Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: <Ajay.Kathat@microchip.com>
To: <linux-wireless@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <devicetree@vger.kernel.org>,
	<gregkh@linuxfoundation.org>, <johannes@sipsolutions.net>,
	<Adham.Abozaeid@microchip.com>, <Nicolas.Ferre@microchip.com>,
	<Claudiu.Beznea@microchip.com>, <Venkateswara.Kaja@microchip.com>,
	<Ajay.Kathat@microchip.com>
Subject: [PATCH v6 15/17] wilc1000: add fw.h
Date: Fri, 27 Mar 2020 06:33:19 +0000
Message-ID: <20200327063302.20511-16-ajay.kathat@microchip.com> (raw)
In-Reply-To: <20200327063302.20511-1-ajay.kathat@microchip.com>

From: Ajay Singh <ajay.kathat@microchip.com>

Moved 'drivers/staging/wilc1000/fw.h' to
'drivers/net/wireless/microchip/wilc1000/fw.h'.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
 drivers/net/wireless/microchip/wilc1000/fw.h | 119 +++++++++++++++++++
 1 file changed, 119 insertions(+)
 create mode 100644 drivers/net/wireless/microchip/wilc1000/fw.h

diff --git a/drivers/net/wireless/microchip/wilc1000/fw.h b/drivers/net/wireless/microchip/wilc1000/fw.h
new file mode 100644
index 000000000000..a76e1dea4345
--- /dev/null
+++ b/drivers/net/wireless/microchip/wilc1000/fw.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
+ * All rights reserved.
+ */
+
+#ifndef WILC_FW_H
+#define WILC_FW_H
+
+#include <linux/ieee80211.h>
+
+#define WILC_MAX_NUM_STA			9
+#define WILC_MAX_RATES_SUPPORTED		12
+#define WILC_MAX_NUM_PMKIDS			16
+#define WILC_MAX_NUM_SCANNED_CH			14
+
+struct wilc_assoc_resp {
+	__le16 capab_info;
+	__le16 status_code;
+	__le16 aid;
+} __packed;
+
+struct wilc_pmkid {
+	u8 bssid[ETH_ALEN];
+	u8 pmkid[WLAN_PMKID_LEN];
+} __packed;
+
+struct wilc_pmkid_attr {
+	u8 numpmkid;
+	struct wilc_pmkid pmkidlist[WILC_MAX_NUM_PMKIDS];
+} __packed;
+
+struct wilc_reg_frame {
+	u8 reg;
+	u8 reg_id;
+	__le16 frame_type;
+} __packed;
+
+struct wilc_drv_handler {
+	__le32 handler;
+	u8 mode;
+} __packed;
+
+struct wilc_wep_key {
+	u8 index;
+	u8 key_len;
+	u8 key[0];
+} __packed;
+
+struct wilc_sta_wpa_ptk {
+	u8 mac_addr[ETH_ALEN];
+	u8 key_len;
+	u8 key[0];
+} __packed;
+
+struct wilc_ap_wpa_ptk {
+	u8 mac_addr[ETH_ALEN];
+	u8 index;
+	u8 key_len;
+	u8 key[0];
+} __packed;
+
+struct wilc_gtk_key {
+	u8 mac_addr[ETH_ALEN];
+	u8 rsc[8];
+	u8 index;
+	u8 key_len;
+	u8 key[0];
+} __packed;
+
+struct wilc_op_mode {
+	__le32 mode;
+} __packed;
+
+struct wilc_noa_opp_enable {
+	u8 ct_window;
+	u8 cnt;
+	__le32 duration;
+	__le32 interval;
+	__le32 start_time;
+} __packed;
+
+struct wilc_noa_opp_disable {
+	u8 cnt;
+	__le32 duration;
+	__le32 interval;
+	__le32 start_time;
+} __packed;
+
+struct wilc_join_bss_param {
+	char ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ssid_terminator;
+	u8 bss_type;
+	u8 ch;
+	__le16 cap_info;
+	u8 sa[ETH_ALEN];
+	u8 bssid[ETH_ALEN];
+	__le16 beacon_period;
+	u8 dtim_period;
+	u8 supp_rates[WILC_MAX_RATES_SUPPORTED + 1];
+	u8 wmm_cap;
+	u8 uapsd_cap;
+	u8 ht_capable;
+	u8 rsn_found;
+	u8 rsn_grp_policy;
+	u8 mode_802_11i;
+	u8 p_suites[3];
+	u8 akm_suites[3];
+	u8 rsn_cap[2];
+	u8 noa_enabled;
+	__le32 tsf_lo;
+	u8 idx;
+	u8 opp_enabled;
+	union {
+		struct wilc_noa_opp_disable opp_dis;
+		struct wilc_noa_opp_enable opp_en;
+	};
+} __packed;
+#endif
-- 
2.24.0

  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-27  6:33 [PATCH v6 00/17] wilc1000: move out of staging Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 01/17] wilc1000: add hif.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 02/17] wilc1000: add hif.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 03/17] wilc1000: add wlan_if.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 04/17] wilc1000: add wlan_cfg.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 05/17] wilc1000: add wlan_cfg.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 06/17] wilc1000: add cfg80211.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 07/17] wilc1000: add cfg80211.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 08/17] wilc1000: add netdev.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 09/17] wilc1000: add netdev.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 10/17] wilc1000: add mon.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 11/17] wilc1000: add spi.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 12/17] wilc1000: add wlan.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 14/17] wilc1000: add sdio.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 13/17] wilc1000: add wlan.c Ajay.Kathat
2020-03-27  6:33 ` Ajay.Kathat [this message]
2020-03-27  6:33 ` [PATCH v6 16/17] dt: bindings: net: add microchip,wilc1000.yaml Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 17/17] wilc1000: add Makefile and Kconfig files for wilc1000 compilation Ajay.Kathat
2020-03-27 11:16 ` [PATCH v6 00/17] wilc1000: move out of staging Kalle Valo
2020-03-27 11:25   ` Greg KH
2020-03-27 12:07   ` Ajay.Kathat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200327063302.20511-16-ajay.kathat@microchip.com \
    --to=ajay.kathat@microchip.com \
    --cc=Adham.Abozaeid@microchip.com \
    --cc=Claudiu.Beznea@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=Venkateswara.Kaja@microchip.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git