From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
Jonathan Bakker <xc-racer2@live.ca>,
Sasha Levin <sashal@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH AUTOSEL 5.9 134/147] ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings
Date: Mon, 26 Oct 2020 19:48:52 -0400 [thread overview]
Message-ID: <20201026234905.1022767-134-sashal@kernel.org> (raw)
In-Reply-To: <20201026234905.1022767-1-sashal@kernel.org>
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit ea4e792f3c8931fffec4d700cf6197d84e9f35a6 ]
There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:
amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/s5pv210.dtsi | 49 +++++++++++++++-------------------
1 file changed, 21 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 1b0ee884e91db..84e4447931de5 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -128,35 +128,28 @@ wakeup-interrupt-controller {
};
};
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
-
- pdma0: dma@e0900000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0xe0900000 0x1000>;
- interrupt-parent = <&vic0>;
- interrupts = <19>;
- clocks = <&clocks CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma0: dma@e0900000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xe0900000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <19>;
+ clocks = <&clocks CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
- pdma1: dma@e0a00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0xe0a00000 0x1000>;
- interrupt-parent = <&vic0>;
- interrupts = <20>;
- clocks = <&clocks CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma1: dma@e0a00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xe0a00000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <20>;
+ clocks = <&clocks CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
adc: adc@e1700000 {
--
2.25.1
next prev parent reply other threads:[~2020-10-27 0:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20201026234905.1022767-1-sashal@kernel.org>
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 102/147] ARC: [dts] fix the errors detected by dtbs_check Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 129/147] arm64: dts: renesas: ulcb: add full-pwr-cycle-in-suspend into eMMC nodes Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 130/147] ARM: dts: omap4: Fix sgx clock rate for 4430 Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 133/147] ARM: dts: s5pv210: Enable audio on Aries boards Sasha Levin
2020-10-26 23:48 ` Sasha Levin [this message]
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 135/147] ARM: dts: s5pv210: move fixed clocks under root node Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 136/147] ARM: dts: s5pv210: move PMU node out of clock controller Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 137/147] ARM: dts: s5pv210: remove dedicated 'audio-subsystem' node Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 138/147] ARM: dts: s5pv210: add RTC 32 KHz clock in Aries family Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 139/147] ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201026234905.1022767-134-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=xc-racer2@live.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).