* [PATCH i2c-next v1 6/6] dt-bindings: i2c: Convert DT file to YAML schema
[not found] <cover.1603925077.git.kblaiech@nvidia.com>
@ 2020-10-28 22:55 ` Khalil Blaiech
2020-10-29 15:33 ` Rob Herring
2020-10-29 15:33 ` Rob Herring
0 siblings, 2 replies; 5+ messages in thread
From: Khalil Blaiech @ 2020-10-28 22:55 UTC (permalink / raw)
To: linux-i2c, devicetree; +Cc: kblaiech, wsa+renesas, Leon Romanovsky
Write the devicetree binding text file in schema file, JSON
compatible subset of YAML.
Besides, add an entry within MAINTAINERS file.
Fixes: d9becc53b3ade81e ("dt-bindings: i2c: I2C binding for Mellanox BlueField SoC")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
---
.../bindings/i2c/mellanox,i2c-mlxbf.txt | 42 ----------
.../bindings/i2c/mellanox,i2c-mlxbf.yaml | 78 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 79 insertions(+), 42 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
create mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
deleted file mode 100644
index 566ea861aa00..000000000000
--- a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Device tree configuration for the Mellanox I2C SMBus on BlueField SoCs
-
-Required Properties:
-
-- compatible : should be "mellanox,i2c-mlxbf1" or "mellanox,i2c-mlxbf2".
-
-- reg : address offset and length of the device registers. The
- registers consist of the following set of resources:
- 1) Smbus block registers.
- 2) Cause master registers.
- 3) Cause slave registers.
- 4) Cause coalesce registers (if compatible isn't set
- to "mellanox,i2c-mlxbf1").
-
-- interrupts : interrupt number.
-
-Optional Properties:
-
-- clock-frequency : bus frequency used to configure timing registers;
- allowed values are 100000, 400000 and 1000000;
- those are expressed in Hz. Default is 100000.
-
-Example:
-
-i2c@2804000 {
- compatible = "mellanox,i2c-mlxbf1";
- reg = <0x02804000 0x800>,
- <0x02801200 0x020>,
- <0x02801260 0x020>;
- interrupts = <57>;
- clock-frequency = <100000>;
-};
-
-i2c@2808800 {
- compatible = "mellanox,i2c-mlxbf2";
- reg = <0x02808800 0x600>,
- <0x02808e00 0x020>,
- <0x02808e20 0x020>,
- <0x02808e40 0x010>;
- interrupts = <57>;
- clock-frequency = <400000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
new file mode 100644
index 000000000000..b9f6b07c503f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/mellanox,i2c-mlxbf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mellanox I2C SMBus on BlueField SoCs
+
+maintainers:
+ - Khalil Blaiech <kblaiech@nvidia.com>
+
+properties:
+ compatible:
+ enum:
+ - mellanox,i2c-mlxbf1
+ - mellanox,i2c-mlxbf2
+
+ reg:
+ minItems: 3
+ maxItems: 4
+ items:
+ - description: Smbus block registers
+ - description: Cause master registers
+ - description: Cause slave registers
+ - description: Cause coalesce registers
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency:
+ enum: [ 100000, 400000, 1000000 ]
+
+ description:
+ bus frequency used to configure timing registers;
+ The frequency is expressed in Hz. Default is 100000.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mellanox,i2c-mlxbf1
+
+then:
+ properties:
+ reg:
+ maxItems: 3
+
+examples:
+ - |
+ i2c@2804000 {
+ compatible = "mellanox,i2c-mlxbf1";
+ reg = <0x02804000 0x800>,
+ <0x02801200 0x020>,
+ <0x02801260 0x020>;
+ interrupts = <57>;
+ clock-frequency = <100000>;
+ };
+
+ - |
+ i2c@2808800 {
+ compatible = "mellanox,i2c-mlxbf2";
+ reg = <0x02808800 0x600>,
+ <0x02808e00 0x020>,
+ <0x02808e20 0x020>,
+ <0x02808e40 0x010>;
+ interrupts = <57>;
+ clock-frequency = <400000>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9128200af1d0..8dba7ace4a40 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11075,6 +11075,7 @@ MELLANOX BLUEFIELD I2C DRIVER
M: Khalil Blaiech <kblaiech@nvidia.com>
L: linux-i2c@vger.kernel.org
S: Supported
+F: Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
F: drivers/i2c/busses/i2c-mlxbf.c
MELLANOX ETHERNET DRIVER (mlx4_en)
--
2.24.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH i2c-next v1 6/6] dt-bindings: i2c: Convert DT file to YAML schema
2020-10-28 22:55 ` [PATCH i2c-next v1 6/6] dt-bindings: i2c: Convert DT file to YAML schema Khalil Blaiech
@ 2020-10-29 15:33 ` Rob Herring
2020-11-03 14:08 ` Khalil Blaiech
2020-10-29 15:33 ` Rob Herring
1 sibling, 1 reply; 5+ messages in thread
From: Rob Herring @ 2020-10-29 15:33 UTC (permalink / raw)
To: Khalil Blaiech; +Cc: linux-i2c, devicetree, wsa+renesas, Leon Romanovsky
On Wed, Oct 28, 2020 at 06:55:54PM -0400, Khalil Blaiech wrote:
> Write the devicetree binding text file in schema file, JSON
> compatible subset of YAML.
> Besides, add an entry within MAINTAINERS file.
The subject should contain something about Mellanox BlueField.
>
> Fixes: d9becc53b3ade81e ("dt-bindings: i2c: I2C binding for Mellanox BlueField SoC")
Fixes is not appropriate for this.
> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
> ---
> .../bindings/i2c/mellanox,i2c-mlxbf.txt | 42 ----------
> .../bindings/i2c/mellanox,i2c-mlxbf.yaml | 78 +++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 79 insertions(+), 42 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
>
> diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
> deleted file mode 100644
> index 566ea861aa00..000000000000
> --- a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -Device tree configuration for the Mellanox I2C SMBus on BlueField SoCs
> -
> -Required Properties:
> -
> -- compatible : should be "mellanox,i2c-mlxbf1" or "mellanox,i2c-mlxbf2".
> -
> -- reg : address offset and length of the device registers. The
> - registers consist of the following set of resources:
> - 1) Smbus block registers.
> - 2) Cause master registers.
> - 3) Cause slave registers.
> - 4) Cause coalesce registers (if compatible isn't set
> - to "mellanox,i2c-mlxbf1").
> -
> -- interrupts : interrupt number.
> -
> -Optional Properties:
> -
> -- clock-frequency : bus frequency used to configure timing registers;
> - allowed values are 100000, 400000 and 1000000;
> - those are expressed in Hz. Default is 100000.
> -
> -Example:
> -
> -i2c@2804000 {
> - compatible = "mellanox,i2c-mlxbf1";
> - reg = <0x02804000 0x800>,
> - <0x02801200 0x020>,
> - <0x02801260 0x020>;
> - interrupts = <57>;
> - clock-frequency = <100000>;
> -};
> -
> -i2c@2808800 {
> - compatible = "mellanox,i2c-mlxbf2";
> - reg = <0x02808800 0x600>,
> - <0x02808e00 0x020>,
> - <0x02808e20 0x020>,
> - <0x02808e40 0x010>;
> - interrupts = <57>;
> - clock-frequency = <400000>;
> -};
> diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
> new file mode 100644
> index 000000000000..b9f6b07c503f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: GPL-2.0
If you have rights, please dual license adding BSD-2-Clause.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/mellanox,i2c-mlxbf.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mellanox I2C SMBus on BlueField SoCs
> +
> +maintainers:
> + - Khalil Blaiech <kblaiech@nvidia.com>
allOf:
- $ref: i2c-controller.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - mellanox,i2c-mlxbf1
> + - mellanox,i2c-mlxbf2
> +
> + reg:
> + minItems: 3
> + maxItems: 4
> + items:
> + - description: Smbus block registers
> + - description: Cause master registers
> + - description: Cause slave registers
> + - description: Cause coalesce registers
> +
> + interrupts:
> + maxItems: 1
> +
> + clock-frequency:
> + enum: [ 100000, 400000, 1000000 ]
> +
Drop the blank line.
> + description:
> + bus frequency used to configure timing registers;
> + The frequency is expressed in Hz. Default is 100000.
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +unevaluatedProperties: false
> +
> +if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mellanox,i2c-mlxbf1
> +
> +then:
> + properties:
> + reg:
> + maxItems: 3
> +
> +examples:
> + - |
> + i2c@2804000 {
> + compatible = "mellanox,i2c-mlxbf1";
> + reg = <0x02804000 0x800>,
> + <0x02801200 0x020>,
> + <0x02801260 0x020>;
> + interrupts = <57>;
> + clock-frequency = <100000>;
> + };
> +
> + - |
> + i2c@2808800 {
> + compatible = "mellanox,i2c-mlxbf2";
> + reg = <0x02808800 0x600>,
> + <0x02808e00 0x020>,
> + <0x02808e20 0x020>,
> + <0x02808e40 0x010>;
> + interrupts = <57>;
> + clock-frequency = <400000>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9128200af1d0..8dba7ace4a40 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11075,6 +11075,7 @@ MELLANOX BLUEFIELD I2C DRIVER
> M: Khalil Blaiech <kblaiech@nvidia.com>
> L: linux-i2c@vger.kernel.org
> S: Supported
> +F: Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
> F: drivers/i2c/busses/i2c-mlxbf.c
>
> MELLANOX ETHERNET DRIVER (mlx4_en)
> --
> 2.24.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH i2c-next v1 6/6] dt-bindings: i2c: Convert DT file to YAML schema
2020-10-28 22:55 ` [PATCH i2c-next v1 6/6] dt-bindings: i2c: Convert DT file to YAML schema Khalil Blaiech
2020-10-29 15:33 ` Rob Herring
@ 2020-10-29 15:33 ` Rob Herring
2020-11-03 14:06 ` Khalil Blaiech
1 sibling, 1 reply; 5+ messages in thread
From: Rob Herring @ 2020-10-29 15:33 UTC (permalink / raw)
To: Khalil Blaiech; +Cc: linux-i2c, Leon Romanovsky, devicetree, wsa+renesas
On Wed, 28 Oct 2020 18:55:54 -0400, Khalil Blaiech wrote:
> Write the devicetree binding text file in schema file, JSON
> compatible subset of YAML.
> Besides, add an entry within MAINTAINERS file.
>
> Fixes: d9becc53b3ade81e ("dt-bindings: i2c: I2C binding for Mellanox BlueField SoC")
> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
> ---
> .../bindings/i2c/mellanox,i2c-mlxbf.txt | 42 ----------
> .../bindings/i2c/mellanox,i2c-mlxbf.yaml | 78 +++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 79 insertions(+), 42 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
./Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml:28:7: [warning] wrong indentation: expected 4 but found 6 (indentation)
./Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml:31:7: [warning] wrong indentation: expected 4 but found 6 (indentation)
dtschema/dtc warnings/errors:
See https://patchwork.ozlabs.org/patch/1389582
The base for the patch is generally the last rc1. Any dependencies
should be noted.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH i2c-next v1 6/6] dt-bindings: i2c: Convert DT file to YAML schema
2020-10-29 15:33 ` Rob Herring
@ 2020-11-03 14:06 ` Khalil Blaiech
0 siblings, 0 replies; 5+ messages in thread
From: Khalil Blaiech @ 2020-11-03 14:06 UTC (permalink / raw)
To: Rob Herring; +Cc: linux-i2c, Leon Romanovsky, devicetree, wsa+renesas
> On Wed, 28 Oct 2020 18:55:54 -0400, Khalil Blaiech wrote:
> > Write the devicetree binding text file in schema file, JSON
> > compatible subset of YAML.
> > Besides, add an entry within MAINTAINERS file.
> >
> > Fixes: d9becc53b3ade81e ("dt-bindings: i2c: I2C binding for Mellanox
> BlueField SoC")
> > Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
> > Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
> > ---
> > .../bindings/i2c/mellanox,i2c-mlxbf.txt | 42 ----------
> > .../bindings/i2c/mellanox,i2c-mlxbf.yaml | 78 +++++++++++++++++++
> > MAINTAINERS | 1 +
> > 3 files changed, 79 insertions(+), 42 deletions(-)
> > delete mode 100644
> Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
> > create mode 100644
> Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
> >
>
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
> ./Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml:28:7:
> [warning] wrong indentation: expected 4 but found 6 (indentation)
> ./Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml:31:7:
> [warning] wrong indentation: expected 4 but found 6 (indentation)
>
> dtschema/dtc warnings/errors:
>
>
> See https://patchwork.ozlabs.org/patch/1389582
>
> The base for the patch is generally the last rc1. Any dependencies
> should be noted.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
Thank you, Rob. Will do.
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH i2c-next v1 6/6] dt-bindings: i2c: Convert DT file to YAML schema
2020-10-29 15:33 ` Rob Herring
@ 2020-11-03 14:08 ` Khalil Blaiech
0 siblings, 0 replies; 5+ messages in thread
From: Khalil Blaiech @ 2020-11-03 14:08 UTC (permalink / raw)
To: Rob Herring; +Cc: linux-i2c, devicetree, wsa+renesas, Leon Romanovsky
> On Wed, Oct 28, 2020 at 06:55:54PM -0400, Khalil Blaiech wrote:
> > Write the devicetree binding text file in schema file, JSON
> > compatible subset of YAML.
> > Besides, add an entry within MAINTAINERS file.
>
> The subject should contain something about Mellanox BlueField.
Got it.
> >
> > Fixes: d9becc53b3ade81e ("dt-bindings: i2c: I2C binding for Mellanox
> BlueField SoC")
>
> Fixes is not appropriate for this.
Should I remove?
>
> > Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
> > Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
> > ---
> > .../bindings/i2c/mellanox,i2c-mlxbf.txt | 42 ----------
> > .../bindings/i2c/mellanox,i2c-mlxbf.yaml | 78 +++++++++++++++++++
> > MAINTAINERS | 1 +
> > 3 files changed, 79 insertions(+), 42 deletions(-)
> > delete mode 100644
> Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
> > create mode 100644
> Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
> b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
> > deleted file mode 100644
> > index 566ea861aa00..000000000000
> > --- a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
> > +++ /dev/null
> > @@ -1,42 +0,0 @@
> > -Device tree configuration for the Mellanox I2C SMBus on BlueField SoCs
> > -
> > -Required Properties:
> > -
> > -- compatible : should be "mellanox,i2c-mlxbf1" or "mellanox,i2c-mlxbf2".
> > -
> > -- reg : address offset and length of the device registers. The
> > - registers consist of the following set of resources:
> > - 1) Smbus block registers.
> > - 2) Cause master registers.
> > - 3) Cause slave registers.
> > - 4) Cause coalesce registers (if compatible isn't set
> > - to "mellanox,i2c-mlxbf1").
> > -
> > -- interrupts : interrupt number.
> > -
> > -Optional Properties:
> > -
> > -- clock-frequency : bus frequency used to configure timing registers;
> > - allowed values are 100000, 400000 and 1000000;
> > - those are expressed in Hz. Default is 100000.
> > -
> > -Example:
> > -
> > -i2c@2804000 {
> > - compatible = "mellanox,i2c-mlxbf1";
> > - reg = <0x02804000 0x800>,
> > - <0x02801200 0x020>,
> > - <0x02801260 0x020>;
> > - interrupts = <57>;
> > - clock-frequency = <100000>;
> > -};
> > -
> > -i2c@2808800 {
> > - compatible = "mellanox,i2c-mlxbf2";
> > - reg = <0x02808800 0x600>,
> > - <0x02808e00 0x020>,
> > - <0x02808e20 0x020>,
> > - <0x02808e40 0x010>;
> > - interrupts = <57>;
> > - clock-frequency = <400000>;
> > -};
> > diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-
> mlxbf.yaml b/Documentation/devicetree/bindings/i2c/mellanox,i2c-
> mlxbf.yaml
> > new file mode 100644
> > index 000000000000..b9f6b07c503f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
> > @@ -0,0 +1,78 @@
> > +# SPDX-License-Identifier: GPL-2.0
>
> If you have rights, please dual license adding BSD-2-Clause.
Sure.
>
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i2c/mellanox,i2c-mlxbf.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Mellanox I2C SMBus on BlueField SoCs
> > +
> > +maintainers:
> > + - Khalil Blaiech <kblaiech@nvidia.com>
>
> allOf:
> - $ref: i2c-controller.yaml#
>
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - mellanox,i2c-mlxbf1
> > + - mellanox,i2c-mlxbf2
> > +
> > + reg:
> > + minItems: 3
> > + maxItems: 4
> > + items:
> > + - description: Smbus block registers
> > + - description: Cause master registers
> > + - description: Cause slave registers
> > + - description: Cause coalesce registers
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clock-frequency:
> > + enum: [ 100000, 400000, 1000000 ]
> > +
>
> Drop the blank line.
>
> > + description:
> > + bus frequency used to configure timing registers;
> > + The frequency is expressed in Hz. Default is 100000.
> > +
> > +additionalProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > +
> > +unevaluatedProperties: false
> > +
> > +if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - mellanox,i2c-mlxbf1
> > +
> > +then:
> > + properties:
> > + reg:
> > + maxItems: 3
> > +
> > +examples:
> > + - |
> > + i2c@2804000 {
> > + compatible = "mellanox,i2c-mlxbf1";
> > + reg = <0x02804000 0x800>,
> > + <0x02801200 0x020>,
> > + <0x02801260 0x020>;
> > + interrupts = <57>;
> > + clock-frequency = <100000>;
> > + };
> > +
> > + - |
> > + i2c@2808800 {
> > + compatible = "mellanox,i2c-mlxbf2";
> > + reg = <0x02808800 0x600>,
> > + <0x02808e00 0x020>,
> > + <0x02808e20 0x020>,
> > + <0x02808e40 0x010>;
> > + interrupts = <57>;
> > + clock-frequency = <400000>;
> > + };
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 9128200af1d0..8dba7ace4a40 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -11075,6 +11075,7 @@ MELLANOX BLUEFIELD I2C DRIVER
> > M: Khalil Blaiech <kblaiech@nvidia.com>
> > L: linux-i2c@vger.kernel.org
> > S: Supported
> > +F: Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
> > F: drivers/i2c/busses/i2c-mlxbf.c
> >
> > MELLANOX ETHERNET DRIVER (mlx4_en)
> > --
> > 2.24.1
> >
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-11-03 14:10 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <cover.1603925077.git.kblaiech@nvidia.com>
2020-10-28 22:55 ` [PATCH i2c-next v1 6/6] dt-bindings: i2c: Convert DT file to YAML schema Khalil Blaiech
2020-10-29 15:33 ` Rob Herring
2020-11-03 14:08 ` Khalil Blaiech
2020-10-29 15:33 ` Rob Herring
2020-11-03 14:06 ` Khalil Blaiech
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).