Re: [PATCH] ASoC: dt-bindings: stm32: convert i2s to json-schema

[Rob Herring <robh@kernel.org>]

On Mon, Jan 27, 2020 at 01:54:20PM +0100, Olivier Moysan wrote:
> Convert the STM32 I2S bindings to DT schema format using json-schema.
> 
> Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
> ---
> The items for dma-names and clock-names properties are all
> mandatory, but may be provided in any order.
> The syntax used for these properties allows to avoid order constraint.

Other than having .dts files with differing order, I don't see any 
reason we need to allow any order here. So decide which order is most 
prevalent and use that, and then fix the other dts files.

> ---
>  .../bindings/sound/st,stm32-i2s.txt           | 62 -------------
>  .../bindings/sound/st,stm32-i2s.yaml          | 91 +++++++++++++++++++
>  2 files changed, 91 insertions(+), 62 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
> deleted file mode 100644
> index cbf24bcd1b8d..000000000000
> --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
> +++ /dev/null
> @@ -1,62 +0,0 @@
> -STMicroelectronics STM32 SPI/I2S Controller
> -
> -The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
> -Only some SPI instances support I2S.
> -
> -Required properties:
> -  - compatible: Must be "st,stm32h7-i2s"
> -  - reg: Offset and length of the device's register set.
> -  - interrupts: Must contain the interrupt line id.
> -  - clocks: Must contain phandle and clock specifier pairs for each entry
> -	in clock-names.
> -  - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k".
> -	"i2sclk": clock which feeds the internal clock generator
> -	"pclk": clock which feeds the peripheral bus interface
> -	"x8k": I2S parent clock for sampling rates multiple of 8kHz.
> -	"x11k": I2S parent clock for sampling rates multiple of 11.025kHz.
> -  - dmas: DMA specifiers for tx and rx dma.
> -    See Documentation/devicetree/bindings/dma/stm32-dma.txt.
> -  - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
> -  - pinctrl-names: should contain only value "default"
> -  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> -
> -Optional properties:
> -  - resets: Reference to a reset controller asserting the reset controller
> -
> -The device node should contain one 'port' child node with one child 'endpoint'
> -node, according to the bindings defined in Documentation/devicetree/bindings/
> -graph.txt.
> -
> -Example:
> -sound_card {
> -	compatible = "audio-graph-card";
> -	dais = <&i2s2_port>;
> -};
> -
> -i2s2: audio-controller@40003800 {
> -	compatible = "st,stm32h7-i2s";
> -	reg = <0x40003800 0x400>;
> -	interrupts = <36>;
> -	clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
> -	clock-names = "pclk", "i2sclk",  "x8k", "x11k";
> -	dmas = <&dmamux2 2 39 0x400 0x1>,
> -           <&dmamux2 3 40 0x400 0x1>;
> -	dma-names = "rx", "tx";
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_i2s2>;
> -
> -	i2s2_port: port@0 {
> -		cpu_endpoint: endpoint {
> -			remote-endpoint = <&codec_endpoint>;
> -			format = "i2s";
> -		};
> -	};
> -};
> -
> -audio-codec {
> -	codec_port: port@0 {
> -		codec_endpoint: endpoint {
> -			remote-endpoint = <&cpu_endpoint>;
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
> new file mode 100644
> index 000000000000..cdfb375c7a14
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/st,stm32-i2s.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 SPI/I2S Controller
> +
> +maintainers:
> +  - Olivier Moysan <olivier.moysan@st.com>
> +
> +description:
> +  The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
> +  Only some SPI instances support I2S.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - st,stm32h7-i2s
> +
> +  "#sound-dai-cells":
> +    const: 0
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: clock feeding the peripheral bus interface.
> +      - description: clock feeding the internal clock generator.
> +      - description: I2S parent clock for sampling rates multiple of 8kHz.
> +      - description: I2S parent clock for sampling rates multiple of 11.025kHz.
> +
> +  clock-names:
> +    items:
> +      - enum: [ pclk, i2sclk, x8k, x11k ]
> +      - enum: [ pclk, i2sclk, x8k, x11k ]
> +      - enum: [ pclk, i2sclk, x8k, x11k ]
> +      - enum: [ pclk, i2sclk, x8k, x11k ]
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/string-array

*-names already has a type, so this is not needed.

> +
> +  interrupts:
> +    maxItems: 1
> +
> +  dmas:
> +    items:
> +      - description: audio capture DMA.
> +      - description: audio playback DMA.
> +
> +  dma-names:
> +    items:
> +      - enum: [ rx, tx ]
> +      - enum: [ rx, tx ]
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/string-array
> +
> +  resets:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - "#sound-dai-cells"
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - dmas
> +  - dma-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/stm32mp1-clks.h>
> +    i2s2: audio-controller@4000b000 {
> +        compatible = "st,stm32h7-i2s";
> +        #sound-dai-cells = <0>;
> +        reg = <0x4000b000 0x400>;
> +        clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
> +        clock-names = "pclk", "i2sclk", "x8k", "x11k";
> +        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> +        dmas = <&dmamux1 39 0x400 0x01>,
> +               <&dmamux1 40 0x400 0x01>;
> +        dma-names = "rx", "tx";
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&i2s2_pins_a>;
> +    };
> +
> +...
> -- 
> 2.17.1
>