From: Michael Walle <michael@walle.cc>
To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Jean Delvare" <jdelvare@suse.com>,
"Guenter Roeck" <linux@roeck-us.net>,
"Lee Jones" <lee.jones@linaro.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Wim Van Sebroeck" <wim@linux-watchdog.org>,
"Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Jason Cooper" <jason@lakedaemon.net>,
"Marc Zyngier" <maz@kernel.org>,
"Mark Brown" <broonie@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Catalin Marinas" <catalin.marinas@arm.com>,
"Will Deacon" <will@kernel.org>, "Pavel Machek" <pavel@ucw.cz>,
"Michael Walle" <michael@walle.cc>
Subject: [PATCH v9 09/13] arm64: dts: freescale: sl28: enable sl28cpld
Date: Mon, 7 Sep 2020 23:37:58 +0200 [thread overview]
Message-ID: <20200907213802.26745-10-michael@walle.cc> (raw)
In-Reply-To: <20200907213802.26745-1-michael@walle.cc>
Add the board management controller node.
Signed-off-by: Michael Walle <michael@walle.cc>
---
Changes since v8:
- none
Changes since v7:
- none
Changes since v6:
- renamed "sl28cpld-r1" to "sl28cpld"
- moved "reg" and "compatible" properties to the top of a node
Changes since v5:
- none
Changes since v4:
- none
Changes since v3:
- see cover letter
.../freescale/fsl-ls1028a-kontron-sl28.dts | 102 ++++++++++++++++++
1 file changed, 102 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 360b3a168c10..9f9834eafe65 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "fsl-ls1028a.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Kontron SMARC-sAL28";
@@ -170,6 +171,107 @@
reg = <0x32>;
};
+ sl28cpld@4a {
+ compatible = "kontron,sl28cpld";
+ reg = <0x4a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ watchdog@4 {
+ compatible = "kontron,sl28cpld-wdt";
+ reg = <0x4>;
+ kontron,assert-wdt-timeout-pin;
+ };
+
+ hwmon@b {
+ compatible = "kontron,sl28cpld-fan";
+ reg = <0xb>;
+ };
+
+ sl28cpld_pwm0: pwm@c {
+ compatible = "kontron,sl28cpld-pwm";
+ reg = <0xc>;
+ #pwm-cells = <2>;
+ };
+
+ sl28cpld_pwm1: pwm@e {
+ compatible = "kontron,sl28cpld-pwm";
+ reg = <0xe>;
+ #pwm-cells = <2>;
+ };
+
+ sl28cpld_gpio0: gpio@10 {
+ compatible = "kontron,sl28cpld-gpio";
+ reg = <0x10>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N",
+ "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N",
+ "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT",
+ "GPIO6_TACHIN", "GPIO7";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sl28cpld_gpio1: gpio@15 {
+ compatible = "kontron,sl28cpld-gpio";
+ reg = <0x15>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "GPIO8", "GPIO9", "GPIO10", "GPIO11",
+ "", "", "", "";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sl28cpld_gpio2: gpio@1a {
+ compatible = "kontron,sl28cpld-gpo";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "LCD0 voltage enable",
+ "LCD0 backlight enable",
+ "eMMC reset", "LVDS bridge reset",
+ "LVDS bridge power-down",
+ "SDIO power enable",
+ "", "";
+ };
+
+ sl28cpld_gpio3: gpio@1b {
+ compatible = "kontron,sl28cpld-gpi";
+ reg = <0x1b>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "Power button", "Force recovery", "Sleep",
+ "Battery low", "Lid state", "Charging",
+ "Charger present", "";
+ };
+
+ sl28cpld_intc: interrupt-controller@1c {
+ compatible = "kontron,sl28cpld-intc";
+ reg = <0x1c>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
--
2.20.1
next prev parent reply other threads:[~2020-09-07 21:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-07 21:37 [PATCH v9 00/13] Add support for Kontron sl28cpld Michael Walle
2020-09-07 21:37 ` [PATCH v9 01/13] mfd: add simple regmap based I2C driver Michael Walle
2020-09-07 21:37 ` [PATCH v9 02/13] dt-bindings: mfd: Add bindings for sl28cpld Michael Walle
2020-09-07 21:37 ` [PATCH v9 03/13] mfd: simple-mfd-i2c: add sl28cpld support Michael Walle
2020-09-07 21:37 ` [PATCH v9 04/13] irqchip: add sl28cpld interrupt controller support Michael Walle
2020-09-07 21:37 ` [PATCH v9 05/13] watchdog: add support for sl28cpld watchdog Michael Walle
2020-09-07 21:37 ` [PATCH v9 06/13] pwm: add support for sl28cpld PWM controller Michael Walle
2020-09-08 8:12 ` Uwe Kleine-König
2020-09-07 21:37 ` [PATCH v9 07/13] gpio: add support for the sl28cpld GPIO controller Michael Walle
2020-09-07 21:37 ` [PATCH v9 08/13] hwmon: add support for the sl28cpld hardware monitoring controller Michael Walle
2020-09-07 21:37 ` Michael Walle [this message]
2020-09-07 21:37 ` [PATCH v9 10/13] arm64: dts: freescale: sl28: map GPIOs to input events Michael Walle
2020-09-07 21:38 ` [PATCH v9 11/13] arm64: dts: freescale: sl28: enable LED support Michael Walle
2020-09-09 9:25 ` Pavel Machek
2020-10-04 9:58 ` Pavel Machek
2020-09-07 21:38 ` [PATCH v9 12/13] arm64: dts: freescale: sl28: enable fan support Michael Walle
2020-09-07 21:38 ` [PATCH v9 13/13] arm64: defconfig: enable the sl28cpld board management controller Michael Walle
2020-09-08 7:42 ` [PATCH v9 00/13] Add support for Kontron sl28cpld Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200907213802.26745-10-michael@walle.cc \
--to=michael@walle.cc \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jason@lakedaemon.net \
--cc=jdelvare@suse.com \
--cc=lee.jones@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=maz@kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=will@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).