Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Mark Brown <broonie@kernel.org>,
	Serge Semin <fancer.lancer@gmail.com>,
	Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>,
	Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>,
	Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
	Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru>,
	Vadim Vlasov <V.Vlasov@baikalelectronics.ru>,
	Alexey Kolotnikov <Alexey.Kolotnikov@baikalelectronics.ru>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Arnd Bergmann <arnd@arndb.de>, Feng Tang <feng.tang@intel.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-mips@vger.kernel.org, linux-spi@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
Date: Fri, 29 May 2020 16:27:51 +0300
Message-ID: <20200529132751.GR1634618@smile.fi.intel.com> (raw)
In-Reply-To: <20200529131205.31838-1-Sergey.Semin@baikalelectronics.ru>

On Fri, May 29, 2020 at 04:11:49PM +0300, Serge Semin wrote:
> Baikal-T1 SoC provides a DW DMA controller to perform low-speed peripherals
> Mem-to-Dev and Dev-to-Mem transaction. This is also applicable to the DW
> APB SSI devices embedded into the SoC. Currently the DMA-based transfers
> are supported by the DW APB SPI driver only as a middle layer code for
> Intel MID/Elkhart PCI devices. Seeing the same code can be used for normal
> platform DMAC device we introduced a set of patches to fix it within this
> series.
> 
> First of all we need to add the Tx and Rx DMA channels support into the DW
> APB SSI binding. Then there are several fixes and cleanups provided as a
> initial preparation for the Generic DMA support integration: add Tx/Rx
> finish wait methods, clear DMAC register when done or stopped, Fix native
> CS being unset, enable interrupts in accordance with DMA xfer mode,
> discard static DW DMA slave structures, discard unused void priv pointer
> and dma_width member of the dw_spi structure, provide the DMA Tx/Rx burst
> length parametrisation and make sure it's optionally set in accordance
> with the DMA max-burst capability.
> 
> In order to have the DW APB SSI MMIO driver working with DMA we need to
> initialize the paddr field with the physical base address of the DW APB SSI
> registers space. Then we unpin the Intel MID specific code from the
> generic DMA one and placed it into the spi-dw-pci.c driver, which is a
> better place for it anyway. After that the naming cleanups are performed
> since the code is going to be used for a generic DMAC device. Finally the
> Generic DMA initialization can be added to the generic version of the
> DW APB SSI IP.
> 
> Last but not least we traditionally convert the legacy plain text-based
> dt-binding file with yaml-based one and as a cherry on a cake replace
> the manually written DebugFS registers read method with a ready-to-use
> for the same purpose regset32 DebugFS interface usage.
> 
> This patchset is rebased and tested on the spi/for-next (5.7-rc5):
> base-commit: fe9fce6b2cf3 ("Merge remote-tracking branch 'spi/for-5.8' into spi-next")

Mark, I leave few first patches for you to decide if it's right thing to do.
So, if you are okay, I'm not against them, thanks!

> Link: https://lore.kernel.org/linux-spi/20200508132943.9826-1-Sergey.Semin@baikalelectronics.ru/
> Changelog v2:
> - Rebase on top of the spi repository for-next branch.
> - Move bindings conversion patch to the tail of the series.
> - Move fixes to the head of the series.
> - Apply as many changes as possible to be applied the Generic DMA
>   functionality support is added and the spi-dw-mid is moved to the
>   spi-dw-dma driver.
> - Discard patch "spi: dw: Fix dma_slave_config used partly uninitialized"
>   since the problem has already been fixed.
> - Add new patch "spi: dw: Discard unused void priv pointer".
> - Add new patch "spi: dw: Discard dma_width member of the dw_spi structure".
>   n_bytes member of the DW SPI data can be used instead.
> - Build the DMA functionality into the DW APB SSI core if required instead
>   of creating a separate kernel module.
> - Use conditional statement instead of the ternary operator in the ref
>   clock getter.
> 
> Link: https://lore.kernel.org/linux-spi/20200515104758.6934-1-Sergey.Semin@baikalelectronics.ru/
> Changelog v3:
> - Use spi_delay_exec() method to wait for the DMA operation completion.
> - Explicitly initialize the dw_dma_slave members on stack.
> - Discard the dws->fifo_len utilization in the Tx FIFO DMA threshold
>   setting from the patch where we just add the default burst length
>   constants.
> - Use min() method to calculate the optimal burst values.
> - Add new patch which moves the spi-dw.c source file to spi-dw-core.c in
>   order to preserve the DW APB SSI core driver name.
> - Add commas in the debugfs_reg32 structure initializer and after the last
>   entry of the dw_spi_dbgfs_regs array.
> 
> Link: https://lore.kernel.org/linux-spi/20200521012206.14472-1-Sergey.Semin@baikalelectronics.ru
> Changelog v4:
> - Get back ndelay() method to wait for an SPI transfer completion.
>   spi_delay_exec() isn't suitable for the atomic context.
> 
> Link: https://lore.kernel.org/linux-spi/20200522000806.7381-1-Sergey.Semin@baikalelectronics.ru
> Changelog v5:
> - Refactor the Tx/Rx DMA-based SPI transfers wait methods.
> - Add a new patch "spi: dw: Set xfer effective_speed_hz".
> - Add a new patch "spi: dw: Return any value retrieved from the
>   dma_transfer callback" as a preparation patch before implementing
>   the local DMA, Tx SPI and Rx SPI transfers wait methods.
> - Add a new patch "spi: dw: Locally wait for the DMA transactions
>   completion", which provides a local DMA transaction complete
>   method
> - Create a dedicated patch which adds the Rx-done wait method:
>   "spi: dw: Add SPI Rx-done wait method to DMA-based transfer".
> - Add more detailed description of the problems the Tx/Rx-wait
>   methods-related patches fix.
> - Wait for the SPI Tx and Rx transfers being finished in the
>   mid_spi_dma_transfer() method executed in the task context.
> - Use spi_delay_exec() to wait for the SPI Tx/Rx completion, since now
>   the driver calls the wait methods in the kernel thread context.
> - Use SPI_DELAY_UNIT_SCK spi_delay unit for Tx-wait delay, since SPI
>   xfer's are now have the effective_speed_hz initialized.
> - Rx-wait for a delay correlated with the APB/SSI synchronous clock
>   rate instead of using the SPI bus clock rate.
> 
> Link: https://lore.kernel.org/linux-spi/20200529035915.20790-1-Sergey.Semin@baikalelectronics.ru
> Changelog v6:
> - Provide a more detailed description of the patch:
>   2901db35bea1 ("spi: dw: Locally wait for the DMA transfers completion")
> - Calculate the Rx delay with better accuracy by moving 4-multiplication
>   to the head of the formulae:
>   ns = 4U * NSEC_PER_SEC / dws->max_freq * nents.
> 
> Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>
> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
> Cc: Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru>
> Cc: Vadim Vlasov <V.Vlasov@baikalelectronics.ru>
> Cc: Alexey Kolotnikov <Alexey.Kolotnikov@baikalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Feng Tang <feng.tang@intel.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: linux-mips@vger.kernel.org
> Cc: linux-spi@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> 
> Serge Semin (16):
>   spi: dw: Set xfer effective_speed_hz
>   spi: dw: Return any value retrieved from the dma_transfer callback
>   spi: dw: Locally wait for the DMA transfers completion
>   spi: dw: Add SPI Tx-done wait method to DMA-based transfer
>   spi: dw: Add SPI Rx-done wait method to DMA-based transfer
>   spi: dw: Parameterize the DMA Rx/Tx burst length
>   spi: dw: Use DMA max burst to set the request thresholds
>   spi: dw: Fix Rx-only DMA transfers
>   spi: dw: Add core suffix to the DW APB SSI core source file
>   spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
>   spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
>   spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
>   spi: dw: Cleanup generic DW DMA code namings
>   spi: dw: Add DMA support to the DW SPI MMIO driver
>   spi: dw: Use regset32 DebugFS method to create regdump file
>   dt-bindings: spi: Convert DW SPI binding to DT schema
> 
>  .../bindings/spi/snps,dw-apb-ssi.txt          |  44 --
>  .../bindings/spi/snps,dw-apb-ssi.yaml         | 127 +++++
>  .../devicetree/bindings/spi/spi-dw.txt        |  24 -
>  drivers/spi/Kconfig                           |  15 +-
>  drivers/spi/Makefile                          |   5 +-
>  drivers/spi/{spi-dw.c => spi-dw-core.c}       |  95 ++--
>  drivers/spi/spi-dw-dma.c                      | 482 ++++++++++++++++++
>  drivers/spi/spi-dw-mid.c                      | 382 --------------
>  drivers/spi/spi-dw-mmio.c                     |   4 +
>  drivers/spi/spi-dw-pci.c                      |  50 +-
>  drivers/spi/spi-dw.h                          |  20 +-
>  11 files changed, 719 insertions(+), 529 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
>  create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
>  delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt
>  rename drivers/spi/{spi-dw.c => spi-dw-core.c} (82%)
>  create mode 100644 drivers/spi/spi-dw-dma.c
>  delete mode 100644 drivers/spi/spi-dw-mid.c
> 
> -- 
> 2.26.2
> 

-- 
With Best Regards,
Andy Shevchenko



  parent reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-29 13:11 Serge Semin
2020-05-29 13:11 ` [PATCH v6 01/16] spi: dw: Set xfer effective_speed_hz Serge Semin
2020-05-29 13:11 ` [PATCH v6 02/16] spi: dw: Return any value retrieved from the dma_transfer callback Serge Semin
2020-05-29 13:11 ` [PATCH v6 03/16] spi: dw: Locally wait for the DMA transfers completion Serge Semin
2020-05-29 13:11 ` [PATCH v6 04/16] spi: dw: Add SPI Tx-done wait method to DMA-based transfer Serge Semin
2020-05-29 13:11 ` [PATCH v6 05/16] spi: dw: Add SPI Rx-done " Serge Semin
2020-05-29 13:11 ` [PATCH v6 06/16] spi: dw: Parameterize the DMA Rx/Tx burst length Serge Semin
2020-05-29 13:11 ` [PATCH v6 07/16] spi: dw: Use DMA max burst to set the request thresholds Serge Semin
2020-05-29 13:11 ` [PATCH v6 08/16] spi: dw: Fix Rx-only DMA transfers Serge Semin
2020-05-29 13:11 ` [PATCH v6 09/16] spi: dw: Add core suffix to the DW APB SSI core source file Serge Semin
2020-05-29 13:11 ` [PATCH v6 10/16] spi: dw: Move Non-DMA code to the DW PCIe-SPI driver Serge Semin
2020-05-29 13:12 ` [PATCH v6 11/16] spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI Serge Semin
2020-05-29 13:12 ` [PATCH v6 12/16] spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core Serge Semin
2020-05-29 13:12 ` [PATCH v6 13/16] spi: dw: Cleanup generic DW DMA code namings Serge Semin
2020-05-29 13:12 ` [PATCH v6 14/16] spi: dw: Add DMA support to the DW SPI MMIO driver Serge Semin
2020-05-29 13:12 ` [PATCH v6 15/16] spi: dw: Use regset32 DebugFS method to create regdump file Serge Semin
2020-05-29 13:12 ` [PATCH v6 16/16] dt-bindings: spi: Convert DW SPI binding to DT schema Serge Semin
2020-05-29 13:27 ` Andy Shevchenko [this message]
2020-05-29 17:18 ` [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support Mark Brown
2020-05-29 17:26   ` Serge Semin
2020-05-29 17:33     ` Mark Brown
2020-05-29 17:35       ` Serge Semin
2020-05-29 21:22       ` Rob Herring
2020-05-29 22:21         ` Mark Brown
2020-05-29 17:43     ` Andy Shevchenko
2020-05-29 17:47       ` Serge Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200529132751.GR1634618@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=Alexey.Kolotnikov@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Ekaterina.Skachko@baikalelectronics.ru \
    --cc=Georgy.Vlasov@baikalelectronics.ru \
    --cc=Maxim.Kaurkin@baikalelectronics.ru \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=Ramil.Zaripov@baikalelectronics.ru \
    --cc=Sergey.Semin@baikalelectronics.ru \
    --cc=V.Vlasov@baikalelectronics.ru \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=feng.tang@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git