* [PATCH 1/2] arm64: dts: meson: odroid-n2: enable audio loopback
2020-07-01 9:45 [PATCH 0/2] arm64: dts: meson: odroid-n2: update sound card Jerome Brunet
@ 2020-07-01 9:45 ` Jerome Brunet
2020-07-01 9:45 ` [PATCH 2/2] arm64: dts: meson: odroid-n2: add jack audio output support Jerome Brunet
2020-08-10 22:17 ` [PATCH 0/2] arm64: dts: meson: odroid-n2: update sound card Kevin Hilman
2 siblings, 0 replies; 4+ messages in thread
From: Jerome Brunet @ 2020-07-01 9:45 UTC (permalink / raw)
To: Kevin Hilman; +Cc: Jerome Brunet, linux-amlogic, devicetree, linux-kernel
Add capture pcm interfaces and loopback routes to the odroid-n2
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 65 +++++++++++++++++--
1 file changed, 61 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 169ea283d4ee..d4421ad164bd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -209,11 +209,28 @@ hdmi_connector_in: endpoint {
sound {
compatible = "amlogic,axg-sound-card";
model = "G12B-ODROID-N2";
- audio-aux-devs = <&tdmout_b>;
+ audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>,
+ <&tdmin_c>, <&tdmin_lb>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "TDMIN_A IN 4", "TDM_B Loopback",
+ "TDMIN_B IN 4", "TDM_B Loopback",
+ "TDMIN_C IN 4", "TDM_B Loopback",
+ "TDMIN_LB IN 1", "TDM_B Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "TODDR_A IN 2", "TDMIN_C OUT",
+ "TODDR_B IN 2", "TDMIN_C OUT",
+ "TODDR_C IN 2", "TDMIN_C OUT",
+ "TODDR_A IN 6", "TDMIN_LB OUT",
+ "TODDR_B IN 6", "TDMIN_LB OUT",
+ "TODDR_C IN 6", "TDMIN_LB OUT";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
@@ -236,8 +253,20 @@ dai-link-2 {
sound-dai = <&frddr_c>;
};
- /* 8ch hdmi interface */
dai-link-3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link-5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-6 {
sound-dai = <&tdmif_b>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
@@ -252,7 +281,7 @@ codec {
};
/* hdmi glue */
- dai-link-4 {
+ dai-link-7 {
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
codec {
@@ -476,6 +505,22 @@ &tdmif_b {
status = "okay";
};
+&tdmin_a {
+ status = "okay";
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&tdmin_c {
+ status = "okay";
+};
+
+&tdmin_lb {
+ status = "okay";
+};
+
&tdmout_b {
status = "okay";
};
@@ -484,6 +529,18 @@ &tohdmitx {
status = "okay";
};
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
--
2.25.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] arm64: dts: meson: odroid-n2: add jack audio output support
2020-07-01 9:45 [PATCH 0/2] arm64: dts: meson: odroid-n2: update sound card Jerome Brunet
2020-07-01 9:45 ` [PATCH 1/2] arm64: dts: meson: odroid-n2: enable audio loopback Jerome Brunet
@ 2020-07-01 9:45 ` Jerome Brunet
2020-08-10 22:17 ` [PATCH 0/2] arm64: dts: meson: odroid-n2: update sound card Kevin Hilman
2 siblings, 0 replies; 4+ messages in thread
From: Jerome Brunet @ 2020-07-01 9:45 UTC (permalink / raw)
To: Kevin Hilman; +Cc: Jerome Brunet, linux-amlogic, devicetree, linux-kernel
Add support for audio on jack socket of the odroid-n2
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 79 +++++++++++++++++--
1 file changed, 74 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index d4421ad164bd..34fffa6d859d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -9,6 +9,7 @@
#include "meson-g12b-s922x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
@@ -20,6 +21,14 @@ aliases {
ethernet0 = ðmac;
};
+ dioo2133: audio-amplifier-0 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ VCC-supply = <&vcc_5v>;
+ sound-name-prefix = "U19";
+ status = "okay";
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -209,16 +218,26 @@ hdmi_connector_in: endpoint {
sound {
compatible = "amlogic,axg-sound-card";
model = "G12B-ODROID-N2";
- audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>,
- <&tdmin_c>, <&tdmin_lb>;
+ audio-widgets = "Line", "Lineout";
+ audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
+ <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
+ <&dioo2133>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT",
+ "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "TDMOUT_C IN 1", "FRDDR_B OUT 2",
+ "TDMOUT_C IN 2", "FRDDR_C OUT 2",
+ "TDM_C Playback", "TDMOUT_C OUT",
"TDMIN_A IN 4", "TDM_B Loopback",
"TDMIN_B IN 4", "TDM_B Loopback",
"TDMIN_C IN 4", "TDM_B Loopback",
"TDMIN_LB IN 1", "TDM_B Loopback",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TDMIN_B IN 5", "TDM_C Loopback",
+ "TDMIN_C IN 5", "TDM_C Loopback",
+ "TDMIN_LB IN 2", "TDM_C Loopback",
"TODDR_A IN 0", "TDMIN_A OUT",
"TODDR_B IN 0", "TDMIN_A OUT",
"TODDR_C IN 0", "TDMIN_A OUT",
@@ -230,7 +249,11 @@ sound {
"TODDR_C IN 2", "TDMIN_C OUT",
"TODDR_A IN 6", "TDMIN_LB OUT",
"TODDR_B IN 6", "TDMIN_LB OUT",
- "TODDR_C IN 6", "TDMIN_LB OUT";
+ "TODDR_C IN 6", "TDMIN_LB OUT",
+ "U19 INL", "ACODEC LOLP",
+ "U19 INR", "ACODEC LORP",
+ "Lineout", "U19 OUTL",
+ "Lineout", "U19 OUTR";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
@@ -275,22 +298,56 @@ dai-link-6 {
dai-tdm-slot-tx-mask-3 = <1 1>;
mclk-fs = <256>;
- codec {
+ codec-0 {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
};
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_B>;
+ };
};
- /* hdmi glue */
+ /* i2s jack output interface */
dai-link-7 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+ };
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_C>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-8 {
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
codec {
sound-dai = <&hdmi_tx>;
};
};
+
+ /* acodec glue */
+ dai-link-9 {
+ sound-dai = <&toacodec TOACODEC_OUT>;
+
+ codec {
+ sound-dai = <&acodec>;
+ };
+ };
};
};
+&acodec {
+ AVDD-supply = <&vddao_1v8>;
+ status = "okay";
+};
+
&arb {
status = "okay";
};
@@ -505,6 +562,10 @@ &tdmif_b {
status = "okay";
};
+&tdmif_c {
+ status = "okay";
+};
+
&tdmin_a {
status = "okay";
};
@@ -525,6 +586,14 @@ &tdmout_b {
status = "okay";
};
+&tdmout_c {
+ status = "okay";
+};
+
+&toacodec {
+ status = "okay";
+};
+
&tohdmitx {
status = "okay";
};
--
2.25.4
^ permalink raw reply related [flat|nested] 4+ messages in thread