From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Sasha Levin <sashal@kernel.org>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 5.5 247/542] arm64: dts: renesas: r8a77990: ebisu: Remove clkout-lr-synchronous from sound
Date: Fri, 14 Feb 2020 10:43:59 -0500 [thread overview]
Message-ID: <20200214154854.6746-247-sashal@kernel.org> (raw)
In-Reply-To: <20200214154854.6746-1-sashal@kernel.org>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[ Upstream commit bf2b74ce9b33a2edd6ba1930ce60a71830790910 ]
rcar_sound doesn't support clkout-lr-synchronous in upstream.
It was supported under out-of-tree rcar_sound.
upstream rcar_sound is supporting
- clkout-lr-synchronous
+ clkout-lr-asynchronous
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mubt3tux.wl-kuninori.morimoto.gx@renesas.com
Fixes: 56629fcba94c698d ("arm64: dts: renesas: ebisu: Enable Audio")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index b38f9d442fc08..e6d700f8c1948 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -636,7 +636,6 @@
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
- clkout-lr-synchronous;
status = "okay";
--
2.20.1
next prev parent reply other threads:[~2020-02-14 18:08 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200214154854.6746-1-sashal@kernel.org>
2020-02-14 15:40 ` [PATCH AUTOSEL 5.5 057/542] arm64: dts: marvell: clearfog-gt-8k: fix switch cpu port node Sasha Levin
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 072/542] dt-bindings: iio: adc: ad7606: Fix wrong maxItems value Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 170/542] arm64: dts: rockchip: Fix NanoPC-T4 cooling maps Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 172/542] arm64: dts: uDPU: fix broken ethernet Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 183/542] arm64: dts: allwinner: H6: Add PMU mode Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 184/542] arm64: dts: allwinner: H5: Add PMU node Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 185/542] arm: dts: allwinner: H3: " Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 187/542] ARM: dts: at91: Reenable UART TX pull-ups Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 189/542] arm64: dts: qcom: msm8998: Fix tcsr syscon size Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 192/542] arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 198/542] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 199/542] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 246/542] ARM: dts: r8a7779: Add device node for ARM global timer Sasha Levin
2020-02-14 15:43 ` Sasha Levin [this message]
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 251/542] arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 257/542] clk: qcom: Add missing msm8998 gcc_bimc_gfx_clk Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 297/542] arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3 Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 300/542] ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 301/542] ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 306/542] ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 318/542] ARM: dts: at91: sama5d3: fix maximum peripheral clock rates Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 319/542] ARM: dts: at91: sama5d3: define clock rate range for tcb1 Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 329/542] arm64: dts: rockchip: fix dwmmc clock name for px30 Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 330/542] arm64: dts: rockchip: fix dwmmc clock name for rk3308 Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 331/542] arm64: dts: rockchip: add reg property to brcmf sub-nodes Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 332/542] ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 349/542] ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 354/542] MIPS: ralink: dts: gardena_smart_gateway_mt7688: Limit UART1 Sasha Levin
2020-02-14 15:46 ` [PATCH AUTOSEL 5.5 396/542] arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 450/542] ARM: dts: am43xx: add support for clkout1 clock Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200214154854.6746-247-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).