Re: [PATCH 40/46] dt-bindings:iio:accel:bosch,bma180: txt to yaml format conversion.

[Jonathan Cameron <jic23@jic23.retrosnub.co.uk>]

On Sat, 31 Oct 2020 18:48:48 +0000
Jonathan Cameron <jic23@kernel.org> wrote:

> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> One question in here is whether we want to constrain the number of
> interrupts.  Some parts definitely only have 1 such pin, and others
> 2 pins but I can not find information on the bma254.
> 
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Olkesandr's email address is bouncing so I've listed myself as maintainer
for now.

Applied.

Thanks,

Jonathan

> ---
>  .../devicetree/bindings/iio/accel/bma180.txt  | 35 -----------
>  .../bindings/iio/accel/bosch,bma180.yaml      | 62 +++++++++++++++++++
>  2 files changed, 62 insertions(+), 35 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
> deleted file mode 100644
> index 33da4a6fdb39..000000000000
> --- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor
> -
> -https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf
> -http://omapworld.com/BMA180_111_1002839.pdf
> -http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
> -
> -Required properties:
> -
> -  - compatible : should be one of:
> -    "bosch,bma023"
> -    "bosch,bma150"
> -    "bosch,bma180"
> -    "bosch,bma250"
> -    "bosch,bma254"
> -    "bosch,smb380"
> -  - reg : the I2C address of the sensor
> -  - vdd-supply : regulator phandle connected to the VDD pin
> -  - vddio-supply : regulator phandle connected to the VDDIO pin
> -
> -Optional properties:
> -
> -  - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
> -		flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
> -		For the bma250 the first interrupt listed must be the one
> -		connected to the INT1 pin, the second (optional) interrupt
> -		listed must be the one connected to the INT2 pin.
> -
> -Example:
> -
> -bma180@40 {
> -	compatible = "bosch,bma180";
> -	reg = <0x40>;
> -	interrupt-parent = <&gpio6>;
> -	interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
> -};
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml
> new file mode 100644
> index 000000000000..14e48290ffe3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/bosch,bma180.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial accelerometers
> +
> +maintainers:
> +  - Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
> +
> +description: |
> +  https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf
> +  http://omapworld.com/BMA180_111_1002839.pdf
> +  http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - bosch,bma023
> +      - bosch,bma150
> +      - bosch,bma180
> +      - bosch,bma250
> +      - bosch,bma254
> +      - bosch,smb380
> +
> +  reg:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  vddio-supply: true
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    description: |
> +      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING.
> +      For the bma250 the first interrupt listed must be the one
> +      connected to the INT1 pin, the second (optional) interrupt
> +      listed must be the one connected to the INT2 pin.
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        accel@40 {
> +            compatible = "bosch,bma180";
> +            reg = <0x40>;
> +            interrupt-parent = <&gpio6>;
> +            interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
> +        };
> +    };
> +...