Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5
@ 2020-09-01  7:54 Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 01/13] ARM: dts: exynos: Correct compatible for Exynos5 GIC Krzysztof Kozlowski
                   ` (13 more replies)
  0 siblings, 14 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

Hi,

This is continuation of my series of dtschema cleanup for Exynos SoCs.

The previous series are here:
https://lore.kernel.org/linux-samsung-soc/20200830135200.24304-1-krzk@kernel.org/T/#t
https://lore.kernel.org/linux-samsung-soc/20200830135200.24304-1-krzk@kernel.org/T/#t
https://lore.kernel.org/linux-samsung-soc/20200830135200.24304-1-krzk@kernel.org/T/#t
https://lore.kernel.org/linux-samsung-soc/20200830135200.24304-1-krzk@kernel.org/T/#t

TODO - remaining: S3C, S5Pv210.

Best regards,
Krzysztof

Krzysztof Kozlowski (13):
  ARM: dts: exynos: Correct compatible for Exynos5 GIC
  ARM: dts: exynos: Correct compatible for Exynos5260 GIC
  ARM: dts: exynos: Remove unneeded address/size cells in Exynos5260 GIC
  ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410
  ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250
    Arndale
  ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5
  ARM: dts: exynos: Override thermal by label in Exynos5250
  ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250
  ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring
  ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning in
    Exynos5250 Spring
  ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale
  ARM: dts: exynos: Silence SATA PHY warning in SMDK5250
  ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420

 arch/arm/boot/dts/exynos5.dtsi                | 10 ++--
 arch/arm/boot/dts/exynos5250-arndale.dts      | 12 ++---
 arch/arm/boot/dts/exynos5250-smdk5250.dts     |  8 +++-
 arch/arm/boot/dts/exynos5250-spring.dts       | 41 ++++++++++-------
 arch/arm/boot/dts/exynos5250.dtsi             | 46 +++++++++----------
 arch/arm/boot/dts/exynos5260.dtsi             |  4 +-
 arch/arm/boot/dts/exynos5410-odroidxu.dts     |  8 ++--
 arch/arm/boot/dts/exynos5410-smdk5410.dts     | 12 +++++
 arch/arm/boot/dts/exynos5410.dtsi             | 12 ++---
 arch/arm/boot/dts/exynos5420-smdk5420.dts     |  3 ++
 arch/arm/boot/dts/exynos5420.dtsi             | 16 +++----
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi |  4 +-
 12 files changed, 99 insertions(+), 77 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 01/13] ARM: dts: exynos: Correct compatible for Exynos5 GIC
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-03 20:48   ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 02/13] ARM: dts: exynos: Correct compatible for Exynos5260 GIC Krzysztof Kozlowski
                   ` (12 subsequent siblings)
  13 siblings, 1 reply; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

Exynos5250 and Exynso54xx SoCs have ARM GIC 400.  Correct the
compatibles to match dtschema and fix the dtbs_check warnings like:

  arch/arm/boot/dts/exynos5420-peach-pit.dt.yaml: interrupt-controller@10481000:
    compatible: ['arm,gic-400', 'arm,cortex-a15-gic', 'arm,cortex-a9-gic']
    is not valid under any of the given schemas

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 22eb951c614c..9660104be4c9 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -86,7 +86,7 @@
 		};
 
 		gic: interrupt-controller@10481000 {
-			compatible = "arm,gic-400", "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			compatible = "arm,gic-400", "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg =	<0x10481000 0x1000>,
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 02/13] ARM: dts: exynos: Correct compatible for Exynos5260 GIC
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 01/13] ARM: dts: exynos: Correct compatible for Exynos5 GIC Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 03/13] ARM: dts: exynos: Remove unneeded address/size cells in " Krzysztof Kozlowski
                   ` (11 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

Exynos5260 SoCs have ARM GIC 400.  Correct the compatibles to match
dtschema and fix the dtbs_check warnings like:

  arch/arm/boot/dts/exynos5260-xyref5260.dt.yaml: interrupt-controller@10481000:
    compatible: ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is not valid under any of the given schemas

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5260.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 154df70128f3..9b45e052cca9 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -162,7 +162,7 @@
 		};
 
 		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			compatible = "arm,gic-400", "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 03/13] ARM: dts: exynos: Remove unneeded address/size cells in Exynos5260 GIC
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 01/13] ARM: dts: exynos: Correct compatible for Exynos5 GIC Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 02/13] ARM: dts: exynos: Correct compatible for Exynos5260 GIC Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 04/13] ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410 Krzysztof Kozlowski
                   ` (10 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

The Exynos5260 GIC node does not have any children so remove the address
and size cells as they are not needed by DT bindings.  The size-cells of
'0' were also incorrect.  This fixes dtbs_check warning:

  arch/arm/boot/dts/exynos5260-xyref5260.dt.yaml: interrupt-controller@10481000: #size-cells:0:0: 1 was expected

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5260.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 9b45e052cca9..973448c4ad93 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -164,8 +164,6 @@
 		gic: interrupt-controller@10481000 {
 			compatible = "arm,gic-400", "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			#size-cells = <0>;
 			interrupt-controller;
 			reg = <0x10481000 0x1000>,
 				<0x10482000 0x2000>,
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 04/13] ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (2 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 03/13] ARM: dts: exynos: Remove unneeded address/size cells in " Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 05/13] ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 Arndale Krzysztof Kozlowski
                   ` (9 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However the PMIC is not described in DTS at all so at least add
a workaround to model its clock with a fixed-clock.  This fixes S3C RTC
and silences dtbs_check warnings like:

  arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clocks: [[5, 317]] is too short
  arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410-smdk5410.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 5282b5deca86..2a3ade77a2de 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -29,6 +29,13 @@
 		#clock-cells = <0>;
 	};
 
+	pmic_ap_clk: pmic-ap-clk {
+		/* Workaround for missing PMIC and its clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
 	firmware@2037000 {
 		compatible = "samsung,secure-firmware";
 		reg = <0x02037000 0x1000>;
@@ -79,6 +86,11 @@
 	};
 };
 
+&rtc {
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
 &sromc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 05/13] ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 Arndale
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (3 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 04/13] ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410 Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 06/13] ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5 Krzysztof Kozlowski
                   ` (8 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

The name of I2C controller over GPIO lines node ends with '-gpio' which
confuses dtschema:

  arch/arm/boot/dts/exynos5250-arndale.dt.yaml: soc: i2c-gpio:
    {'pinctrl-names': ['default'], ... 'phandle': [[65]]} is not of type 'array'
    From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml

Add a '-10' (there are already 0-9 I2C controllers on the SoC) suffix to
silence it.  This pattern on naming i2c-gpio is already present in many
other dts.  No functional change.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 59872d83da6e..ec94af640cd5 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -624,7 +624,7 @@
 	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
 	 * controllers. Lets use software I2C over GPIO pins as a workaround.
 	 */
-	i2c_ddc: i2c-gpio {
+	i2c_ddc: i2c-10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c2_gpio_bus>;
 		status = "okay";
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 06/13] ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (4 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 05/13] ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 Arndale Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 07/13] ARM: dts: exynos: Override thermal by label in Exynos5250 Krzysztof Kozlowski
                   ` (7 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

Remove double space after '=' and fix indentation in Exynos5250,
Exynos5410 and Exynos5420 DTS files.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5.dtsi                |  8 ++---
 arch/arm/boot/dts/exynos5250-arndale.dts      | 10 +++----
 arch/arm/boot/dts/exynos5250-spring.dts       | 30 +++++++++----------
 arch/arm/boot/dts/exynos5250.dtsi             |  8 ++---
 arch/arm/boot/dts/exynos5410-odroidxu.dts     |  8 ++---
 arch/arm/boot/dts/exynos5410.dtsi             | 12 ++++----
 arch/arm/boot/dts/exynos5420.dtsi             | 16 +++++-----
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi |  4 +--
 8 files changed, 48 insertions(+), 48 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 9660104be4c9..9ce9fb3fc190 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -211,13 +211,13 @@
 		};
 
 		prng: rng@10830400 {
-		      compatible = "samsung,exynos5250-prng";
-		      reg = <0x10830400 0x200>;
+			compatible = "samsung,exynos5250-prng";
+			reg = <0x10830400 0x200>;
 		};
 
 		trng: rng@10830600 {
-		      compatible = "samsung,exynos5250-trng";
-		      reg = <0x10830600 0x100>;
+			compatible = "samsung,exynos5250-trng";
+			reg = <0x10830600 0x100>;
 		};
 
 		g2d: g2d@10850000 {
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index ec94af640cd5..f2bcce167b2d 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -243,11 +243,11 @@
 		s5m8767,pmic-buck3-dvs-voltage = <1100000>;
 		s5m8767,pmic-buck4-dvs-voltage = <1200000>;
 		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
-		                              <&gpd1 1 GPIO_ACTIVE_HIGH>,
-		                              <&gpd1 2 GPIO_ACTIVE_HIGH>;
+					      <&gpd1 1 GPIO_ACTIVE_HIGH>,
+					      <&gpd1 2 GPIO_ACTIVE_HIGH>;
 		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
-		                             <&gpx2 4 GPIO_ACTIVE_HIGH>,
-		                             <&gpx2 5 GPIO_ACTIVE_HIGH>;
+					     <&gpx2 4 GPIO_ACTIVE_HIGH>,
+					     <&gpx2 5 GPIO_ACTIVE_HIGH>;
 
 		s5m8767_osc: clocks {
 			compatible = "samsung,s5m8767-clk";
@@ -544,7 +544,7 @@
 	samsung,i2c-max-bus-freq = <40000>;
 	samsung,i2c-slave-addr = <0x38>;
 
-	sata_phy_i2c:sata-phy@38 {
+	sata_phy_i2c: sata-phy@38 {
 		compatible = "samsung,exynos-sataphy-i2c";
 		reg = <0x38>;
 	};
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index 3d501926c227..b6fcf847fc2f 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -114,12 +114,12 @@
 		wakeup-source;
 
 		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
-		                              <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
-		                              <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+					      <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+					      <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
 
 		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
-		                             <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
-		                             <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+					     <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+					     <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
 
 		/*
 		 * The following arrays of DVS voltages are not used, since we are
@@ -127,26 +127,26 @@
 		 * to please the driver.
 		 */
 		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
-		                                 <1250000>, <1200000>,
-		                                 <1150000>, <1100000>,
-		                                 <1000000>, <950000>;
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
 
 		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
-		                                 <1100000>, <1100000>,
-		                                 <1000000>, <1000000>,
-		                                 <1000000>, <1000000>;
+						 <1100000>, <1100000>,
+						 <1000000>, <1000000>,
+						 <1000000>, <1000000>;
 
 		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
-		                                 <1200000>, <1200000>,
-		                                 <1200000>, <1200000>,
-		                                 <1200000>, <1200000>;
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
 
 		clocks {
 			compatible = "samsung,s5m8767-clk";
 			#clock-cells = <1>;
 			clock-output-names = "en32khz_ap",
-			                     "en32khz_cp",
-			                     "en32khz_bt";
+					     "en32khz_cp",
+					     "en32khz_bt";
 		};
 
 		regulators {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index e3dbe4166836..0249d16e187f 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -723,7 +723,7 @@
 			#dma-requests = <1>;
 		};
 
-		gsc_0:  gsc@13e00000 {
+		gsc_0: gsc@13e00000 {
 			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
 			reg = <0x13e00000 0x1000>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -733,7 +733,7 @@
 			iommus = <&sysmmu_gsc0>;
 		};
 
-		gsc_1:  gsc@13e10000 {
+		gsc_1: gsc@13e10000 {
 			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
 			reg = <0x13e10000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -743,7 +743,7 @@
 			iommus = <&sysmmu_gsc1>;
 		};
 
-		gsc_2:  gsc@13e20000 {
+		gsc_2: gsc@13e20000 {
 			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
 			reg = <0x13e20000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
@@ -753,7 +753,7 @@
 			iommus = <&sysmmu_gsc2>;
 		};
 
-		gsc_3:  gsc@13e30000 {
+		gsc_3: gsc@13e30000 {
 			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
 			reg = <0x13e30000 0x1000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 4f9297ae0763..75b4150c26d7 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -109,10 +109,10 @@
 	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
 			<&clock_audss EXYNOS_MOUT_AUDSS>;
 
-	assigned-clock-rates =  <0>,
-				<0>,
-				<96000000>,
-				<19200000>;
+	assigned-clock-rates = <0>,
+			       <0>,
+			       <96000000>,
+			       <19200000>;
 };
 
 &cpu0_thermal {
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index abe75b9e39f5..60a87684b1af 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -238,16 +238,16 @@
 			#include "exynos5420-trip-points.dtsi"
 		};
 		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmu_cpu1>;
-		       #include "exynos5420-trip-points.dtsi"
+			thermal-sensors = <&tmu_cpu1>;
+			#include "exynos5420-trip-points.dtsi"
 		};
 		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmu_cpu2>;
-		       #include "exynos5420-trip-points.dtsi"
+			thermal-sensors = <&tmu_cpu2>;
+			#include "exynos5420-trip-points.dtsi"
 		};
 		cpu3_thermal: cpu3-thermal {
-		       thermal-sensors = <&tmu_cpu3>;
-		       #include "exynos5420-trip-points.dtsi"
+			thermal-sensors = <&tmu_cpu3>;
+			#include "exynos5420-trip-points.dtsi"
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index c76460b70532..83580f076a58 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1199,20 +1199,20 @@
 			#include "exynos5420-trip-points.dtsi"
 		};
 		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmu_cpu1>;
-		       #include "exynos5420-trip-points.dtsi"
+			thermal-sensors = <&tmu_cpu1>;
+			#include "exynos5420-trip-points.dtsi"
 		};
 		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmu_cpu2>;
-		       #include "exynos5420-trip-points.dtsi"
+			thermal-sensors = <&tmu_cpu2>;
+			#include "exynos5420-trip-points.dtsi"
 		};
 		cpu3_thermal: cpu3-thermal {
-		       thermal-sensors = <&tmu_cpu3>;
-		       #include "exynos5420-trip-points.dtsi"
+			thermal-sensors = <&tmu_cpu3>;
+			#include "exynos5420-trip-points.dtsi"
 		};
 		gpu_thermal: gpu-thermal {
-		       thermal-sensors = <&tmu_gpu>;
-		       #include "exynos5420-trip-points.dtsi"
+			thermal-sensors = <&tmu_gpu>;
+			#include "exynos5420-trip-points.dtsi"
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index afe090578e8f..b1cf9414ce17 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -333,8 +333,8 @@
 		compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
 		density		= <16384>;
 		io-width	= <32>;
-		#address-cells  = <1>;
-		#size-cells     = <0>;
+		#address-cells	= <1>;
+		#size-cells	= <0>;
 
 		tRFC-min-tck		= <17>;
 		tRRD-min-tck		= <2>;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 07/13] ARM: dts: exynos: Override thermal by label in Exynos5250
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (5 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 06/13] ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5 Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 08/13] ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250 Krzysztof Kozlowski
                   ` (6 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired.  This will lead to run-time errors
that could be hard to detect.

A mistyped label on the other hand, will cause a dtc compile error
(during build time).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5250.dtsi | 38 +++++++++++++++----------------
 1 file changed, 18 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 0249d16e187f..488d3f9fab59 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -1085,26 +1085,6 @@
 		};
 	};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
-
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 15 15>,
-						      <&cpu1 15 15>;
-			       };
-		       };
-		};
-	};
-
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -1120,6 +1100,24 @@
 	};
 };
 
+&cpu_thermal {
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
+	thermal-sensors = <&tmu 0>;
+
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 15 15>,
+					 <&cpu1 15 15>;
+		};
+	};
+};
+
 &dp {
 	power-domains = <&pd_disp1>;
 	clocks = <&clock CLK_DP>;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 08/13] ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (6 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 07/13] ARM: dts: exynos: Override thermal by label in Exynos5250 Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 09/13] ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring Krzysztof Kozlowski
                   ` (5 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

Add clock-cells to max77686 PMIC node so its 32 kHz clocks could be used
later in the S3C RTC node. Except making the S3C RTC working, this also
fixes dtbs_check warnings:

  arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short
  arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5250-smdk5250.dts | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 5c42df024adf..00af7fb65080 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/maxim,max77686.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos5250.dtsi"
@@ -129,13 +130,14 @@
 		reg = <0x50>;
 	};
 
-	max77686@9 {
+	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
+		#clock-cells = <1>;
 		wakeup-source;
 
 		voltage-regulators {
@@ -368,6 +370,8 @@
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &sata {
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 09/13] ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (7 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 08/13] ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250 Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 10/13] ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning " Krzysztof Kozlowski
                   ` (4 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

Use the 32 kHz clock from S5M8767 PMIC in the S3C RTC node. Except
making the S3C RTC working, this also fixes dtbs_check warnings:

  arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short
  arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5250-spring.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index b6fcf847fc2f..166a0d287633 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
@@ -141,7 +142,7 @@
 						 <1200000>, <1200000>,
 						 <1200000>, <1200000>;
 
-		clocks {
+		s5m8767_osc: clocks {
 			compatible = "samsung,s5m8767-clk";
 			#clock-cells = <1>;
 			clock-output-names = "en32khz_ap",
@@ -522,6 +523,12 @@
 	};
 };
 
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
 &sd1_bus4 {
 	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 10/13] ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning in Exynos5250 Spring
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (8 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 09/13] ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale Krzysztof Kozlowski
                   ` (3 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

The pin configuration of Display Port HPD GPIO emds with '-gpio' which
confuses dtschema:

  arch/arm/boot/dts/exynos5250-spring.dt.yaml: pinctrl@11400000: dp-hpd-gpio:
    {'samsung,pins': ['gpc3-0'], ... 'samsung,pin-drv': [[0]], 'phandle': [[23]]} is not of type 'array'
    From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5250-spring.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index 166a0d287633..a92ade33779c 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -457,7 +457,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp-hpd-gpio {
+	dp_hpd_gpio: dp-hpd {
 		samsung,pins = "gpc3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (9 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 10/13] ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning " Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  8:13   ` Marek Szyprowski
  2020-09-01  7:54 ` [PATCH 12/13] ARM: dts: exynos: Silence SATA PHY warning in SMDK5250 Krzysztof Kozlowski
                   ` (2 subsequent siblings)
  13 siblings, 1 reply; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

The SATA PHY in Exynos5250 SoCs has two interfaces and two device nodes:
1. sata-phy@12170000
2. i2c-9/i2c@38

The first node represents the actual SATA PHY device with phy-cells.
The second represents additional I2C interface, needed by the driver
to communicate with the SATA PHY device.  It is not a PHY-provider in
the terms of dtschema so rename it to silence dtbs_check warning:

  arch/arm/boot/dts/exynos5250-arndale.dt.yaml: sata-phy@38: '#phy-cells' is a required property
    From schema: lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index f2bcce167b2d..3c401c82905c 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -544,7 +544,7 @@
 	samsung,i2c-max-bus-freq = <40000>;
 	samsung,i2c-slave-addr = <0x38>;
 
-	sata_phy_i2c: sata-phy@38 {
+	sata_phy_i2c: sata-phy-i2c@38 {
 		compatible = "samsung,exynos-sataphy-i2c";
 		reg = <0x38>;
 	};
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 12/13] ARM: dts: exynos: Silence SATA PHY warning in SMDK5250
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (10 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-01  7:54 ` [PATCH 13/13] ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420 Krzysztof Kozlowski
  2020-09-01  8:02 ` [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

The SATA PHY in Exynos5250 SoCs has two interfaces and two device nodes:
1. sata-phy@12170000
2. i2c-9/i2c@38

The first node represents the actual SATA PHY device with phy-cells.
The second represents additional I2C interface, needed by the driver
to communicate with the SATA PHY device.  It is not a PHY-provider in
the terms of dtschema so rename it to silence dtbs_check warning:

  arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: sata-phy@38: '#phy-cells' is a required property
    From schema: lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 00af7fb65080..e613814da386 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -328,7 +328,7 @@
 	samsung,i2c-max-bus-freq = <40000>;
 	samsung,i2c-slave-addr = <0x38>;
 
-	sata_phy_i2c: sata-phy@38 {
+	sata_phy_i2c: sata-phy-i2c@38 {
 		compatible = "samsung,exynos-sataphy-i2c";
 		reg = <0x38>;
 	};
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 13/13] ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (11 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 12/13] ARM: dts: exynos: Silence SATA PHY warning in SMDK5250 Krzysztof Kozlowski
@ 2020-09-01  7:54 ` Krzysztof Kozlowski
  2020-09-04  8:59   ` Krzysztof Kozlowski
  2020-09-01  8:02 ` [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
  13 siblings, 1 reply; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  7:54 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

Use the 32 kHz clock from S2MPS11 PMIC in the S3C RTC node. Except
making the S3C RTC working, this also fixes dtbs_check warnings:

  arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clocks: [[2, 317]] is too short
  arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5420-smdk5420.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 83fa800fa1eb..4e49d8095b29 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "exynos5420.dtsi"
 #include "exynos5420-cpus.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -401,6 +402,8 @@
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &usbdrd_phy0 {
-- 
2.17.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5
  2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
                   ` (12 preceding siblings ...)
  2020-09-01  7:54 ` [PATCH 13/13] ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420 Krzysztof Kozlowski
@ 2020-09-01  8:02 ` Krzysztof Kozlowski
  13 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  8:02 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

On Tue, 1 Sep 2020 at 09:54, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> Hi,
>
> This is continuation of my series of dtschema cleanup for Exynos SoCs.
>
> The previous series are here:
> https://lore.kernel.org/linux-samsung-soc/20200830135200.24304-1-krzk@kernel.org/T/#t

Except the first one, other links are wrong. Here are correct:
https://lore.kernel.org/linux-samsung-soc/20200829142948.32365-1-krzk@kernel.org/T/#t
https://lore.kernel.org/linux-samsung-soc/ec9deeb1-8599-d755-cbfa-5db9787368e1@samsung.com/T/#t
https://lore.kernel.org/linux-samsung-soc/20200829210652.GD796939@ravnborg.org/T/#t

Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale
  2020-09-01  7:54 ` [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale Krzysztof Kozlowski
@ 2020-09-01  8:13   ` Marek Szyprowski
  2020-09-01  8:17     ` Krzysztof Kozlowski
  0 siblings, 1 reply; 22+ messages in thread
From: Marek Szyprowski @ 2020-09-01  8:13 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Rob Herring, Kukjin Kim, devicetree,
	linux-arm-kernel, linux-samsung-soc, linux-kernel
  Cc: Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

Hi Krzysztof,

On 01.09.2020 09:54, Krzysztof Kozlowski wrote:
> The SATA PHY in Exynos5250 SoCs has two interfaces and two device nodes:
> 1. sata-phy@12170000
> 2. i2c-9/i2c@38
>
> The first node represents the actual SATA PHY device with phy-cells.
> The second represents additional I2C interface, needed by the driver
> to communicate with the SATA PHY device.  It is not a PHY-provider in
> the terms of dtschema so rename it to silence dtbs_check warning:
>
>    arch/arm/boot/dts/exynos5250-arndale.dt.yaml: sata-phy@38: '#phy-cells' is a required property
>      From schema: lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>   arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index f2bcce167b2d..3c401c82905c 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -544,7 +544,7 @@
>   	samsung,i2c-max-bus-freq = <40000>;
>   	samsung,i2c-slave-addr = <0x38>;
>   
> -	sata_phy_i2c: sata-phy@38 {
> +	sata_phy_i2c: sata-phy-i2c@38 {
>   		compatible = "samsung,exynos-sataphy-i2c";
>   		reg = <0x38>;
>   	};

I'm not against the rename, but frankly, the above node and all i2c 
parameters should be moved to exynos5250.dtsi. This is a SoC internal 
things (the same way as hdmiphy in exynos4.dtsi), so the board dts 
should only contain information like status = "enabled" for i2c_8 and 
hdmi_i2c_phy nodes. No need to duplicate it here and in smdk5250.dts.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale
  2020-09-01  8:13   ` Marek Szyprowski
@ 2020-09-01  8:17     ` Krzysztof Kozlowski
  2020-09-01  8:19       ` Krzysztof Kozlowski
  0 siblings, 1 reply; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  8:17 UTC (permalink / raw)
  To: Marek Szyprowski
  Cc: Rob Herring, Kukjin Kim, devicetree, linux-arm-kernel,
	linux-samsung-soc, linux-kernel, Bartlomiej Zolnierkiewicz,
	Sylwester Nawrocki

On Tue, 1 Sep 2020 at 10:13, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>
> Hi Krzysztof,
>
> On 01.09.2020 09:54, Krzysztof Kozlowski wrote:
> > The SATA PHY in Exynos5250 SoCs has two interfaces and two device nodes:
> > 1. sata-phy@12170000
> > 2. i2c-9/i2c@38
> >
> > The first node represents the actual SATA PHY device with phy-cells.
> > The second represents additional I2C interface, needed by the driver
> > to communicate with the SATA PHY device.  It is not a PHY-provider in
> > the terms of dtschema so rename it to silence dtbs_check warning:
> >
> >    arch/arm/boot/dts/exynos5250-arndale.dt.yaml: sata-phy@38: '#phy-cells' is a required property
> >      From schema: lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> >   arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> > index f2bcce167b2d..3c401c82905c 100644
> > --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> > +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> > @@ -544,7 +544,7 @@
> >       samsung,i2c-max-bus-freq = <40000>;
> >       samsung,i2c-slave-addr = <0x38>;
> >
> > -     sata_phy_i2c: sata-phy@38 {
> > +     sata_phy_i2c: sata-phy-i2c@38 {
> >               compatible = "samsung,exynos-sataphy-i2c";
> >               reg = <0x38>;
> >       };
>
> I'm not against the rename, but frankly, the above node and all i2c
> parameters should be moved to exynos5250.dtsi. This is a SoC internal
> things (the same way as hdmiphy in exynos4.dtsi), so the board dts
> should only contain information like status = "enabled" for i2c_8 and
> hdmi_i2c_phy nodes. No need to duplicate it here and in smdk5250.dts.

Good point, the I2C bus used here is an internal part of SoC.

I will squash these two changes into a new one. Thanks for the review!

Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale
  2020-09-01  8:17     ` Krzysztof Kozlowski
@ 2020-09-01  8:19       ` Krzysztof Kozlowski
  2020-09-01  8:36         ` Marek Szyprowski
  0 siblings, 1 reply; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  8:19 UTC (permalink / raw)
  To: Marek Szyprowski
  Cc: Rob Herring, Kukjin Kim, devicetree, linux-arm-kernel,
	linux-samsung-soc, linux-kernel, Bartlomiej Zolnierkiewicz,
	Sylwester Nawrocki

On Tue, 1 Sep 2020 at 10:17, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On Tue, 1 Sep 2020 at 10:13, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
> >
> > Hi Krzysztof,
> >
> > On 01.09.2020 09:54, Krzysztof Kozlowski wrote:
> > > The SATA PHY in Exynos5250 SoCs has two interfaces and two device nodes:
> > > 1. sata-phy@12170000
> > > 2. i2c-9/i2c@38
> > >
> > > The first node represents the actual SATA PHY device with phy-cells.
> > > The second represents additional I2C interface, needed by the driver
> > > to communicate with the SATA PHY device.  It is not a PHY-provider in
> > > the terms of dtschema so rename it to silence dtbs_check warning:
> > >
> > >    arch/arm/boot/dts/exynos5250-arndale.dt.yaml: sata-phy@38: '#phy-cells' is a required property
> > >      From schema: lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml
> > >
> > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > ---
> > >   arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
> > >   1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> > > index f2bcce167b2d..3c401c82905c 100644
> > > --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> > > +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> > > @@ -544,7 +544,7 @@
> > >       samsung,i2c-max-bus-freq = <40000>;
> > >       samsung,i2c-slave-addr = <0x38>;
> > >
> > > -     sata_phy_i2c: sata-phy@38 {
> > > +     sata_phy_i2c: sata-phy-i2c@38 {
> > >               compatible = "samsung,exynos-sataphy-i2c";
> > >               reg = <0x38>;
> > >       };
> >
> > I'm not against the rename, but frankly, the above node and all i2c
> > parameters should be moved to exynos5250.dtsi. This is a SoC internal
> > things (the same way as hdmiphy in exynos4.dtsi), so the board dts
> > should only contain information like status = "enabled" for i2c_8 and
> > hdmi_i2c_phy nodes. No need to duplicate it here and in smdk5250.dts.
>
> Good point, the I2C bus used here is an internal part of SoC.
>
> I will squash these two changes into a new one. Thanks for the review!

While at it, I wonder about the samsung,i2c-slave-addr property. Is it
really needed? Are there multiple masters on this bus?

Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale
  2020-09-01  8:19       ` Krzysztof Kozlowski
@ 2020-09-01  8:36         ` Marek Szyprowski
  2020-09-01  8:42           ` Krzysztof Kozlowski
  0 siblings, 1 reply; 22+ messages in thread
From: Marek Szyprowski @ 2020-09-01  8:36 UTC (permalink / raw)
  To: Krzysztof Kozlowski
  Cc: Rob Herring, Kukjin Kim, devicetree, linux-arm-kernel,
	linux-samsung-soc, linux-kernel, Bartlomiej Zolnierkiewicz,
	Sylwester Nawrocki

On 01.09.2020 10:19, Krzysztof Kozlowski wrote:
> On Tue, 1 Sep 2020 at 10:17, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>> On Tue, 1 Sep 2020 at 10:13, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>>> On 01.09.2020 09:54, Krzysztof Kozlowski wrote:
>>>> The SATA PHY in Exynos5250 SoCs has two interfaces and two device nodes:
>>>> 1. sata-phy@12170000
>>>> 2. i2c-9/i2c@38
>>>>
>>>> The first node represents the actual SATA PHY device with phy-cells.
>>>> The second represents additional I2C interface, needed by the driver
>>>> to communicate with the SATA PHY device.  It is not a PHY-provider in
>>>> the terms of dtschema so rename it to silence dtbs_check warning:
>>>>
>>>>     arch/arm/boot/dts/exynos5250-arndale.dt.yaml: sata-phy@38: '#phy-cells' is a required property
>>>>       From schema: lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>>>> ---
>>>>    arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
>>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
>>>> index f2bcce167b2d..3c401c82905c 100644
>>>> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
>>>> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
>>>> @@ -544,7 +544,7 @@
>>>>        samsung,i2c-max-bus-freq = <40000>;
>>>>        samsung,i2c-slave-addr = <0x38>;
>>>>
>>>> -     sata_phy_i2c: sata-phy@38 {
>>>> +     sata_phy_i2c: sata-phy-i2c@38 {
>>>>                compatible = "samsung,exynos-sataphy-i2c";
>>>>                reg = <0x38>;
>>>>        };
>>> I'm not against the rename, but frankly, the above node and all i2c
>>> parameters should be moved to exynos5250.dtsi. This is a SoC internal
>>> things (the same way as hdmiphy in exynos4.dtsi), so the board dts
>>> should only contain information like status = "enabled" for i2c_8 and
>>> hdmi_i2c_phy nodes. No need to duplicate it here and in smdk5250.dts.
>> Good point, the I2C bus used here is an internal part of SoC.
>>
>> I will squash these two changes into a new one. Thanks for the review!
> While at it, I wonder about the samsung,i2c-slave-addr property. Is it
> really needed? Are there multiple masters on this bus?

This might be some cargo-cult, probably copied from HDMI DDC (I'm not 
sure if it is needed there). I've removed it and SATA still works fine 
on Exynos5250 Arndale board.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale
  2020-09-01  8:36         ` Marek Szyprowski
@ 2020-09-01  8:42           ` Krzysztof Kozlowski
  0 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-01  8:42 UTC (permalink / raw)
  To: Marek Szyprowski
  Cc: Rob Herring, Kukjin Kim, devicetree, linux-arm-kernel,
	linux-samsung-soc, linux-kernel, Bartlomiej Zolnierkiewicz,
	Sylwester Nawrocki

On Tue, 1 Sep 2020 at 10:36, Marek Szyprowski <m.szyprowski@samsung.com> wrote:

> >>> I'm not against the rename, but frankly, the above node and all i2c
> >>> parameters should be moved to exynos5250.dtsi. This is a SoC internal
> >>> things (the same way as hdmiphy in exynos4.dtsi), so the board dts
> >>> should only contain information like status = "enabled" for i2c_8 and
> >>> hdmi_i2c_phy nodes. No need to duplicate it here and in smdk5250.dts.
> >> Good point, the I2C bus used here is an internal part of SoC.
> >>
> >> I will squash these two changes into a new one. Thanks for the review!
> > While at it, I wonder about the samsung,i2c-slave-addr property. Is it
> > really needed? Are there multiple masters on this bus?
>
> This might be some cargo-cult, probably copied from HDMI DDC (I'm not
> sure if it is needed there). I've removed it and SATA still works fine
> on Exynos5250 Arndale board.

Cool, thanks!

Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 01/13] ARM: dts: exynos: Correct compatible for Exynos5 GIC
  2020-09-01  7:54 ` [PATCH 01/13] ARM: dts: exynos: Correct compatible for Exynos5 GIC Krzysztof Kozlowski
@ 2020-09-03 20:48   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-03 20:48 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, devicetree, linux-arm-kernel,
	linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

On Tue, Sep 01, 2020 at 09:54:05AM +0200, Krzysztof Kozlowski wrote:
> Exynos5250 and Exynso54xx SoCs have ARM GIC 400.  Correct the
> compatibles to match dtschema and fix the dtbs_check warnings like:
> 
>   arch/arm/boot/dts/exynos5420-peach-pit.dt.yaml: interrupt-controller@10481000:
>     compatible: ['arm,gic-400', 'arm,cortex-a15-gic', 'arm,cortex-a9-gic']
>     is not valid under any of the given schemas
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  arch/arm/boot/dts/exynos5.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Applied 1-10.

Best regards,
Krzysztof


^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 13/13] ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420
  2020-09-01  7:54 ` [PATCH 13/13] ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420 Krzysztof Kozlowski
@ 2020-09-04  8:59   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 22+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-04  8:59 UTC (permalink / raw)
  To: Rob Herring, Kukjin Kim, devicetree, linux-arm-kernel,
	linux-samsung-soc, linux-kernel
  Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki

On Tue, Sep 01, 2020 at 09:54:17AM +0200, Krzysztof Kozlowski wrote:
> Use the 32 kHz clock from S2MPS11 PMIC in the S3C RTC node. Except
> making the S3C RTC working, this also fixes dtbs_check warnings:
> 
>   arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clocks: [[2, 317]] is too short
>   arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  arch/arm/boot/dts/exynos5420-smdk5420.dts | 3 +++

Applied.

Best regards,
Krzysztof


^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, back to index

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-01  7:54 [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 01/13] ARM: dts: exynos: Correct compatible for Exynos5 GIC Krzysztof Kozlowski
2020-09-03 20:48   ` Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 02/13] ARM: dts: exynos: Correct compatible for Exynos5260 GIC Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 03/13] ARM: dts: exynos: Remove unneeded address/size cells in " Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 04/13] ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410 Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 05/13] ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 Arndale Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 06/13] ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5 Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 07/13] ARM: dts: exynos: Override thermal by label in Exynos5250 Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 08/13] ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250 Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 09/13] ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 10/13] ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning " Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 Arndale Krzysztof Kozlowski
2020-09-01  8:13   ` Marek Szyprowski
2020-09-01  8:17     ` Krzysztof Kozlowski
2020-09-01  8:19       ` Krzysztof Kozlowski
2020-09-01  8:36         ` Marek Szyprowski
2020-09-01  8:42           ` Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 12/13] ARM: dts: exynos: Silence SATA PHY warning in SMDK5250 Krzysztof Kozlowski
2020-09-01  7:54 ` [PATCH 13/13] ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420 Krzysztof Kozlowski
2020-09-04  8:59   ` Krzysztof Kozlowski
2020-09-01  8:02 ` [PATCH 00/13] ARM: dts: exynos: dtschema cleanups for Exynos5 Krzysztof Kozlowski

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git
	git clone --mirror https://lore.kernel.org/linux-devicetree/1 linux-devicetree/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git