From: Rob Herring <robh@kernel.org>
To: Daniel Palmer <daniel@0x0f.com>
Cc: soc@kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linus.walleij@linaro.org,
maz@kernel.org, w@1wt.eu
Subject: Re: [PATCH v3 2/5] dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
Date: Wed, 11 Nov 2020 15:06:02 -0600 [thread overview]
Message-ID: <20201111210602.GA1974594@bogus> (raw)
In-Reply-To: <20201109121731.1537580-3-daniel@0x0f.com>
On Mon, Nov 09, 2020 at 09:17:28PM +0900, Daniel Palmer wrote:
> Add a binding description for the MStar/SigmaStar GPIO controller
> found in the MSC313 and later ARMv7 SoCs.
>
> Signed-off-by: Daniel Palmer <daniel@0x0f.com>
> ---
> .../bindings/gpio/mstar,msc313-gpio.yaml | 62 +++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 63 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
> new file mode 100644
> index 000000000000..8c7cfe3a51b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/mstar,msc313-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MStar/SigmaStar GPIO controller
> +
> +maintainers:
> + - Daniel Palmer <daniel@thingy.jp>
> +
> +properties:
> + $nodename:
> + pattern: "^gpio@[0-9a-f]+$"
> +
> + compatible:
> + const: mstar,msc313-gpio
> +
> + reg:
> + maxItems: 1
> +
> + gpio-controller: true
> +
> + "#gpio-cells":
> + const: 2
> +
> + gpio-ranges: true
> +
> + gpio-ranges-group-names:
> + $ref: /schemas/types.yaml#/definitions/string-array
Not a standard property. Probably should be dropped, but why do you need
this and what is it for?
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 2
> +
> +required:
> + - compatible
> + - reg
> + - gpio-controller
> + - "#gpio-cells"
> + - interrupt-controller
> + - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/msc313-gpio.h>
> +
> + gpio: gpio@207800 {
> + compatible = "mstar,msc313e-gpio";
> + #gpio-cells = <2>;
> + reg = <0x207800 0x200>;
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 36 22>,
> + <&pinctrl 22 63 4>,
> + <&pinctrl 26 68 6>;
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + interrupt-parent = <&intc_fiq>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index db9c008a0395..87ca71f55de3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2131,6 +2131,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> S: Maintained
> W: http://linux-chenxing.org/
> F: Documentation/devicetree/bindings/arm/mstar/*
> +F: Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
> F: arch/arm/boot/dts/mstar-*
> F: arch/arm/mach-mstar/
> F: include/dt-bindings/gpio/msc313-gpio.h
> --
> 2.29.2
>
next prev parent reply other threads:[~2020-11-11 21:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-09 12:17 [PATCH v3 0/5] Add GPIO support for MStar/SigmaStar ARMv7 Daniel Palmer
2020-11-09 12:17 ` [PATCH v3 1/5] dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver Daniel Palmer
2020-11-11 20:28 ` Rob Herring
2020-11-09 12:17 ` [PATCH v3 2/5] dt-bindings: gpio: Binding for MStar MSC313 GPIO controller Daniel Palmer
2020-11-11 21:06 ` Rob Herring [this message]
2020-11-12 10:57 ` Daniel Palmer
2020-11-09 12:17 ` [PATCH v3 3/5] gpio: msc313: MStar MSC313 GPIO driver Daniel Palmer
2020-11-09 12:17 ` [PATCH v3 4/5] ARM: mstar: Add gpio controller to MStar base dtsi Daniel Palmer
2020-11-09 12:17 ` [PATCH v3 5/5] ARM: mstar: Fill in GPIO controller properties for infinity Daniel Palmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201111210602.GA1974594@bogus \
--to=robh@kernel.org \
--cc=daniel@0x0f.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=soc@kernel.org \
--cc=w@1wt.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).