From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id E09DEC433DF for ; Sun, 24 May 2020 02:02:30 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A6D1920738 for ; Sun, 24 May 2020 02:02:30 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="gkly61Ah" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2387589AbgEXCCa (ORCPT ); Sat, 23 May 2020 22:02:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45706 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2387573AbgEXCC3 (ORCPT ); Sat, 23 May 2020 22:02:29 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A8B84C061A0E; Sat, 23 May 2020 19:02:29 -0700 (PDT) Received: from pendragon.ideasonboard.com (81-175-216-236.bb.dnainternet.fi [81.175.216.236]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 0C16424D; Sun, 24 May 2020 04:02:26 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1590285747; bh=0up19u9tm13zJLOJzGxB1I6aEaPqgsHa2bsPf5YdchI=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=gkly61Ahte2sMLQ7Tyo53rsjaQdh2yJ3Q0vVZUfKO4Tf8pWOOT8I8wTYW4IGmB56W I19Pt6HfiTYH1sUZOYyJT30AfmREK1UrUPLurwXzc4svhizcUaKyfNQmfC0arzrbdz WjeEulboEhITTro7EpwyVe2QaQqdFK+5qTlPSc1M= Date: Sun, 24 May 2020 05:02:14 +0300 From: Laurent Pinchart To: Vishal Sagar Cc: Hyun Kwon , mchehab@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, Michal Simek , linux-media@vger.kernel.org, devicetree@vger.kernel.org, hans.verkuil@cisco.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Dinesh Kumar , Sandip Kothari , Luca Ceresoli , Jacopo Mondi , Hyun Kwon , Rob Herring Subject: Re: [PATCH v13 1/2] media: dt-bindings: media: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem Message-ID: <20200524020214.GB6026@pendragon.ideasonboard.com> References: <20200512151947.120348-1-vishal.sagar@xilinx.com> <20200512151947.120348-2-vishal.sagar@xilinx.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <20200512151947.120348-2-vishal.sagar@xilinx.com> Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Hi Vishal, Thank you for the patch. On Tue, May 12, 2020 at 08:49:46PM +0530, Vishal Sagar wrote: > Add bindings documentation for Xilinx MIPI CSI-2 Rx Subsystem. > > The Xilinx MIPI CSI-2 Rx Subsystem consists of a CSI-2 Rx controller, a > D-PHY in Rx mode and a Video Format Bridge. > > Signed-off-by: Vishal Sagar > Reviewed-by: Hyun Kwon > Reviewed-by: Rob Herring > Reviewed-by: Luca Ceresoli > Reviewed-by: Laurent Pinchart > --- > v13 > - Based on Laurent's suggestions > - Fixed the datatypes values as minimum and maximum > - condition added for en-vcx property > > v12 > - Moved to yaml format > - Update CSI-2 and D-PHY > - Mention that bindings for D-PHY not here > - reset -> video-reset > > v11 > - Modify compatible string from 4.0 to 5.0 > > v10 > - No changes > > v9 > - Fix xlnx,vfb description. > - s/Optional/Required endpoint property. > - Move data-lanes description from Ports to endpoint property section. > > v8 > - Added reset-gpios optional property to assert video_aresetn > > v7 > - Removed the control name from dt bindings > - Updated the example dt node name to csi2rx > > v6 > - Added "control" after V4L2_CID_XILINX_MIPICSISS_ACT_LANES as suggested by Luca > - Added reviewed by Rob Herring > > v5 > - Incorporated comments by Luca Cersoli > - Removed DPHY clock from description and example > - Removed bayer pattern from device tree MIPI CSI IP > doesn't deal with bayer pattern. > > v4 > - Added reviewed by Hyun Kwon > > v3 > - removed interrupt parent as suggested by Rob > - removed dphy clock > - moved vfb to optional properties > - Added required and optional port properties section > - Added endpoint property section > > v2 > - updated the compatible string to latest version supported > - removed DPHY related parameters > - added CSI v2.0 related property (including VCX for supporting upto 16 > virtual channels). > - modified csi-pxl-format from string to unsigned int type where the value > is as per the CSI specification > - Defined port 0 and port 1 as sink and source ports. > - Removed max-lanes property as suggested by Rob and Sakari > .../bindings/media/xilinx/xlnx,csi2rxss.yaml | 226 ++++++++++++++++++ > 1 file changed, 226 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml > > diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml > new file mode 100644 > index 000000000000..b0885f461785 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml > @@ -0,0 +1,226 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/xilinx/xlnx,csi2rxss.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Xilinx MIPI CSI-2 Receiver Subsystem > + > +maintainers: > + - Vishal Sagar > + > +description: | > + The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2 > + traffic from compliant camera sensors and send the output as AXI4 Stream > + video data for image processing. > + The subsystem consists of a MIPI D-PHY in slave mode which captures the > + data packets. This is passed along the MIPI CSI-2 Rx IP which extracts the > + packet data. The optional Video Format Bridge (VFB) converts this data to > + AXI4 Stream video data. > + For more details, please refer to PG232 Xilinx MIPI CSI-2 Receiver Subsystem. > + Please note that this bindings includes only the MIPI CSI-2 Rx controller > + and Video Format Bridge and not D-PHY. > + > +properties: > + compatible: > + items: > + - enum: > + - xlnx,mipi-csi2-rx-subsystem-5.0 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + description: List of clock specifiers > + items: > + - description: AXI Lite clock > + - description: Video clock > + > + clock-names: > + items: > + - const: lite_aclk > + - const: video_aclk > + > + xlnx,csi-pxl-format: > + description: | > + This denotes the CSI Data type selected in hw design. > + Packets other than this data type (except for RAW8 and > + User defined data types) will be filtered out. > + Possible values are as below - > + 0x1e - YUV4228B > + 0x1f - YUV42210B > + 0x20 - RGB444 > + 0x21 - RGB555 > + 0x22 - RGB565 > + 0x23 - RGB666 > + 0x24 - RGB888 > + 0x28 - RAW6 > + 0x29 - RAW7 > + 0x2a - RAW8 > + 0x2b - RAW10 > + 0x2c - RAW12 > + 0x2d - RAW14 > + 0x2e - RAW16 > + 0x2f - RAW20 > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + - anyOf: > + - minimum: 0x1e > + - maximum: 0x24 > + - minimum: 0x28 > + - maximum: 0x2f > + > + xlnx,vfb: > + type: boolean > + description: Present when Video Format Bridge is enabled in IP configuration > + > + xlnx,en-csi-v2-0: > + type: boolean > + description: Present if CSI v2 is enabled in IP configuration. > + > + xlnx,en-vcx: > + type: boolean > + description: | > + When present, there are maximum 16 virtual channels, else only 4. > + > + xlnx,en-active-lanes: > + type: boolean > + description: | > + Present if the number of active lanes can be re-configured at > + runtime in the Protocol Configuration Register. Otherwise all lanes, > + as set in IP configuration, are always active. > + > + video-reset-gpios: > + description: Optional specifier for a GPIO that asserts video_aresetn. > + maxItems: 1 > + > + ports: > + type: object > + > + properties: > + port@0: > + type: object > + description: | > + Input / sink port node, single endpoint describing the > + CSI-2 transmitter. > + > + properties: > + reg: > + const: 0 > + > + endpoint: > + type: object > + > + properties: > + > + data-lanes: > + description: | > + This is required only in the sink port 0 endpoint which > + connects to MIPI CSI-2 source like sensor. > + The possible values are - > + 1 - For 1 lane enabled in IP. > + 1 2 - For 2 lanes enabled in IP. > + 1 2 3 - For 3 lanes enabled in IP. > + 1 2 3 4 - For 4 lanes enabled in IP. > + items: > + - const: 1 > + - const: 2 > + - const: 3 > + - const: 4 > + > + remote-endpoint: true > + > + required: > + - data-lanes > + - remote-endpoint > + > + additionalProperties: false > + > + additionalProperties: false > + > + port@1: > + type: object > + description: | > + Output / source port node, endpoint describing modules > + connected the CSI-2 receiver. > + > + properties: > + > + reg: > + const: 1 > + > + endpoint: > + type: object > + > + properties: > + > + remote-endpoint: true > + > + required: > + - remote-endpoint > + > + additionalProperties: false > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - clock-names > + - xlnx,csi-pxl-format > + - ports > + > +if: > + not: > + required: > + - xlnx,en-csi-v2-0 > +then: > + properties: > + xlnx,en-vcx: false As I've just commented on v12, I think we should condition the xlnx,csi-pxl-format property to xlnx,vfb being set. xlnx,csi-pxl-format should be removed from the required properties above, and the following conditions added: allOf: - if: required: - xlnx,vfb then: required: - xlnx,csi-pxl-format else: properties: xlnx,csi-pxl-format: false - if: not: required: - xlnx,en-csi-v2-0 then: properties: xlnx,en-vcx: false The 'allOf' is needed as you can't have two 'if' constructs at the top level. Please however let me know if my understanding is wrong and xlnx,csi-pxl-format is needed even when xlnx,vfb is not set. In that case please ignore this change (but please add the ... below). > + > +additionalProperties: false > + > +examples: > + - | > + #include > + xcsi2rxss_1: csi2rx@a0020000 { > + compatible = "xlnx,mipi-csi2-rx-subsystem-5.0"; > + reg = <0x0 0xa0020000 0x0 0x10000>; > + interrupt-parent = <&gic>; > + interrupts = <0 95 4>; > + xlnx,csi-pxl-format = <0x2a>; > + xlnx,vfb; > + xlnx,en-active-lanes; > + xlnx,en-csi-v2-0; > + xlnx,en-vcx; > + clock-names = "lite_aclk", "video_aclk"; > + clocks = <&misc_clk_0>, <&misc_clk_1>; > + video-reset-gpios = <&gpio 86 GPIO_ACTIVE_LOW>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + /* Sink port */ > + reg = <0>; > + csiss_in: endpoint { > + data-lanes = <1 2 3 4>; > + /* MIPI CSI-2 Camera handle */ > + remote-endpoint = <&camera_out>; > + }; > + }; > + port@1 { > + /* Source port */ > + reg = <1>; > + csiss_out: endpoint { > + remote-endpoint = <&vproc_in>; > + }; > + }; > + }; > + }; YAML files usually end with ... on the last line to mark the end of file. Reviewed-by: Laurent Pinchart -- Regards, Laurent Pinchart