From: Ben Levinsky <ben.levinsky@xilinx.com>
To: stefano.stabellini@xilinx.com, michal.simek@xilinx.com
Cc: mathieu.poirier@linaro.org, robh+dt@kernel.org,
linux-remoteproc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 2/5] firmware: xilinx: Add shutdown/wakeup APIs
Date: Fri, 31 Jul 2020 09:47:51 -0700 [thread overview]
Message-ID: <20200731164754.20505-3-ben.levinsky@xilinx.com> (raw)
In-Reply-To: <20200731164754.20505-1-ben.levinsky@xilinx.com>
Add shutdown/wakeup a resource eemi operations to shutdown
or bringup a resource.
Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
---
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around
function pointer in xilinx eemi ops struct
- fix formatting
v4:
- add default values for enum
---
drivers/firmware/xilinx/zynqmp.c | 35 ++++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 22 +++++++++++++++++
2 files changed, 57 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 8d1ff2454e2e..f1a0bd35deeb 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -846,6 +846,41 @@ int zynqmp_pm_release_node(const u32 node)
}
EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
+/**
+ * zynqmp_pm_force_powerdown - PM call to request for another PU or subsystem to
+ * be powered down forcefully
+ * @target: Node ID of the targeted PU or subsystem
+ * @ack: Flag to specify whether acknowledge is requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_force_powerdown(const u32 target,
+ const enum zynqmp_pm_request_ack ack)
+{
+ return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, target, ack, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_force_powerdown);
+
+/**
+ * zynqmp_pm_request_wakeup - PM call to wake up selected master or subsystem
+ * @node: Node ID of the master or subsystem
+ * @set_addr: Specifies whether the address argument is relevant
+ * @address: Address from which to resume when woken up
+ * @ack: Flag to specify whether acknowledge requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_request_wakeup(const u32 node,
+ const bool set_addr,
+ const u64 address,
+ const enum zynqmp_pm_request_ack ack)
+{
+ /* set_addr flag is encoded into 1st bit of address */
+ return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, node, address | set_addr,
+ address >> 32, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_request_wakeup);
+
/**
* zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
* @node: Node ID of the slave
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index bb347dfe4ba4..4d83a7d69c4c 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -64,6 +64,8 @@
enum pm_api_id {
PM_GET_API_VERSION = 1,
+ PM_FORCE_POWERDOWN = 8,
+ PM_REQUEST_WAKEUP = 10,
PM_SYSTEM_SHUTDOWN = 12,
PM_REQUEST_NODE = 13,
PM_RELEASE_NODE,
@@ -376,6 +378,12 @@ int zynqmp_pm_write_pggs(u32 index, u32 value);
int zynqmp_pm_read_pggs(u32 index, u32 *value);
int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype);
int zynqmp_pm_set_boot_health_status(u32 value);
+int zynqmp_pm_force_powerdown(const u32 target,
+ const enum zynqmp_pm_request_ack ack);
+int zynqmp_pm_request_wakeup(const u32 node,
+ const bool set_addr,
+ const u64 address,
+ const enum zynqmp_pm_request_ack ack);
#else
static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
{
@@ -526,6 +534,20 @@ static inline int zynqmp_pm_set_boot_health_status(u32 value)
{
return -ENODEV;
}
+
+static inline int zynqmp_pm_force_powerdown(const u32 target,
+ const enum zynqmp_pm_request_ack ack)
+{
+ return -ENODEV;
+}
+
+static inline int zynqmp_pm_request_wakeup(const u32 node,
+ const bool set_addr,
+ const u64 address,
+ const enum zynqmp_pm_request_ack ack)
+{
+ return -ENODEV;
+}
#endif
#endif /* __FIRMWARE_ZYNQMP_H__ */
--
2.17.1
next prev parent reply other threads:[~2020-07-31 16:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-31 16:47 [PATCH v7 0/5] Provide basic driver to control Arm R5 co-processor found on Ben Levinsky
2020-07-31 16:47 ` [PATCH v7 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Ben Levinsky
2020-07-31 16:47 ` Ben Levinsky [this message]
2020-07-31 16:47 ` [PATCH v7 3/5] firmware: xilinx: Add RPU configuration APIs Ben Levinsky
2020-07-31 16:47 ` [PATCH v7 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Ben Levinsky
2020-07-31 16:47 ` [PATCH v7 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver Ben Levinsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200731164754.20505-3-ben.levinsky@xilinx.com \
--to=ben.levinsky@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=stefano.stabellini@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).