From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <nm@ti.com>, <t-kristo@ti.com>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <robh+dt@kernel.org>
Subject: [PATCH] arm64: dts: ti: k3-j7200-main: Add McASP nodes
Date: Mon, 5 Oct 2020 10:48:50 +0300 [thread overview]
Message-ID: <20201005074850.11247-1-peter.ujfalusi@ti.com> (raw)
Add the nodes for McASP 0-2 and keep them disabled because several
required properties are not present as they are board specific.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 57 +++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 72d6496e88dd..cc6c2a81887a 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -446,4 +446,61 @@ usb0: usb@6000000 {
dr_mode = "otg";
};
};
+
+ mcasp0: mcasp@02b00000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b00000 0x0 0x2000>,
+ <0x0 0x02b08000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 174 40>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@02b10000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b10000 0x0 0x2000>,
+ <0x0 0x02b18000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 175 40>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@02b20000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b20000 0x0 0x2000>,
+ <0x0 0x02b28000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 176 40>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
};
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next reply other threads:[~2020-10-05 7:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-05 7:48 Peter Ujfalusi [this message]
2020-10-05 11:58 ` [PATCH] arm64: dts: ti: k3-j7200-main: Add McASP nodes Nishanth Menon
2020-10-05 12:02 ` Peter Ujfalusi
2020-10-05 12:08 ` Nishanth Menon
2020-10-07 10:38 ` Peter Ujfalusi
2020-10-26 14:50 ` Nishanth Menon
2020-10-27 13:07 ` Tony Lindgren
2020-10-27 13:19 ` Nishanth Menon
2020-10-27 13:26 ` Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201005074850.11247-1-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).