From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH v2 2/2] arm64: dts: qcom: msm8996: Use generic QMP driver for UFS
Date: Thu, 19 Dec 2019 22:03:04 -0800 [thread overview]
Message-ID: <20191220060304.1867795-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20191220060304.1867795-1-bjorn.andersson@linaro.org>
With support for the MSM8996 UFS PHY added to the common QMP driver,
migrate the DTS to use the common QMP binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v1:
- None
arch/arm64/boot/dts/qcom/msm8996.dtsi | 33 +++++++++++++++------------
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b302d2451007..330a1e7cb7d8 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1323,27 +1323,30 @@ spmi_bus: qcom,spmi@400f000 {
#interrupt-cells = <4>;
};
- ufsphy: phy@627000 {
- compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
- reg = <0x627000 0xda8>;
- reg-names = "phy_mem";
- #phy-cells = <0>;
+ ufs_phy: phy@627000 {
+ compatible = "qcom,msm8996-qmp-ufs-phy";
+ reg = <0x00627000 0x1c4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
vdda-phy-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
-
- vdda-phy-max-microamp = <18380>;
- vdda-pll-max-microamp = <9440>;
-
vddp-ref-clk-supply = <&pm8994_l25>;
- vddp-ref-clk-max-microamp = <100>;
- vddp-ref-clk-always-on;
- clock-names = "ref_clk_src", "ref_clk";
- clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_UFS_CLKREF_CLK>;
+ clocks = <&gcc GCC_UFS_CLKREF_CLK>;
+ clock-names = "ref";
+
resets = <&ufshc 0>;
+ reset-names = "ufsphy";
status = "disabled";
+
+ ufs_phy_lane: lanes@627400 {
+ reg = <0x627400 0x12c>,
+ <0x627600 0x200>,
+ <0x627c00 0x1b4>;
+ #phy-cells = <0>;
+ };
};
ufshc: ufshc@624000 {
@@ -1351,7 +1354,7 @@ ufshc: ufshc@624000 {
reg = <0x624000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufsphy>;
+ phys = <&ufs_phy_lane>;
phy-names = "ufsphy";
vcc-supply = <&pm8994_l20>;
--
2.24.0
next prev parent reply other threads:[~2019-12-20 6:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 6:03 [PATCH v2 0/2] phy: qcom-qmp: Add MSM8996 UFS QMP support Bjorn Andersson
2019-12-20 6:03 ` [PATCH v2 1/2] " Bjorn Andersson
2019-12-20 6:03 ` Bjorn Andersson [this message]
2019-12-20 7:55 ` [PATCH v2 0/2] " Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191220060304.1867795-3-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).