From: Biju Das <biju.das.jz@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
Chris Paterson <Chris.Paterson2@renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v3] ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
Date: Mon, 10 Aug 2020 18:49:44 +0100 [thread overview]
Message-ID: <20200810174944.2892-1-biju.das.jz@bp.renesas.com> (raw)
As per the iWave RZ/G1M schematic, the signal LVDS_PPEN controls supply
voltage for touch panel, LVDS receiver and RGB LCD panel. Add regulator
for these device nodes and remove powerdown-gpios property from
lvds-receiver node as it results in touch controller driver probe failure.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
This patch depend on below patches
1) https://patchwork.kernel.org/patch/11707595/
2) https://patchwork.kernel.org/patch/11707593/
v2->v3 : Added the missing part from the patch. removal of powerdown-gpios property.
v1->v2 : Add regulator in touch panel, LVDS receiver and RGB LCD panel device nodes
(Ref: https://patchwork.kernel.org/patch/11707559/)
v1 : https://patchwork.kernel.org/patch/11705819/
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ebbe1518ef8a..056f93119d8a 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -57,7 +57,7 @@
lvds-receiver {
compatible = "ti,ds90cf384a", "lvds-decoder";
- powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vcc_3v3_tft1>;
ports {
#address-cells = <1>;
@@ -81,6 +81,7 @@
panel {
compatible = "edt,etm0700g0dh6";
backlight = <&lcd_backlight>;
+ power-supply = <&vcc_3v3_tft1>;
port {
panel_in: endpoint {
@@ -113,6 +114,17 @@
};
};
+ vcc_3v3_tft1: regulator-panel {
+ compatible = "regulator-fixed";
+
+ regulator-name = "Panel Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ startup-delay-us = <70000>;
+ gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+ };
+
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
@@ -207,6 +219,7 @@
reg = <0x38>;
interrupt-parent = <&gpio2>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ vcc-supply = <&vcc_3v3_tft1>;
};
};
--
2.17.1
next reply other threads:[~2020-08-10 17:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-10 17:49 Biju Das [this message]
2020-08-11 10:50 ` [PATCH v3] ARM: dts: iwg20d-q7-common: Fix touch controller probe failure Laurent Pinchart
2020-08-11 11:14 ` Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200810174944.2892-1-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=biju.das@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).