From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
gregkh@linuxfoundation.org, jackp@codeaurora.org,
balbi@kernel.org, bjorn.andersson@linaro.org, robh@kernel.org
Cc: linux-kernel@vger.kernel.org, Yu Chen <chenyu56@huawei.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
ShuFan Lee <shufan_lee@richtek.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Hans de Goede <hdegoede@redhat.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Jun Li <lijun.kernel@gmail.com>,
Valentin Schneider <valentin.schneider@arm.com>,
Guillaume Gardet <Guillaume.Gardet@arm.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
devicetree@vger.kernel.org, John Stultz <john.stultz@linaro.org>
Subject: [PATCH v7 06/18] usb: dwc3: Registering a role switch in the DRD code.
Date: Tue, 3 Mar 2020 17:11:47 +0000 [thread overview]
Message-ID: <20200303171159.246992-7-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20200303171159.246992-1-bryan.odonoghue@linaro.org>
From: Yu Chen <chenyu56@huawei.com>
The Type-C drivers use USB role switch API to inform the
system about the negotiated data role, so registering a role
switch in the DRD code in order to support platforms with
USB Type-C connectors.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Guillaume Gardet <Guillaume.Gardet@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
drivers/usb/dwc3/core.h | 3 ++
drivers/usb/dwc3/drd.c | 77 ++++++++++++++++++++++++++++++++++++++++-
2 files changed, 79 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 77c4a9abe365..a99e57636172 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -25,6 +25,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
#include <linux/ulpi/interface.h>
#include <linux/phy/phy.h>
@@ -953,6 +954,7 @@ struct dwc3_scratchpad_array {
* @hsphy_mode: UTMI phy mode, one of following:
* - USBPHY_INTERFACE_MODE_UTMI
* - USBPHY_INTERFACE_MODE_UTMIW
+ * @role_sw: usb_role_switch handle
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
@@ -1086,6 +1088,7 @@ struct dwc3 {
struct extcon_dev *edev;
struct notifier_block edev_nb;
enum usb_phy_interface hsphy_mode;
+ struct usb_role_switch *role_sw;
u32 fladj;
u32 irq_gadget;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index c946d64142ad..331c6e997f0c 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -476,6 +476,73 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
return edev;
}
+#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
+#define ROLE_SWITCH 1
+static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ u32 mode;
+
+ switch (role) {
+ case USB_ROLE_HOST:
+ mode = DWC3_GCTL_PRTCAP_HOST;
+ break;
+ case USB_ROLE_DEVICE:
+ mode = DWC3_GCTL_PRTCAP_DEVICE;
+ break;
+ default:
+ mode = DWC3_GCTL_PRTCAP_DEVICE;
+ break;
+ }
+
+ dwc3_set_mode(dwc, mode);
+ return 0;
+}
+
+static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ unsigned long flags;
+ enum usb_role role;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ switch (dwc->current_dr_role) {
+ case DWC3_GCTL_PRTCAP_HOST:
+ role = USB_ROLE_HOST;
+ break;
+ case DWC3_GCTL_PRTCAP_DEVICE:
+ role = USB_ROLE_DEVICE;
+ break;
+ case DWC3_GCTL_PRTCAP_OTG:
+ role = dwc->current_otg_role;
+ break;
+ default:
+ role = USB_ROLE_DEVICE;
+ break;
+ }
+ spin_unlock_irqrestore(&dwc->lock, flags);
+ return role;
+}
+
+static int dwc3_setup_role_switch(struct dwc3 *dwc)
+{
+ struct usb_role_switch_desc dwc3_role_switch = {NULL};
+
+ dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+ dwc3_role_switch.set = dwc3_usb_role_switch_set;
+ dwc3_role_switch.get = dwc3_usb_role_switch_get;
+ dwc->role_sw = usb_role_switch_register(dwc->dev, &dwc3_role_switch);
+ if (IS_ERR(dwc->role_sw))
+ return PTR_ERR(dwc->role_sw);
+
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+ return 0;
+}
+#else
+#define ROLE_SWITCH 0
+#define dwc3_setup_role_switch(x) 0
+#endif
+
int dwc3_drd_init(struct dwc3 *dwc)
{
int ret, irq;
@@ -484,7 +551,12 @@ int dwc3_drd_init(struct dwc3 *dwc)
if (IS_ERR(dwc->edev))
return PTR_ERR(dwc->edev);
- if (dwc->edev) {
+ if (ROLE_SWITCH &&
+ device_property_read_bool(dwc->dev, "usb-role-switch")) {
+ ret = dwc3_setup_role_switch(dwc);
+ if (ret < 0)
+ return ret;
+ } else if (dwc->edev) {
dwc->edev_nb.notifier_call = dwc3_drd_notifier;
ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
&dwc->edev_nb);
@@ -531,6 +603,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
{
unsigned long flags;
+ if (dwc->role_sw)
+ usb_role_switch_unregister(dwc->role_sw);
+
if (dwc->edev)
extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
&dwc->edev_nb);
--
2.25.1
next prev parent reply other threads:[~2020-03-03 17:13 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200303171159.246992-1-bryan.odonoghue@linaro.org>
2020-03-03 17:11 ` [PATCH v7 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding Bryan O'Donoghue
2020-03-03 17:11 ` [PATCH v7 04/18] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings Bryan O'Donoghue
2020-03-04 16:17 ` Rob Herring
2020-03-03 17:11 ` Bryan O'Donoghue [this message]
2020-03-07 7:20 ` [PATCH v7 06/18] usb: dwc3: Registering a role switch in the DRD code Bjorn Andersson
2020-03-03 17:11 ` [PATCH v7 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example Bryan O'Donoghue
2020-03-04 14:57 ` Rob Herring
2020-03-04 16:24 ` Bryan O'Donoghue
2020-03-03 17:11 ` [PATCH v7 10/18] usb: dwc3: Add support for usb-conn-gpio connectors Bryan O'Donoghue
2020-03-03 17:11 ` [PATCH v7 13/18] arm64: dts: qcom: qcs404: Add USB devices and PHYs Bryan O'Donoghue
2020-03-03 17:11 ` [PATCH v7 14/18] arm64: dts: qcom: qcs404-evb: Define VBUS pins Bryan O'Donoghue
2020-03-03 17:11 ` [PATCH v7 15/18] arm64: dts: qcom: qcs404-evb: Define USB ID pin Bryan O'Donoghue
2020-03-03 17:11 ` [PATCH v7 16/18] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator Bryan O'Donoghue
2020-03-03 17:11 ` [PATCH v7 17/18] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage Bryan O'Donoghue
2020-03-03 17:11 ` [PATCH v7 18/18] arm64: dts: qcom: qcs404-evb: Enable USB controllers Bryan O'Donoghue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200303171159.246992-7-bryan.odonoghue@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=Guillaume.Gardet@arm.com \
--cc=andy.shevchenko@gmail.com \
--cc=balbi@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=chenyu56@huawei.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=jackp@codeaurora.org \
--cc=john.stultz@linaro.org \
--cc=lijun.kernel@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=shufan_lee@richtek.com \
--cc=suzuki.poulose@arm.com \
--cc=valentin.schneider@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).