Re: [PATCH v2 2/2] dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml

[Rob Herring <robh@kernel.org>]

On Fri, Oct 16, 2020 at 09:33:15AM +0200, Oleksij Rempel wrote:
> In order to automate the verification of DT nodes convert
> fsl-flexcan.txt to fsl,flexcan.yaml
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  .../bindings/net/can/fsl,flexcan.yaml         | 137 ++++++++++++++++++
>  .../bindings/net/can/fsl-flexcan.txt          |  57 --------
>  2 files changed, 137 insertions(+), 57 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> new file mode 100644
> index 000000000000..c5c72bcd47c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> @@ -0,0 +1,137 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title:
> +  Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
> +
> +maintainers:
> +  - Marc Kleine-Budde <mkl@pengutronix.de>
> +
> +allOf:
> +  - $ref: can-controller.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - fsl,imx8qm-flexcan
> +          - fsl,imx8mp-flexcan
> +          - fsl,imx6q-flexcan
> +          - fsl,imx53-flexcan
> +          - fsl,imx35-flexcan
> +          - fsl,imx28-flexcan
> +          - fsl,imx25-flexcan
> +          - fsl,p1010-flexcan
> +          - fsl,vf610-flexcan
> +          - fsl,ls1021ar2-flexcan
> +          - fsl,lx2160ar1-flexcan
> +      - items:
> +          - enum:
> +              - fsl,imx7d-flexcan
> +              - fsl,imx6ul-flexcan
> +              - fsl,imx6sx-flexcan
> +          - const: fsl,imx6q-flexcan
> +      - items:
> +          - enum:
> +              - fsl,ls1028ar1-flexcan
> +          - const: fsl,lx2160ar1-flexcan
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: ipg
> +      - const: per
> +
> +  clock-frequency:
> +    description: |
> +      The oscillator frequency driving the flexcan device, filled in by the
> +      boot loader. This property should only be used the used operating system
> +      doesn't support the clocks and clock-names property.
> +    $ref: /schemas/types.yaml#/definitions/uint32

Standard prop, already has a type.

> +
> +  xceiver-supply:
> +    description: Regulator that powers the CAN transceiver.
> +    maxItems: 1

*-supply is always a single item. Drop maxItems.

> +
> +  big-endian:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: |
> +      This means the registers of FlexCAN controller are big endian. This is
> +      optional property.i.e. if this property is not present in device tree
> +      node then controller is assumed to be little endian. If this property is
> +      present then controller is assumed to be big endian.
> +
> +  fsl,stop-mode:
> +    description: |
> +      Register bits of stop mode control.
> +
> +      The format should be as follows:
> +      <gpr req_gpr req_bit>
> +      gpr is the phandle to general purpose register node.
> +      req_gpr is the gpr register offset of CAN stop request.
> +      req_bit is the bit offset of CAN stop request.
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      - description: The 'gpr' is the phandle to general purpose register node.
> +      - description: The 'req_gpr' is the gpr register offset of CAN stop request.
> +        maximum: 0xff
> +      - description: The 'req_bit' is the bit offset of CAN stop request.
> +        maximum: 0x1f
> +
> +  fsl,clk-source:
> +    description: |
> +      Select the clock source to the CAN Protocol Engine (PE). It's SoC
> +      implementation dependent. Refer to RM for detailed definition. If this
> +      property is not set in device tree node then driver selects clock source 1
> +      by default.
> +      0: clock source 0 (oscillator clock)
> +      1: clock source 1 (peripheral clock)
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 1
> +    minimum: 0
> +    maximum: 1
> +
> +  wakeup-source:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      Enable CAN remote wakeup.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    can@1c000 {
> +        compatible = "fsl,p1010-flexcan";
> +        reg = <0x1c000 0x1000>;
> +        interrupts = <48 0x2>;
> +        interrupt-parent = <&mpic>;
> +        clock-frequency = <200000000>;
> +        fsl,clk-source = <0>;
> +    };
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    can@2090000 {
> +        compatible = "fsl,imx6q-flexcan";
> +        reg = <0x02090000 0x4000>;
> +        interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&clks 1>, <&clks 2>;
> +        clock-names = "ipg", "per";
> +        fsl,stop-mode = <&gpr 0x34 28>;
> +    };
> diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> deleted file mode 100644
> index e10b6eb955e1..000000000000
> --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
> -
> -Required properties:
> -
> -- compatible : Should be "fsl,<processor>-flexcan"
> -
> -  where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
> -  vf610, ls1021ar2, lx2160ar1, ls1028ar1.
> -
> -  The ls1028ar1 must be followed by lx2160ar1, e.g.
> -   - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
> -
> -  An implementation should also claim any of the following compatibles
> -  that it is fully backwards compatible with:
> -
> -  - fsl,p1010-flexcan
> -
> -- reg : Offset and length of the register set for this device
> -- interrupts : Interrupt tuple for this device
> -
> -Optional properties:
> -
> -- clock-frequency : The oscillator frequency driving the flexcan device
> -
> -- xceiver-supply: Regulator that powers the CAN transceiver
> -
> -- big-endian: This means the registers of FlexCAN controller are big endian.
> -              This is optional property.i.e. if this property is not present in
> -              device tree node then controller is assumed to be little endian.
> -              if this property is present then controller is assumed to be big
> -              endian.
> -
> -- fsl,stop-mode: register bits of stop mode control, the format is
> -		 <&gpr req_gpr req_bit>.
> -		 gpr is the phandle to general purpose register node.
> -		 req_gpr is the gpr register offset of CAN stop request.
> -		 req_bit is the bit offset of CAN stop request.
> -
> -- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE).
> -		  It's SoC Implementation dependent. Refer to RM for detailed
> -		  definition. If this property is not set in device tree node
> -		  then driver selects clock source 1 by default.
> -		  0: clock source 0 (oscillator clock)
> -		  1: clock source 1 (peripheral clock)
> -
> -- wakeup-source: enable CAN remote wakeup
> -
> -Example:
> -
> -	can@1c000 {
> -		compatible = "fsl,p1010-flexcan";
> -		reg = <0x1c000 0x1000>;
> -		interrupts = <48 0x2>;
> -		interrupt-parent = <&mpic>;
> -		clock-frequency = <200000000>; // filled in by bootloader
> -		fsl,clk-source = <0>; // select clock source 0 for PE
> -	};
> -- 
> 2.28.0
>