devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Samuel Holland <samuel@sholland.org>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Jerome Brunet <jbrunet@baylibre.com>
Cc: alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	Samuel Holland <samuel@sholland.org>
Subject: [PATCH 4/4] ASoC: simple-card: Add support for codec-to-codec dai_links
Date: Thu, 13 Feb 2020 00:11:47 -0600	[thread overview]
Message-ID: <20200213061147.29386-5-samuel@sholland.org> (raw)
In-Reply-To: <20200213061147.29386-1-samuel@sholland.org>

For now we assume there are only a few sets of valid PCM stream
parameters, to avoid needing to specify them in the device tree. We
also assume they are the same in both directions. We calculate the
common subset of parameters, and then the existing code automatically
chooses the highest quality of the remaining values.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 .../devicetree/bindings/sound/simple-card.txt |  1 +
 Documentation/sound/soc/codec-to-codec.rst    |  9 ++++-
 include/sound/simple_card_utils.h             |  1 +
 sound/soc/generic/simple-card-utils.c         | 39 +++++++++++++++++++
 sound/soc/generic/simple-card.c               | 12 ++++++
 5 files changed, 60 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
index 79954cd6e37b..18a62e404a30 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -63,6 +63,7 @@ Optional dai-link subnode properties:
 - mclk-fs             			: Multiplication factor between stream
 					  rate and codec mclk, applied only for
 					  the dai-link.
+- codec-to-codec			: Indicates a codec-to-codec dai-link.
 
 For backward compatibility the frame-master and bitclock-master
 properties can be used as booleans in codec subnode to indicate if the
diff --git a/Documentation/sound/soc/codec-to-codec.rst b/Documentation/sound/soc/codec-to-codec.rst
index 810109d7500d..efe0a8c07933 100644
--- a/Documentation/sound/soc/codec-to-codec.rst
+++ b/Documentation/sound/soc/codec-to-codec.rst
@@ -104,5 +104,10 @@ Make sure to name your corresponding cpu and codec playback and capture
 dai names ending with "Playback" and "Capture" respectively as dapm core
 will link and power those dais based on the name.
 
-Note that in current device tree there is no way to mark a dai_link
-as codec to codec. However, it may change in future.
+A dai_link in a "simple-audio-card" can be marked as codec to codec in
+the device tree by adding the "codec-to-codec" property. The dai_link
+will be initialized with the subset of stream parameters (channels,
+format, sample rate) supported by all DAIs on the link. Since there is
+no way to provide these parameters in the device tree, this is mostly
+useful for communication with simple fixed-function codecs, such as a
+Bluetooth controller or cellular modem.
diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h
index bbdd1542d6f1..80b60237b3cd 100644
--- a/include/sound/simple_card_utils.h
+++ b/include/sound/simple_card_utils.h
@@ -49,6 +49,7 @@ struct asoc_simple_priv {
 		struct asoc_simple_data adata;
 		struct snd_soc_codec_conf *codec_conf;
 		unsigned int mclk_fs;
+		bool codec_to_codec;
 	} *dai_props;
 	struct asoc_simple_jack hp_jack;
 	struct asoc_simple_jack mic_jack;
diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 9b794775df53..2de4cfead790 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -331,6 +331,41 @@ static int asoc_simple_init_dai(struct snd_soc_dai *dai,
 	return 0;
 }
 
+static int asoc_simple_init_dai_link_params(struct snd_soc_pcm_runtime *rtd,
+					    struct simple_dai_props *dai_props)
+{
+	struct snd_soc_dai_link *dai_link = rtd->dai_link;
+	struct snd_soc_pcm_stream *params;
+	struct snd_pcm_hardware hw;
+	int ret;
+
+	if (!dai_props->codec_to_codec)
+		return 0;
+
+	/* Assumes the hardware capabilities are the same in both directions */
+	ret = snd_soc_runtime_calc_hw(rtd, &hw, SNDRV_PCM_STREAM_PLAYBACK);
+	if (ret < 0) {
+		dev_err(rtd->dev, "simple-card: no valid dai_link params\n");
+		return ret;
+	}
+
+	params = devm_kzalloc(rtd->dev, sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	params->formats = hw.formats;
+	params->rates = hw.rates;
+	params->rate_min = hw.rate_min;
+	params->rate_max = hw.rate_max;
+	params->channels_min = hw.channels_min;
+	params->channels_max = hw.channels_max;
+
+	dai_link->params = params;
+	dai_link->num_params = 1;
+
+	return 0;
+}
+
 int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card);
@@ -347,6 +382,10 @@ int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
 	if (ret < 0)
 		return ret;
 
+	ret = asoc_simple_init_dai_link_params(rtd, dai_props);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(asoc_simple_dai_init);
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 55e9f8800b3e..179ab4482d10 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -77,6 +77,16 @@ static int asoc_simple_parse_dai(struct device_node *node,
 	return 0;
 }
 
+static void simple_parse_codec_to_codec(struct device_node *node,
+					struct simple_dai_props *props,
+					char *prefix)
+{
+	char prop[128];
+
+	snprintf(prop, sizeof(prop), "%scodec-to-codec", prefix);
+	props->codec_to_codec = of_property_read_bool(node, prop);
+}
+
 static void simple_parse_convert(struct device *dev,
 				 struct device_node *np,
 				 struct asoc_simple_data *adata)
@@ -217,6 +227,7 @@ static int simple_dai_link_of_dpcm(struct asoc_simple_priv *priv,
 					     "prefix");
 	}
 
+	simple_parse_codec_to_codec(node, dai_props, prefix);
 	simple_parse_convert(dev, np, &dai_props->adata);
 	simple_parse_mclk_fs(top, np, codec, dai_props, prefix);
 
@@ -292,6 +303,7 @@ static int simple_dai_link_of(struct asoc_simple_priv *priv,
 	if (ret < 0)
 		goto dai_link_of_err;
 
+	simple_parse_codec_to_codec(node, dai_props, prefix);
 	simple_parse_mclk_fs(top, cpu, codec, dai_props, prefix);
 
 	ret = asoc_simple_parse_cpu(cpu, dai_link, &single_cpu);
-- 
2.24.1


  parent reply	other threads:[~2020-02-13  6:11 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-13  6:11 [PATCH 0/4] simple-audio-card codec2codec support Samuel Holland
2020-02-13  6:11 ` [PATCH 1/4] ASoC: codec2codec: avoid invalid/double-free of pcm runtime Samuel Holland
2020-02-13  8:37   ` Jerome Brunet
2020-02-13 11:37     ` Mark Brown
2020-02-13 13:37       ` Jerome Brunet
2020-02-13 13:31   ` Applied "ASoC: codec2codec: avoid invalid/double-free of pcm runtime" to the asoc tree Mark Brown
2020-02-13  6:11 ` [PATCH 2/4] ALSA: pcm: Make snd_pcm_limit_hw_rates take hw directly Samuel Holland
2020-02-13  6:30   ` Takashi Iwai
2020-02-15  3:19     ` Samuel Holland
2020-02-13  6:11 ` [PATCH 3/4] ASoC: pcm: Export parameter intersection logic Samuel Holland
2020-02-13  6:11 ` Samuel Holland [this message]
2020-02-13  9:18   ` [PATCH 4/4] ASoC: simple-card: Add support for codec-to-codec dai_links Jerome Brunet
2020-02-13 11:38     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200213061147.29386-5-samuel@sholland.org \
    --to=samuel@sholland.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).