devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Atish Patra <atish.patra@wdc.com>
To: linux-kernel@vger.kernel.org
Cc: Atish Patra <atish.patra@wdc.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alistair Francis <alistair.francis@wdc.com>,
	Anup Patel <anup.patel@wdc.com>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Rob Herring <robh+dt@kernel.org>,
	padmarao.begari@microchip.com,
	Daire McNamara <daire.mcnamara@microchip.com>,
	Cyril.Jean@microchip.com
Subject: [RFC PATCH 2/3] RISC-V: Initial DTS for Microchip ICICLE board
Date: Wed, 28 Oct 2020 16:27:58 -0700	[thread overview]
Message-ID: <20201028232759.1928479-3-atish.patra@wdc.com> (raw)
In-Reply-To: <20201028232759.1928479-1-atish.patra@wdc.com>

Add initial DTS for Microchip ICICLE board having only
essential devcies (clocks, sdhci, ethernet, serial, etc).

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/boot/dts/Makefile                  |   1 +
 arch/riscv/boot/dts/microchip/Makefile        |   2 +
 .../microchip/microchip-icicle-kit-a000.dts   | 313 ++++++++++++++++++
 3 files changed, 316 insertions(+)
 create mode 100644 arch/riscv/boot/dts/microchip/Makefile
 create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts

diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index ca1f8cbd78c0..3ea94ea0a18a 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-y += sifive
 subdir-y += kendryte
+subdir-y += microchip
 
 obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
new file mode 100644
index 000000000000..55ad77521304
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb
diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts
new file mode 100644
index 000000000000..5848920af55c
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2020 Microchip Technology Inc */
+
+/dts-v1/;
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define RTCCLK_FREQ		1000000
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Microchip PolarFire-SoC";
+	compatible = "microchip,polarfire-soc";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <RTCCLK_FREQ>;
+
+		cpu@0 {
+			clock-frequency = <0>;
+			compatible = "sifive,rocket0", "riscv";
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <16384>;
+			reg = <0>;
+			riscv,isa = "rv64imac";
+			status = "disabled";
+
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu@1 {
+			clock-frequency = <0>;
+			compatible = "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <1>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			status = "okay";
+
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu@2 {
+			clock-frequency = <0>;
+			compatible = "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <2>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			status = "okay";
+
+			cpu2_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu@3 {
+			clock-frequency = <0>;
+			compatible = "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <3>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			status = "okay";
+
+			cpu3_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu@4 {
+			clock-frequency = <0>;
+			compatible = "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <4>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			status = "okay";
+			cpu4_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+		clocks = <&clkcfg 26>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		cache-controller@2010000 {
+			compatible = "sifive,fu540-c000-ccache", "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <1024>;
+			cache-size = <2097152>;
+			cache-unified;
+			interrupt-parent = <&plic>;
+			interrupts = <1 2 3>;
+			reg = <0x0 0x2010000 0x0 0x1000>;
+		};
+
+		clint@2000000 {
+			compatible = "riscv,clint0";
+			reg = <0x0 0x2000000 0x0 0xC000>;
+			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+						&cpu1_intc 3 &cpu1_intc 7
+						&cpu2_intc 3 &cpu2_intc 7
+						&cpu3_intc 3 &cpu3_intc 7
+						&cpu4_intc 3 &cpu4_intc 7>;
+		};
+
+		plic: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			compatible = "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			riscv,ndev = <53>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 11
+					&cpu1_intc 11 &cpu1_intc 9
+					&cpu2_intc 11 &cpu2_intc 9
+					&cpu3_intc 11 &cpu3_intc 9
+					&cpu4_intc 11 &cpu4_intc 9>;
+		};
+
+		dma@3000000 {
+			compatible = "sifive,fu540-c000-pdma";
+			reg = <0x0 0x3000000 0x0 0x8000>;
+			interrupt-parent = <&plic>;
+			interrupts = <23 24 25 26 27 28 29 30>;
+			#dma-cells = <1>;
+		};
+
+		refclk: refclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <600000000>;
+			clock-output-names = "msspllclk";
+		};
+
+		clkcfg: clkcfg@20002000 {
+			compatible = "microchip,pfsoc-clkcfg";
+			reg = <0x0 0x20002000 0x0 0x1000>;
+			reg-names = "mss_sysreg";
+			clocks = <&refclk>;
+			#clock-cells = <1>;
+			clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk";
+		};
+
+		serial0: serial@20000000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20000000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <90>;
+			current-speed = <115200>;
+			clocks = <&clkcfg 8>;
+			status = "okay";
+		};
+
+		serial1: serial@20100000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20100000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <91>;
+			current-speed = <115200>;
+			clocks = <&clkcfg 9>;
+			status = "okay";
+		};
+
+		serial2: serial@20102000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20102000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <92>;
+			current-speed = <115200>;
+			clocks = <&clkcfg 10>;
+			status = "okay";
+		};
+
+		serial3: serial@20104000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20104000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <93>;
+			current-speed = <115200>;
+			clocks = <&clkcfg 11>;
+			status = "okay";
+		};
+
+		sdcard: sdhc@20008000 {
+			compatible = "cdns,sd4hc";
+			reg = <0x0 0x20008000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <88>;
+			pinctrl-names = "default";
+			clocks = <&clkcfg 6>;
+			bus-width = <4>;
+			disable-wp;
+			no-1-8-v;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+			card-detect-delay = <200>;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			max-frequency = <200000000>;
+			status = "okay";
+		};
+
+		emac1: ethernet@20112000 {
+			compatible = "cdns,macb";
+			reg = <0x0 0x20112000 0x0 0x2000>;
+			interrupt-parent = <&plic>;
+			interrupts = <70 71 72 73>;
+			mac-address = [56 34 12 00 FC 00];
+			phy-mode = "sgmii";
+			clocks = <&clkcfg 5>, <&clkcfg 2>;
+			clock-names = "pclk", "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy1: ethernet-phy@9 {
+				reg = <9>;
+				ti,fifo-depth = <0x01>;
+			};
+		};
+
+		uio_axi_lsram@2030000000 {
+			compatible = "generic-uio";
+			reg = <0x20 0x30000000 0 0x80000000 >;
+			status = "okay";
+		};
+	};
+};
-- 
2.25.1


  parent reply	other threads:[~2020-10-28 23:28 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-28 23:27 [RFC PATCH 0/3] Add Microchip PolarFire Soc Support Atish Patra
2020-10-28 23:27 ` [RFC PATCH 1/3] RISC-V: Add Microchip PolarFire SoC kconfig option Atish Patra
2020-10-30  9:08   ` Anup Patel
2020-11-03  9:55   ` Bin Meng
2020-11-06  7:14   ` Palmer Dabbelt
2020-10-28 23:27 ` Atish Patra [this message]
2020-10-29 10:24   ` [RFC PATCH 2/3] RISC-V: Initial DTS for Microchip ICICLE board Ben Dooks
2020-10-30  7:11     ` Atish Patra
2020-10-30 21:19       ` Ben Dooks
2020-11-03 15:07         ` Atish Patra
2020-11-03 15:19           ` Ben Dooks
2020-11-03 18:10           ` Cyril.Jean
2020-11-03 18:28             ` Ben Dooks
2020-11-03 18:36               ` Atish Patra
2020-11-03 18:39                 ` Ben Dooks
2020-11-03 18:45                   ` Atish Patra
2020-11-03 18:40               ` Cyril.Jean
2020-11-03 18:46                 ` Ben Dooks
2020-11-04  2:41     ` Bin Meng
2020-10-30  9:05   ` Anup Patel
2020-10-30 20:27     ` Atish Patra
2020-11-03 10:59       ` Ben Dooks
2020-11-03 15:08         ` Atish Patra
2020-10-30 21:20     ` Ben Dooks
2020-11-03 10:00     ` Bin Meng
2020-11-03 18:19       ` Cyril.Jean
2020-11-03 18:38         ` Atish Patra
2020-11-03 18:50           ` Cyril.Jean
2020-11-03 19:02             ` Atish Patra
2020-11-06  7:14   ` Palmer Dabbelt
2020-10-28 23:27 ` [RFC PATCH 3/3] RISC-V: Enable Microchip PolarFire ICICLE SoC Atish Patra
2020-10-30  9:09   ` Anup Patel
2020-10-30 21:21     ` Ben Dooks
2020-11-03 10:03   ` Bin Meng
2020-11-06  7:14   ` Palmer Dabbelt
2020-11-06  7:14 ` [RFC PATCH 0/3] Add Microchip PolarFire Soc Support Palmer Dabbelt
2020-11-06  7:37   ` Atish Patra
2020-11-06  8:11     ` Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201028232759.1928479-3-atish.patra@wdc.com \
    --to=atish.patra@wdc.com \
    --cc=Cyril.Jean@microchip.com \
    --cc=alistair.francis@wdc.com \
    --cc=anup.patel@wdc.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=daire.mcnamara@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=padmarao.begari@microchip.com \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).