devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lars Povlsen <lars.povlsen@microchip.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>,
	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
	<devicetree@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v2 1/3] dt-bindings: pinctrl: Add bindings for pinctrl-mchp-sgpio driver
Date: Thu, 3 Sep 2020 15:35:26 +0200	[thread overview]
Message-ID: <20200903133528.8595-2-lars.povlsen@microchip.com> (raw)
In-Reply-To: <20200903133528.8595-1-lars.povlsen@microchip.com>

This adds DT bindings for the Microsemi/Microchip SGPIO controller,
bindings microchip,sparx5-sgpio, mscc,ocelot-sgpio and
mscc,luton-sgpio.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 .../pinctrl/microchip,sparx5-sgpio.yaml       | 88 +++++++++++++++++++
 include/dt-bindings/gpio/mchp-sgpio.h         | 19 ++++
 2 files changed, 107 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
 create mode 100644 include/dt-bindings/gpio/mchp-sgpio.h

diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
new file mode 100644
index 000000000000..25a50ba9e893
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/microchip,sparx5-sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi/Microchip Serial GPIO controller
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  By using a serial interface, the SIO controller significantly extend
+  the number of available GPIOs with a minimum number of additional
+  pins on the device. The primary purpose of the SIO controllers is to
+  connect control signals from SFP modules and to act as an LED
+  controller.
+
+properties:
+  $nodename:
+    pattern: "gpio"
+
+  compatible:
+    enum:
+      - microchip,sparx5-sgpio
+      - mscc,ocelot-sgpio
+      - mscc,luton-sgpio
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: GPIO consumers must specify four arguments, first the
+      port number, then the bit number, then a input/output flag and
+      finally the GPIO flags (from include/dt-bindings/gpio/gpio.h).
+      The dt-bindings/gpio/mchp-sgpio.h file define manifest constants
+      PIN_INPUT and PIN_OUTPUT.
+    const: 4
+
+  gpio-ranges:
+    maxItems: 1
+
+  microchip,sgpio-port-ranges:
+    description: This is a sequence of tuples, defining intervals of
+      enabled ports in the serial input stream. The enabled ports must
+      match the hardware configuration in order for signals to be
+      properly written/read to/from the controller holding
+      registers. Being tuples, then number of arguments must be
+      even. The tuples mast be ordered (low, high) and are
+      inclusive. Arguments must be between 0 and 31.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 64
+
+  microchip,sgpio-frequency:
+    description: The sgpio controller frequency (Hz). This dictates
+      the serial bitstream speed, which again affects the latency in
+      getting control signals back and forth between external shift
+      registers. The speed must be no larger than half the system
+      clock, and larger than zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 12500000
+
+required:
+  - compatible
+  - clocks
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - microchip,sgpio-port-ranges
+
+examples:
+  - |
+    sgpio2: gpio@1101036c {
+        compatible = "microchip,sparx5-sgpio";
+        pinctrl-0 = <&sgpio0_pins>;
+        pinctrl-names = "default";
+        reg = <0x1101036c 0x100>;
+        clocks = <&sys_clk>;
+        gpio-controller;
+        gpio-ranges = <&sgpio0 0 0 192>;
+        #gpio-cells = <4>;
+        microchip,sgpio-port-ranges = <0 0 16 18 28 31>;
+        microchip,sgpio-frequency = <25000000>;
+    };
diff --git a/include/dt-bindings/gpio/mchp-sgpio.h b/include/dt-bindings/gpio/mchp-sgpio.h
new file mode 100644
index 000000000000..61b8aa75d870
--- /dev/null
+++ b/include/dt-bindings/gpio/mchp-sgpio.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * This header provides constants for binding the Microchip SGPIO
+ * driver.
+ *
+ */
+
+#ifndef _DT_BINDINGS_GPIO_MCHP_SGPIO_H
+#define _DT_BINDINGS_GPIO_MCHP_SGPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+/* mchp-sgpio specific pin type defines */
+#undef PIN_OUTPUT
+#undef PIN_INPUT
+#define PIN_OUTPUT	0
+#define PIN_INPUT	1
+
+#endif
--
2.27.0

  reply	other threads:[~2020-09-03 15:02 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-03 13:35 [PATCH v2 0/3] pinctrl: Adding support for Microchip/Microsemi serial GPIO controller Lars Povlsen
2020-09-03 13:35 ` Lars Povlsen [this message]
2020-09-12 10:50   ` [PATCH v2 1/3] dt-bindings: pinctrl: Add bindings for pinctrl-mchp-sgpio driver Linus Walleij
2020-09-13 19:11     ` Lars Povlsen
2020-09-30  9:21       ` Linus Walleij
2020-10-05  8:21         ` Lars Povlsen
2020-09-03 13:35 ` [PATCH v2 2/3] pinctrl: pinctrl-mchp-sgpio: Add pinctrl driver for Microsemi Serial GPIO Lars Povlsen
2020-09-12 11:11   ` Linus Walleij
2020-09-13 19:28     ` Lars Povlsen
2020-09-03 13:35 ` [PATCH v2 3/3] arm64: dts: sparx5: Add SGPIO devices Lars Povlsen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200903133528.8595-2-lars.povlsen@microchip.com \
    --to=lars.povlsen@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v2 1/3] dt-bindings: pinctrl: Add bindings for pinctrl-mchp-sgpio driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).