From: Rob Herring <robh@kernel.org>
To: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
lee.jones@linaro.org, pavel@ucw.cz, dmurphy@ti.com,
jdelvare@suse.com, linux@roeck-us.net, marek.behun@nic.cz,
luka.perkov@sartura.hr, andy.shevchenko@gmail.com,
robert.marko@sartura.hr
Subject: Re: [PATCH v6 1/6] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings
Date: Tue, 20 Oct 2020 10:30:16 -0500 [thread overview]
Message-ID: <20201020153016.GC866676@bogus> (raw)
In-Reply-To: <20201019221859.56680-2-luka.kovacic@sartura.hr>
On Tue, Oct 20, 2020 at 12:18:54AM +0200, Luka Kovacic wrote:
> Add the iEi WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED
> drivers. A new vendor prefix is also added accordingly for
> IEI Integration Corp.
>
> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
> Cc: Luka Perkov <luka.perkov@sartura.hr>
> Cc: Robert Marko <robert.marko@sartura.hr>
> ---
> .../hwmon/iei,wt61p803-puzzle-hwmon.yaml | 41 ++++++++++
> .../leds/iei,wt61p803-puzzle-leds.yaml | 45 ++++++++++
> .../bindings/mfd/iei,wt61p803-puzzle.yaml | 82 +++++++++++++++++++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> 4 files changed, 170 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
> create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
> create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
> new file mode 100644
> index 000000000000..37f0030df237
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: iEi WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp.
> +
> +maintainers:
> + - Luka Kovacic <luka.kovacic@sartura.hr>
> +
> +description: |
> + This module is a part of the iEi WT61P803 PUZZLE MFD device. For more details
> + see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
> +
> + The HWMON module is a sub-node of the MCU node in the Device Tree.
> +
> +properties:
> + compatible:
> + const: iei,wt61p803-puzzle-hwmon
> +
> +patternProperties:
> + "^fan-group@[0-1]$":
> + type: object
> + properties:
> + reg:
> + minimum: 0
> + maximum: 1
> + description:
> + Fan group ID
Blank line between properties.
> + cooling-levels:
> + maxItems: 255
> + description:
> + Cooling levels for the fans (PWM value mapping)
> + description: |
> + Properties for each fan group.
> + required:
> + - reg
> +
> +required:
> + - compatible
additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
> new file mode 100644
> index 000000000000..0d353e5803bf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: iEi WT61P803 PUZZLE MCU LED module from IEI Integration Corp.
> +
> +maintainers:
> + - Luka Kovacic <luka.kovacic@sartura.hr>
> +
> +description: |
> + This module is a part of the iEi WT61P803 PUZZLE MFD device. For more details
> + see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
> +
> + The LED module is a sub-node of the MCU node in the Device Tree.
> +
> +properties:
> + compatible:
> + const: iei,wt61p803-puzzle-leds
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> +patternProperties:
> + "^led@0$":
Fixed string, not a pattern. Do you plan to add more? Define the schema
to what the h/w supports, not current driver support.
> + type: object
> + $ref: common.yaml
> + description: |
> + Properties for a single LED.
> +
> + properties:
> + reg:
> + description:
> + Index of the LED. Only one LED is supported at the moment.
> + minimum: 0
> + maximum: 0
> +
> +required:
> + - compatible
> + - "#address-cells"
> + - "#size-cells"
additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
> new file mode 100644
> index 000000000000..79a232d75093
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
> @@ -0,0 +1,82 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: iEi WT61P803 PUZZLE MCU from IEI Integration Corp.
> +
> +maintainers:
> + - Luka Kovacic <luka.kovacic@sartura.hr>
> +
> +description: |
> + iEi WT61P803 PUZZLE MCU is embedded in some iEi Puzzle series boards.
> + It's used for controlling system power states, fans, LEDs and temperature
> + sensors.
> +
> + For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the
> + binding documents under the respective subsystem directories.
> +
> +properties:
> + compatible:
> + const: iei,wt61p803-puzzle
> +
> + current-speed:
> + description:
> + Serial bus speed in bps
> + maxItems: 1
> +
> + enable-beep: true
> +
> + iei-wt61p803-hwmon:
Just 'hwmon'
> + $ref: ../hwmon/iei,wt61p803-puzzle-hwmon.yaml
> +
> + leds:
> + $ref: ../leds/iei,wt61p803-puzzle-leds.yaml
> +
> +required:
> + - compatible
> + - current-speed
additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/leds/common.h>
> + serial {
> + status = "okay";
> + mcu {
> + compatible = "iei,wt61p803-puzzle";
> + current-speed = <115200>;
> + enable-beep;
> +
> + leds {
> + compatible = "iei,wt61p803-puzzle-leds";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + function = LED_FUNCTION_POWER;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> + };
> +
> + iei-wt61p803-puzzle-hwmon {
> + compatible = "iei,wt61p803-puzzle-hwmon";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + fan-group@0 {
> + #cooling-cells = <2>;
> + reg = <0x00>;
> + cooling-levels = <64 102 170 230 250>;
> + };
> +
> + fan-group@1 {
> + #cooling-cells = <2>;
> + reg = <0x01>;
> + cooling-levels = <64 102 170 230 250>;
> + };
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 63996ab03521..5f2595f0b2ad 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -467,6 +467,8 @@ patternProperties:
> description: IC Plus Corp.
> "^idt,.*":
> description: Integrated Device Technologies, Inc.
> + "^iei,.*":
> + description: IEI Integration Corp.
> "^ifi,.*":
> description: Ingenieurburo Fur Ic-Technologie (I/F/I)
> "^ilitek,.*":
> --
> 2.26.2
>
next prev parent reply other threads:[~2020-10-20 15:30 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-19 22:18 [PATCH v6 0/6] Add support for the iEi WT61P803 PUZZLE MCU Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 1/6] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings Luka Kovacic
2020-10-20 15:24 ` Rob Herring
2020-10-20 15:30 ` Rob Herring [this message]
2020-10-23 21:54 ` Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 2/6] drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU Luka Kovacic
2020-10-20 2:19 ` kernel test robot
2020-11-04 15:22 ` Lee Jones
2020-11-10 20:14 ` Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 3/6] drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver Luka Kovacic
2020-10-20 9:00 ` Andy Shevchenko
2020-10-23 21:47 ` Luka Kovacic
2020-10-25 1:26 ` Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 4/6] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 5/6] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 6/6] MAINTAINERS: Add an entry for the iEi WT61P803 PUZZLE driver Luka Kovacic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201020153016.GC866676@bogus \
--to=robh@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=jdelvare@suse.com \
--cc=lee.jones@linaro.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=luka.kovacic@sartura.hr \
--cc=luka.perkov@sartura.hr \
--cc=marek.behun@nic.cz \
--cc=pavel@ucw.cz \
--cc=robert.marko@sartura.hr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).