            max-link-speed = <3>;
> +            num-lanes = <2>;
> +            power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
> +            clocks = <&k3_clks 239 1>;
> +            clock-names = "fck";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            bus-range = <0x0 0xf>;
> +            cdns,max-outbound-regions = <16>;
> +            cdns,no-bar-match-nbits = <64>;
> +            vendor-id = /bits/ 16 <0x104c>;
> +            device-id = /bits/ 16 <0xb00d>;
> +            msi-map = <0x0 &gic_its 0x0 0x10000>;
> +            dma-coherent;
> +            reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
> +            phys = <&serdes0_pcie_link>;
> +            phy-names = "pcie_phy";
> +            ranges = <0x01000000 0x0 0x10001000  0x00 0x10001000  0x0 0x0010000>,
> +                     <0x02000000 0x0 0x10011000  0x00 0x10011000  0x0 0x7fef000>;
> +    };
> -- 
> 2.17.1
>