From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [PATCH] ARM: dts: aspeed-g6: Add sgpiom/sgpios node
Date: Wed, 30 Sep 2020 13:11:13 +0800 [thread overview]
Message-ID: <20200930051113.32465-1-billy_tsai@aspeedtech.com> (raw)
This commit add two sgpiom and two sgpios node into aspeed-g6.dtsi
and change the register range of gpio0 to fix the hardware design.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 51 +++++++++++++++++++++++++++++++-
1 file changed, 50 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 97ca743363d7..00237daec2a1 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -357,7 +357,7 @@
#gpio-cells = <2>;
gpio-controller;
compatible = "aspeed,ast2600-gpio";
- reg = <0x1e780000 0x800>;
+ reg = <0x1e780000 0x500>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 208>;
ngpios = <208>;
@@ -365,6 +365,55 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+ sgpiom0: sgpiom@1e780500 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2600-sgpiom";
+ reg = <0x1e780500 0x100>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ ngpios = <128>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ interrupt-controller;
+ bus-frequency = <12000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgpm1_default>;
+ status = "disabled";
+ };
+
+ sgpiom1: sgpiom@1e780600 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2600-sgpiom";
+ reg = <0x1e780600 0x100>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ ngpios = <80>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ interrupt-controller;
+ bus-frequency = <12000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgpm2_default>;
+ status = "disabled";
+ };
+
+ sgpios0: sgpios@1e780700 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2600-sgpios";
+ reg = <0x1e780700 0x40>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ };
+
+ sgpios1: sgpios@1e780740 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2600-sgpios";
+ reg = <0x1e780740 0x40>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ };
gpio1: gpio@1e780800 {
#gpio-cells = <2>;
--
2.17.1
next reply other threads:[~2020-09-30 5:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-30 5:11 Billy Tsai [this message]
2020-09-30 9:06 ` [RESEND PATCH] ARM: dts: aspeed-g6: Fix gpio memory region Billy Tsai
2020-10-01 0:12 ` Andrew Jeffery
2020-10-01 0:32 ` Andrew Jeffery
2020-10-01 1:11 ` Ryan Chen
2020-10-01 0:36 ` [PATCH] ARM: dts: aspeed-g6: Add sgpiom/sgpios node Andrew Jeffery
2020-10-05 1:55 ` Billy Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200930051113.32465-1-billy_tsai@aspeedtech.com \
--to=billy_tsai@aspeedtech.com \
--cc=BMC-SW@aspeedtech.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).