Linux-Devicetree Archive on
 help / color / Atom feed
From: Stephen Boyd <>
To: Jonathan Cameron <>
	Daniel Campello <>,
	Lars-Peter Clausen <>,
	Peter Meerwald-Stadler <>,
	Douglas Anderson <>,
	Gwendal Grignou <>,
	Evan Green <>,
	Rob Herring <>,
Subject: [PATCH v2 0/6] iio: sx9310: Support setting various settings
Date: Wed, 30 Sep 2020 00:57:22 -0700
Message-ID: <> (raw)

I need to configure various settings such as thresholds, gain factors,
etc. on this device. Some settings matter at boot, while others can wait
for userspace to configure things. This patch series adds support to
set these various bits in the registers of this device.

Changes from v1 (
 - A bunch more patches for userspace settings
 - Removed body thresholds as they're probably not used
 - Removed compensate common as it probably doesn't matter
 - Moved thresholds, gain factor, hysteresis, debounce to userspace

Stephen Boyd (6):
  iio: sx9310: Support hardware gain factor
  iio: sx9310: Support setting proximity thresholds
  iio: sx9310: Support setting hysteresis values
  iio: sx9310: Support setting debounce values
  dt-bindings: iio: sx9310: Add various settings as DT properties
  iio: sx9310: Set various settings from DT

 .../iio/proximity/semtech,sx9310.yaml         |  61 ++
 drivers/iio/proximity/sx9310.c                | 524 +++++++++++++++++-
 2 files changed, 579 insertions(+), 6 deletions(-)

Cc: Daniel Campello <>
Cc: Lars-Peter Clausen <>
Cc: Peter Meerwald-Stadler <>
Cc: Douglas Anderson <>
Cc: Gwendal Grignou <>
Cc: Evan Green <>
Cc: Rob Herring <>
Cc: <>

base-commit: 1bebdcb928eba880f3a119bacb8149216206958a
Sent by a computer, using git, on the internet

             reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-30  7:57 Stephen Boyd [this message]
2020-09-30  7:57 ` [PATCH v2 5/6] dt-bindings: iio: sx9310: Add various settings as DT properties Stephen Boyd
2020-10-06 19:11   ` Rob Herring
2020-09-30  7:57 ` [PATCH v2 6/6] iio: sx9310: Set various settings from DT Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on

Archives are clonable:
	git clone --mirror linux-devicetree/git/0.git
	git clone --mirror linux-devicetree/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ \
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone