Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Sylwester Nawrocki <snawrocki@kernel.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCH 02/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4210 boards
Date: Mon, 26 Oct 2020 19:15:18 +0100
Message-ID: <20201026181528.163143-3-krzk@kernel.org> (raw)
In-Reply-To: <20201026181528.163143-1-krzk@kernel.org>

The Devicetree specification expects device node names to have a generic
name, representing the class of a device.  Also the convention for node
names is to use hyphens, not underscores.

No functional changes.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos4210-i9100.dts    |  6 +++---
 arch/arm/boot/dts/exynos4210-origen.dts   |  4 ++--
 arch/arm/boot/dts/exynos4210-smdkv310.dts | 22 +++++++++++-----------
 arch/arm/boot/dts/exynos4210-trats.dts    |  4 ++--
 4 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 5370ee477186..a0c3bab382ae 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -329,7 +329,7 @@ &i2c_3 {
 	pinctrl-0 = <&i2c3_bus>;
 	pinctrl-names = "default";
 
-	mxt224-touchscreen@4a {
+	touchscreen@4a {
 		compatible = "atmel,maxtouch";
 		reg = <0x4a>;
 
@@ -348,7 +348,7 @@ &i2c_5 {
 	pinctrl-0 = <&i2c5_bus>;
 	pinctrl-names = "default";
 
-	max8997_pmic@66 {
+	pmic@66 {
 		compatible = "maxim,max8997-pmic";
 		reg = <0x66>;
 
@@ -597,7 +597,7 @@ &i2c_7 {
 	pinctrl-0 = <&i2c7_bus>;
 	pinctrl-names = "default";
 
-	ak8975@c {
+	magnetometer@c {
 		compatible = "asahi-kasei,ak8975";
 		reg = <0x0c>;
 
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 7d2cfbafefb2..1c5394152561 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -43,7 +43,7 @@ mmc_reg: voltage-regulator {
 		enable-active-high;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		up {
@@ -171,7 +171,7 @@ &i2c_0 {
 	pinctrl-0 = <&i2c0_bus>;
 	pinctrl-names = "default";
 
-	max8997_pmic@66 {
+	pmic@66 {
 		compatible = "maxim,max8997-pmic";
 		reg = <0x66>;
 		interrupt-parent = <&gpx0>;
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index c5609afa6101..d5797a67bf48 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -90,61 +90,61 @@ &keypad {
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	status = "okay";
 
-	key_1 {
+	key-1 {
 		keypad,row = <0>;
 		keypad,column = <3>;
 		linux,code = <2>;
 	};
 
-	key_2 {
+	key-2 {
 		keypad,row = <0>;
 		keypad,column = <4>;
 		linux,code = <3>;
 	};
 
-	key_3 {
+	key-3 {
 		keypad,row = <0>;
 		keypad,column = <5>;
 		linux,code = <4>;
 	};
 
-	key_4 {
+	key-4 {
 		keypad,row = <0>;
 		keypad,column = <6>;
 		linux,code = <5>;
 	};
 
-	key_5 {
+	key-5 {
 		keypad,row = <0>;
 		keypad,column = <7>;
 		linux,code = <6>;
 	};
 
-	key_a {
+	key-a {
 		keypad,row = <1>;
 		keypad,column = <3>;
 		linux,code = <30>;
 	};
 
-	key_b {
+	key-b {
 		keypad,row = <1>;
 		keypad,column = <4>;
 		linux,code = <48>;
 	};
 
-	key_c {
+	key-c {
 		keypad,row = <1>;
 		keypad,column = <5>;
 		linux,code = <46>;
 	};
 
-	key_d {
+	key-d {
 		keypad,row = <1>;
 		keypad,column = <6>;
 		linux,code = <32>;
 	};
 
-	key_e {
+	key-e {
 		keypad,row = <1>;
 		keypad,column = <7>;
 		linux,code = <18>;
@@ -200,7 +200,7 @@ &spi_2 {
 	cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	w25x80@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "w25x80";
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index a226bec56a45..f10c63ae9973 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -263,7 +263,7 @@ &i2c_3 {
 	pinctrl-names = "default";
 	status = "okay";
 
-	mms114-touchscreen@48 {
+	touchscreen@48 {
 		compatible = "melfas,mms114";
 		reg = <0x48>;
 		interrupt-parent = <&gpx0>;
@@ -283,7 +283,7 @@ &i2c_5 {
 	pinctrl-names = "default";
 	status = "okay";
 
-	max8997_pmic@66 {
+	pmic@66 {
 		compatible = "maxim,max8997-pmic";
 
 		reg = <0x66>;
-- 
2.25.1


  parent reply index

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-26 18:15 [PATCH 00/12] ARM: dts: samsung: minor node name cleanups Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 01/12] ARM: dts: exynos: adjust node names to DT spec in Exynos3250 boards Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski [this message]
2020-10-26 18:15 ` [PATCH 03/12] ARM: dts: exynos: override GPIO keys node by label in Exynos4412 Odroid family Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 04/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards Krzysztof Kozlowski
2020-10-26 21:02   ` Marek Szyprowski
2020-10-27 10:38     ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 05/12] ARM: dts: exynos: remove redundant status=okay " Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 06/12] ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 07/12] ARM: dts: exynos: adjust node names to DT spec in Odroid XU Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 08/12] ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards Krzysztof Kozlowski
2020-10-26 21:47   ` Marek Szyprowski
2020-10-27 10:37     ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 09/12] ARM: dts: s5pv210: adjust node names to DT spec Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 10/12] arm64: dts: exynos: adjust node names to DT spec in Exynos5433 TM2 Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 11/12] arm64: dts: exynos: adjust node names to DT spec in Exynos7 Espresso Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 12/12] arm64: dts: exynos: remove redundant status=okay in Exynos5433 TM2 Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201026181528.163143-3-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=alim.akhtar@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=robh+dt@kernel.org \
    --cc=snawrocki@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git
	git clone --mirror https://lore.kernel.org/linux-devicetree/1 linux-devicetree/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git