devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Karl Rudbæk Olsen" <karl@micro-technic.com>,
	"Sasha Levin" <sashal@kernel.org>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 5.5 319/542] ARM: dts: at91: sama5d3: define clock rate range for tcb1
Date: Fri, 14 Feb 2020 10:45:11 -0500	[thread overview]
Message-ID: <20200214154854.6746-319-sashal@kernel.org> (raw)
In-Reply-To: <20200214154854.6746-1-sashal@kernel.org>

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit a7e0f3fc01df4b1b7077df777c37feae8c9e8b6d ]

The clock rate range for the TCB1 clock is missing. define it in the device
tree.

Reported-by: Karl Rudbæk Olsen <karl@micro-technic.com>
Fixes: d2e8190b7916 ("ARM: at91/dt: define sama5d3 clocks")
Link: https://lore.kernel.org/r/20200110172007.1253659-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sama5d3_tcb1.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 1584035daf515..215802b8db301 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -22,6 +22,7 @@
 					tcb1_clk: tcb1_clk {
 						#clock-cells = <0>;
 						reg = <27>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 				};
 			};
-- 
2.20.1


  parent reply	other threads:[~2020-02-14 18:03 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214154854.6746-1-sashal@kernel.org>
2020-02-14 15:40 ` [PATCH AUTOSEL 5.5 057/542] arm64: dts: marvell: clearfog-gt-8k: fix switch cpu port node Sasha Levin
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 072/542] dt-bindings: iio: adc: ad7606: Fix wrong maxItems value Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 170/542] arm64: dts: rockchip: Fix NanoPC-T4 cooling maps Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 172/542] arm64: dts: uDPU: fix broken ethernet Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 183/542] arm64: dts: allwinner: H6: Add PMU mode Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 184/542] arm64: dts: allwinner: H5: Add PMU node Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 185/542] arm: dts: allwinner: H3: " Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 187/542] ARM: dts: at91: Reenable UART TX pull-ups Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 189/542] arm64: dts: qcom: msm8998: Fix tcsr syscon size Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 192/542] arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 198/542] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 199/542] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 246/542] ARM: dts: r8a7779: Add device node for ARM global timer Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 247/542] arm64: dts: renesas: r8a77990: ebisu: Remove clkout-lr-synchronous from sound Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 251/542] arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 257/542] clk: qcom: Add missing msm8998 gcc_bimc_gfx_clk Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 297/542] arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3 Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 300/542] ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 301/542] ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 306/542] ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 318/542] ARM: dts: at91: sama5d3: fix maximum peripheral clock rates Sasha Levin
2020-02-14 15:45 ` Sasha Levin [this message]
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 329/542] arm64: dts: rockchip: fix dwmmc clock name for px30 Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 330/542] arm64: dts: rockchip: fix dwmmc clock name for rk3308 Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 331/542] arm64: dts: rockchip: add reg property to brcmf sub-nodes Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 332/542] ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 349/542] ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 354/542] MIPS: ralink: dts: gardena_smart_gateway_mt7688: Limit UART1 Sasha Levin
2020-02-14 15:46 ` [PATCH AUTOSEL 5.5 396/542] arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 450/542] ARM: dts: am43xx: add support for clkout1 clock Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214154854.6746-319-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=karl@micro-technic.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).