From: Jacopo Mondi <jacopo+renesas@jmondi.org> To: robh+dt@kernel.org, devicetree@vger.kernel.org, linux-media@vger.kernel.org Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>, mchehab@kernel.org, sakari.ailus@linux.intel.com, hverkuil-cisco@xs4all.nl, laurent.pinchart@ideasonboard.com, linux-renesas-soc@vger.kernel.org, Ricardo Ribalda <ribalda@kernel.org> Subject: [PATCH 6/8] dt-bindings: media: imx214: Convert to json-schema Date: Wed, 15 Jul 2020 16:09:49 +0200 Message-ID: <20200715140951.90753-7-jacopo+renesas@jmondi.org> (raw) In-Reply-To: <20200715140951.90753-1-jacopo+renesas@jmondi.org> Convert the imx214 bindings document to json-schema and update the MAINTAINERS file accordingly. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- .../bindings/media/i2c/sony,imx214.txt | 53 -------- .../bindings/media/i2c/sony,imx214.yaml | 124 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 125 insertions(+), 54 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.txt create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt deleted file mode 100644 index f11f28a5fda4..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor - -The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with -an active array size of 4224H x 3200V. It is programmable through an I2C -interface. -Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum -throughput of 1.2Gbps/lane. - - -Required Properties: -- compatible: Shall be "sony,imx214". -- reg: I2C bus address of the device. Depending on how the sensor is wired, - it shall be <0x10> or <0x1a>; -- enable-gpios: GPIO descriptor for the enable pin. -- vdddo-supply: Chip digital IO regulator (1.8V). -- vdda-supply: Chip analog regulator (2.7V). -- vddd-supply: Chip digital core regulator (1.12V). -- clocks: Reference to the xclk clock. -- clock-frequency: Frequency of the xclk clock. - -Optional Properties: -- flash-leds: See ../video-interfaces.txt -- lens-focus: See ../video-interfaces.txt - -The imx214 device node shall contain one 'port' child node with -an 'endpoint' subnode. For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Required Properties on endpoint: -- data-lanes: check ../video-interfaces.txt -- link-frequencies: check ../video-interfaces.txt -- remote-endpoint: check ../video-interfaces.txt - -Example: - - camera-sensor@1a { - compatible = "sony,imx214"; - reg = <0x1a>; - vdddo-supply = <&pm8994_lvs1>; - vddd-supply = <&camera_vddd_1v12>; - vdda-supply = <&pm8994_l17>; - lens-focus = <&ad5820>; - enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; - clocks = <&mmcc CAMSS_MCLK0_CLK>; - clock-frequency = <24000000>; - port { - imx214_ep: endpoint { - data-lanes = <1 2 3 4>; - link-frequencies = /bits/ 64 <480000000>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml new file mode 100644 index 000000000000..d3e83139b7c7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor + +maintainers: + - Ricardo Ribalda <ribalda@kernel.org> + +description: -| + The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with + an active array size of 4224H x 3200V. It is programmable through an I2C + interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a + maximum throughput of 1.2Gbps/lane. + +properties: + compatible: + const: sony,imx214 + + reg: + description: -| + I2C device address. Depending on how the sensor is wired, it shall be + <0x10> or <0x1a> + maxItems: 1 + + clocks: + description: Reference to the xclk clock. + maxItems: 1 + + clock-frequency: + description: Frequency of the xclk clock in Hz. + + enable-gpios: + description: GPIO descriptor for the enable pin. + maxItems: 1 + + vdddo-supply: + description: Chip digital IO regulator (1.8V). + maxItems: 1 + + vdda-supply: + description: Chip analog regulator (2.7V). + maxItems: 1 + + vddd-supply: + description: Chip digital core regulator (1.12V). + maxItems: 1 + + flash-leds: + description: See ../video-interfaces.txt + + lens-focus: + description: See ../video-interfaces.txt + + port: + type: object + description: | + The device node must contain one 'port' child node for its digital output + video port, in accordance with the video interface bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + endpoint: + type: object + properties: + remote-endpoint: + description: check ../video-interfaces.txt + + data-lanes: + description: check ../video-interfaces.txt + + link-frequencies: + description: check ../video-interfaces.txt + + required: + - remote-endpoint + - data-lanes + - link-frequencies + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-frequency + - enable-gpios + - vdddo-supply + - vdda-supply + - vddd-supply + - port + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + camera-sensor@1a { + compatible = "sony,imx214"; + reg = <0x1a>; + vdddo-supply = <&pm8994_lvs1>; + vddd-supply = <&camera_vddd_1v12>; + vdda-supply = <&pm8994_l17>; + lens-focus = <&ad5820>; + enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + clocks = <&camera_clk>; + clock-frequency = <24000000>; + + port { + imx214_ep: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <480000000>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index a30f08ddaead..efd9cc9c44c9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15899,7 +15899,7 @@ M: Ricardo Ribalda <ribalda@kernel.org> L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media_tree.git -F: Documentation/devicetree/bindings/media/i2c/sony,imx214.txt +F: Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml F: drivers/media/i2c/imx214.c SONY IMX219 SENSOR DRIVER -- 2.27.0
next prev parent reply index Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-15 14:09 [PATCH 0/8] dt-bindings: media: i2c: " Jacopo Mondi 2020-07-15 14:09 ` [PATCH 1/8] dt-bindings: media: ov5640: " Jacopo Mondi 2020-07-15 17:04 ` Steve Longerbeam 2020-07-16 7:06 ` Jacopo Mondi 2020-07-16 1:53 ` Laurent Pinchart 2020-07-16 7:04 ` Jacopo Mondi 2020-07-16 13:08 ` Laurent Pinchart 2020-07-16 7:52 ` Geert Uytterhoeven 2020-07-16 14:51 ` Rob Herring 2020-07-15 14:09 ` [PATCH 2/8] dt-bindings: media: ov5645: " Jacopo Mondi 2020-07-15 15:31 ` Manivannan Sadhasivam 2020-07-15 14:09 ` [PATCH 3/8] dt-bindings: media: mt9v111: " Jacopo Mondi 2020-07-15 14:09 ` [PATCH 4/8] dt-bindings: media: imx290: " Jacopo Mondi 2020-07-15 14:09 ` [PATCH 5/8] dt-bindings: media: imx274: " Jacopo Mondi 2020-07-15 14:09 ` Jacopo Mondi [this message] 2020-07-15 14:09 ` [PATCH 7/8] dt-bindings: media: ov772x: " Jacopo Mondi 2020-07-15 14:09 ` [PATCH 8/8] dt-bindings: media: i2c: Add prefix to yaml bindings Jacopo Mondi 2020-08-17 15:12 ` [PATCH 0/8] dt-bindings: media: i2c: Convert to json-schema Jacopo Mondi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200715140951.90753-7-jacopo+renesas@jmondi.org \ --to=jacopo+renesas@jmondi.org \ --cc=devicetree@vger.kernel.org \ --cc=hverkuil-cisco@xs4all.nl \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-media@vger.kernel.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=mchehab@kernel.org \ --cc=ribalda@kernel.org \ --cc=robh+dt@kernel.org \ --cc=sakari.ailus@linux.intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Linux-Devicetree Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git git clone --mirror https://lore.kernel.org/linux-devicetree/1 linux-devicetree/git/1.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \ devicetree@vger.kernel.org public-inbox-index linux-devicetree Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree AGPL code for this site: git clone https://public-inbox.org/public-inbox.git