* [PATCH v5] arm64: dts: marvell: add DT for ESPRESSObin-Ultra
@ 2020-10-26 18:44 Vladimir Vid
2020-11-24 0:01 ` Pali Rohár
2020-11-29 11:17 ` Gregory CLEMENT
0 siblings, 2 replies; 4+ messages in thread
From: Vladimir Vid @ 2020-10-26 18:44 UTC (permalink / raw)
To: devicetree
Cc: pali, a.heider, linux-kernel, linux-arm-kernel, tmn505,
sebastian.hesselbarth, gregory.clement, andrew, jason, robh+dt,
Vladimir Vid
This adds support for ESPRESSObin-Ultra from Globalscale.
Specifications are similar to the base ESPRESSObin board, with main
difference being being WAN port with PoE capability and 2 additional ethernet ports.
Full specifications:
1x Marvell 64 bit Dual Core ARM A53 Armada 3700 SOC clocked up to 1.2Ghz
1x Topaz 6341 Networking Switch
1GB DDR4
8GB eMMC
1x WAN with 30W POE
4x Gb LAN
1x RTC Clock and battery
1x DC Jack
1x USB 3.0 Type A
1x USB 2.0 Type A
1x SIM NanoSIM card Slot
1x Power Button
4x LED
1x Reset button
1x microUSB for UART
1x M.2 2280 slot for memory
1x 2x2 802.11ac Wi-Fi
1x MiniPCIE slot for Wi-Fi (PCIe interface)
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
---
v5 changes:
- update ethernet-phy@1 to match reg value
---
arch/arm64/boot/dts/marvell/Makefile | 1 +
.../marvell/armada-3720-espressobin-ultra.dts | 165 ++++++++++++++++++
2 files changed, 166 insertions(+)
create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 3e5f2e7a040c..094f451fdd1d 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -3,6 +3,7 @@
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
new file mode 100644
index 000000000000..c5eb3604dd5b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for ESPRESSObin-Ultra board.
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ *
+ * Jason Hung <jhung@globalscaletechnologies.com>
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+ model = "Globalscale Marvell ESPRESSOBin Ultra Board";
+ compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
+ "marvell,armada3710";
+
+ aliases {
+ /* ethernet1 is WAN port */
+ ethernet1 = &switch0port5;
+ ethernet2 = &switch0port1;
+ ethernet3 = &switch0port2;
+ ethernet4 = &switch0port3;
+ ethernet5 = &switch0port4;
+ };
+
+ reg_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3_phy: usb3-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <®_usb3_vbus>;
+ };
+
+ gpio-leds {
+ pinctrl-names = "default";
+ compatible = "gpio-leds";
+ /* No assigned functions to the LEDs by default */
+ led1 {
+ label = "ebin-ultra:blue:led1";
+ gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+ };
+ led2 {
+ label = "ebin-ultra:green:led2";
+ gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+ };
+ led3 {
+ label = "ebin-ultra:red:led3";
+ gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+ };
+ led4 {
+ label = "ebin-ultra:yellow:led4";
+ gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "disabled";
+};
+
+&spi0 {
+ flash@0 {
+ spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x3e0000>;
+ };
+ partition@3e0000 {
+ label = "hw-info";
+ reg = <0x3e0000 0x10000>;
+ read-only;
+ };
+ partition@3f0000 {
+ label = "u-boot-env";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <100000>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&usb3 {
+ usb-phy = <&usb3_phy>;
+ status = "disabled";
+};
+
+&mdio {
+ extphy: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&switch0 {
+ reg = <3>;
+
+ ports {
+ switch0port1: port@1 {
+ reg = <1>;
+ label = "lan0";
+ phy-handle = <&switch0phy0>;
+ };
+
+ switch0port2: port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ };
+
+ switch0port3: port@3 {
+ reg = <3>;
+ label = "lan2";
+ phy-handle = <&switch0phy2>;
+ };
+
+ switch0port4: port@4 {
+ reg = <4>;
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ };
+
+ switch0port5: port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-handle = <&extphy>;
+ phy-mode = "sgmii";
+ };
+ };
+
+ mdio {
+ switch0phy3: switch0phy3@14 {
+ reg = <0x14>;
+ };
+ };
+};
--
2.27.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v5] arm64: dts: marvell: add DT for ESPRESSObin-Ultra
2020-10-26 18:44 [PATCH v5] arm64: dts: marvell: add DT for ESPRESSObin-Ultra Vladimir Vid
@ 2020-11-24 0:01 ` Pali Rohár
2020-11-29 11:17 ` Gregory CLEMENT
1 sibling, 0 replies; 4+ messages in thread
From: Pali Rohár @ 2020-11-24 0:01 UTC (permalink / raw)
To: Vladimir Vid
Cc: devicetree, a.heider, linux-kernel, linux-arm-kernel, tmn505,
sebastian.hesselbarth, gregory.clement, andrew, jason, robh+dt
On Monday 26 October 2020 19:44:42 Vladimir Vid wrote:
> This adds support for ESPRESSObin-Ultra from Globalscale.
>
> Specifications are similar to the base ESPRESSObin board, with main
> difference being being WAN port with PoE capability and 2 additional ethernet ports.
>
> Full specifications:
>
> 1x Marvell 64 bit Dual Core ARM A53 Armada 3700 SOC clocked up to 1.2Ghz
> 1x Topaz 6341 Networking Switch
> 1GB DDR4
> 8GB eMMC
> 1x WAN with 30W POE
> 4x Gb LAN
> 1x RTC Clock and battery
> 1x DC Jack
> 1x USB 3.0 Type A
> 1x USB 2.0 Type A
> 1x SIM NanoSIM card Slot
> 1x Power Button
> 4x LED
> 1x Reset button
> 1x microUSB for UART
> 1x M.2 2280 slot for memory
> 1x 2x2 802.11ac Wi-Fi
> 1x MiniPCIE slot for Wi-Fi (PCIe interface)
>
> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Looks good now! The only missing part is to enable usb3 node. Have you
looked at fixing usb3 port?
> ---
>
> v5 changes:
> - update ethernet-phy@1 to match reg value
>
> ---
> arch/arm64/boot/dts/marvell/Makefile | 1 +
> .../marvell/armada-3720-espressobin-ultra.dts | 165 ++++++++++++++++++
> 2 files changed, 166 insertions(+)
> create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
>
> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
> index 3e5f2e7a040c..094f451fdd1d 100644
> --- a/arch/arm64/boot/dts/marvell/Makefile
> +++ b/arch/arm64/boot/dts/marvell/Makefile
> @@ -3,6 +3,7 @@
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> new file mode 100644
> index 000000000000..c5eb3604dd5b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> @@ -0,0 +1,165 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree file for ESPRESSObin-Ultra board.
> + * Copyright (C) 2019 Globalscale technologies, Inc.
> + *
> + * Jason Hung <jhung@globalscaletechnologies.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "armada-3720-espressobin.dtsi"
> +
> +/ {
> + model = "Globalscale Marvell ESPRESSOBin Ultra Board";
> + compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
> + "marvell,armada3710";
> +
> + aliases {
> + /* ethernet1 is WAN port */
> + ethernet1 = &switch0port5;
> + ethernet2 = &switch0port1;
> + ethernet3 = &switch0port2;
> + ethernet4 = &switch0port3;
> + ethernet5 = &switch0port4;
> + };
> +
> + reg_usb3_vbus: usb3-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb3-vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
> + };
> +
> + usb3_phy: usb3-phy {
> + compatible = "usb-nop-xceiv";
> + vcc-supply = <®_usb3_vbus>;
> + };
> +
> + gpio-leds {
> + pinctrl-names = "default";
> + compatible = "gpio-leds";
> + /* No assigned functions to the LEDs by default */
> + led1 {
> + label = "ebin-ultra:blue:led1";
> + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
> + };
> + led2 {
> + label = "ebin-ultra:green:led2";
> + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
> + };
> + led3 {
> + label = "ebin-ultra:red:led3";
> + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
> + };
> + led4 {
> + label = "ebin-ultra:yellow:led4";
> + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&sdhci0 {
> + status = "okay";
> +};
> +
> +&sdhci1 {
> + status = "disabled";
> +};
> +
> +&spi0 {
> + flash@0 {
> + spi-max-frequency = <108000000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "firmware";
> + reg = <0x0 0x3e0000>;
> + };
> + partition@3e0000 {
> + label = "hw-info";
> + reg = <0x3e0000 0x10000>;
> + read-only;
> + };
> + partition@3f0000 {
> + label = "u-boot-env";
> + reg = <0x3f0000 0x10000>;
> + };
> + };
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> +
> + clock-frequency = <100000>;
> +
> + rtc@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +};
> +
> +&usb3 {
> + usb-phy = <&usb3_phy>;
> + status = "disabled";
> +};
> +
> +&mdio {
> + extphy: ethernet-phy@1 {
> + reg = <1>;
> + };
> +};
> +
> +&switch0 {
> + reg = <3>;
> +
> + ports {
> + switch0port1: port@1 {
> + reg = <1>;
> + label = "lan0";
> + phy-handle = <&switch0phy0>;
> + };
> +
> + switch0port2: port@2 {
> + reg = <2>;
> + label = "lan1";
> + phy-handle = <&switch0phy1>;
> + };
> +
> + switch0port3: port@3 {
> + reg = <3>;
> + label = "lan2";
> + phy-handle = <&switch0phy2>;
> + };
> +
> + switch0port4: port@4 {
> + reg = <4>;
> + label = "lan3";
> + phy-handle = <&switch0phy3>;
> + };
> +
> + switch0port5: port@5 {
> + reg = <5>;
> + label = "wan";
> + phy-handle = <&extphy>;
> + phy-mode = "sgmii";
> + };
> + };
> +
> + mdio {
> + switch0phy3: switch0phy3@14 {
> + reg = <0x14>;
> + };
> + };
> +};
> --
> 2.27.0
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v5] arm64: dts: marvell: add DT for ESPRESSObin-Ultra
2020-10-26 18:44 [PATCH v5] arm64: dts: marvell: add DT for ESPRESSObin-Ultra Vladimir Vid
2020-11-24 0:01 ` Pali Rohár
@ 2020-11-29 11:17 ` Gregory CLEMENT
2020-12-04 0:48 ` Pali Rohár
1 sibling, 1 reply; 4+ messages in thread
From: Gregory CLEMENT @ 2020-11-29 11:17 UTC (permalink / raw)
To: Vladimir Vid, devicetree
Cc: pali, a.heider, linux-kernel, linux-arm-kernel, tmn505,
sebastian.hesselbarth, andrew, jason, robh+dt, Vladimir Vid
Hi Vladimir,
> This adds support for ESPRESSObin-Ultra from Globalscale.
>
> Specifications are similar to the base ESPRESSObin board, with main
> difference being being WAN port with PoE capability and 2 additional ethernet ports.
>
> Full specifications:
>
> 1x Marvell 64 bit Dual Core ARM A53 Armada 3700 SOC clocked up to 1.2Ghz
> 1x Topaz 6341 Networking Switch
> 1GB DDR4
> 8GB eMMC
> 1x WAN with 30W POE
> 4x Gb LAN
> 1x RTC Clock and battery
> 1x DC Jack
> 1x USB 3.0 Type A
> 1x USB 2.0 Type A
> 1x SIM NanoSIM card Slot
> 1x Power Button
> 4x LED
> 1x Reset button
> 1x microUSB for UART
> 1x M.2 2280 slot for memory
> 1x 2x2 802.11ac Wi-Fi
> 1x MiniPCIE slot for Wi-Fi (PCIe interface)
>
> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Applied on mvebu/dt64
I know that usb3 node is not yet enabled but we are a really close to the
end of the merge window for ARM so let's have this version in 5.11, and
then we can improve it in future version.
Thanks,
Gregory
> ---
>
> v5 changes:
> - update ethernet-phy@1 to match reg value
>
> ---
> arch/arm64/boot/dts/marvell/Makefile | 1 +
> .../marvell/armada-3720-espressobin-ultra.dts | 165 ++++++++++++++++++
> 2 files changed, 166 insertions(+)
> create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
>
> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
> index 3e5f2e7a040c..094f451fdd1d 100644
> --- a/arch/arm64/boot/dts/marvell/Makefile
> +++ b/arch/arm64/boot/dts/marvell/Makefile
> @@ -3,6 +3,7 @@
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> new file mode 100644
> index 000000000000..c5eb3604dd5b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> @@ -0,0 +1,165 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree file for ESPRESSObin-Ultra board.
> + * Copyright (C) 2019 Globalscale technologies, Inc.
> + *
> + * Jason Hung <jhung@globalscaletechnologies.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "armada-3720-espressobin.dtsi"
> +
> +/ {
> + model = "Globalscale Marvell ESPRESSOBin Ultra Board";
> + compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
> + "marvell,armada3710";
> +
> + aliases {
> + /* ethernet1 is WAN port */
> + ethernet1 = &switch0port5;
> + ethernet2 = &switch0port1;
> + ethernet3 = &switch0port2;
> + ethernet4 = &switch0port3;
> + ethernet5 = &switch0port4;
> + };
> +
> + reg_usb3_vbus: usb3-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb3-vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
> + };
> +
> + usb3_phy: usb3-phy {
> + compatible = "usb-nop-xceiv";
> + vcc-supply = <®_usb3_vbus>;
> + };
> +
> + gpio-leds {
> + pinctrl-names = "default";
> + compatible = "gpio-leds";
> + /* No assigned functions to the LEDs by default */
> + led1 {
> + label = "ebin-ultra:blue:led1";
> + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
> + };
> + led2 {
> + label = "ebin-ultra:green:led2";
> + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
> + };
> + led3 {
> + label = "ebin-ultra:red:led3";
> + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
> + };
> + led4 {
> + label = "ebin-ultra:yellow:led4";
> + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&sdhci0 {
> + status = "okay";
> +};
> +
> +&sdhci1 {
> + status = "disabled";
> +};
> +
> +&spi0 {
> + flash@0 {
> + spi-max-frequency = <108000000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "firmware";
> + reg = <0x0 0x3e0000>;
> + };
> + partition@3e0000 {
> + label = "hw-info";
> + reg = <0x3e0000 0x10000>;
> + read-only;
> + };
> + partition@3f0000 {
> + label = "u-boot-env";
> + reg = <0x3f0000 0x10000>;
> + };
> + };
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> +
> + clock-frequency = <100000>;
> +
> + rtc@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +};
> +
> +&usb3 {
> + usb-phy = <&usb3_phy>;
> + status = "disabled";
> +};
> +
> +&mdio {
> + extphy: ethernet-phy@1 {
> + reg = <1>;
> + };
> +};
> +
> +&switch0 {
> + reg = <3>;
> +
> + ports {
> + switch0port1: port@1 {
> + reg = <1>;
> + label = "lan0";
> + phy-handle = <&switch0phy0>;
> + };
> +
> + switch0port2: port@2 {
> + reg = <2>;
> + label = "lan1";
> + phy-handle = <&switch0phy1>;
> + };
> +
> + switch0port3: port@3 {
> + reg = <3>;
> + label = "lan2";
> + phy-handle = <&switch0phy2>;
> + };
> +
> + switch0port4: port@4 {
> + reg = <4>;
> + label = "lan3";
> + phy-handle = <&switch0phy3>;
> + };
> +
> + switch0port5: port@5 {
> + reg = <5>;
> + label = "wan";
> + phy-handle = <&extphy>;
> + phy-mode = "sgmii";
> + };
> + };
> +
> + mdio {
> + switch0phy3: switch0phy3@14 {
> + reg = <0x14>;
> + };
> + };
> +};
> --
> 2.27.0
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v5] arm64: dts: marvell: add DT for ESPRESSObin-Ultra
2020-11-29 11:17 ` Gregory CLEMENT
@ 2020-12-04 0:48 ` Pali Rohár
0 siblings, 0 replies; 4+ messages in thread
From: Pali Rohár @ 2020-12-04 0:48 UTC (permalink / raw)
To: Gregory CLEMENT
Cc: Vladimir Vid, devicetree, a.heider, linux-kernel,
linux-arm-kernel, tmn505, sebastian.hesselbarth, andrew, jason,
robh+dt
On Sunday 29 November 2020 12:17:27 Gregory CLEMENT wrote:
> Hi Vladimir,
>
> > This adds support for ESPRESSObin-Ultra from Globalscale.
> >
> > Specifications are similar to the base ESPRESSObin board, with main
> > difference being being WAN port with PoE capability and 2 additional ethernet ports.
> >
> > Full specifications:
> >
> > 1x Marvell 64 bit Dual Core ARM A53 Armada 3700 SOC clocked up to 1.2Ghz
> > 1x Topaz 6341 Networking Switch
> > 1GB DDR4
> > 8GB eMMC
> > 1x WAN with 30W POE
> > 4x Gb LAN
> > 1x RTC Clock and battery
> > 1x DC Jack
> > 1x USB 3.0 Type A
> > 1x USB 2.0 Type A
> > 1x SIM NanoSIM card Slot
> > 1x Power Button
> > 4x LED
> > 1x Reset button
> > 1x microUSB for UART
> > 1x M.2 2280 slot for memory
> > 1x 2x2 802.11ac Wi-Fi
> > 1x MiniPCIE slot for Wi-Fi (PCIe interface)
> >
> > Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
>
>
> Applied on mvebu/dt64
>
> I know that usb3 node is not yet enabled but we are a really close to the
> end of the merge window for ARM so let's have this version in 5.11, and
> then we can improve it in future version.
Maybe you could include into commit message that USB3 support is
currently missing? As from current commit message description it looks
like it is there...
> Thanks,
>
> Gregory
>
> > ---
> >
> > v5 changes:
> > - update ethernet-phy@1 to match reg value
> >
> > ---
> > arch/arm64/boot/dts/marvell/Makefile | 1 +
> > .../marvell/armada-3720-espressobin-ultra.dts | 165 ++++++++++++++++++
> > 2 files changed, 166 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> >
> > diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
> > index 3e5f2e7a040c..094f451fdd1d 100644
> > --- a/arch/arm64/boot/dts/marvell/Makefile
> > +++ b/arch/arm64/boot/dts/marvell/Makefile
> > @@ -3,6 +3,7 @@
> > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
> > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
> > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
> > +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
> > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
> > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
> > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
> > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> > new file mode 100644
> > index 000000000000..c5eb3604dd5b
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> > @@ -0,0 +1,165 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Device Tree file for ESPRESSObin-Ultra board.
> > + * Copyright (C) 2019 Globalscale technologies, Inc.
> > + *
> > + * Jason Hung <jhung@globalscaletechnologies.com>
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "armada-3720-espressobin.dtsi"
> > +
> > +/ {
> > + model = "Globalscale Marvell ESPRESSOBin Ultra Board";
> > + compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
> > + "marvell,armada3710";
> > +
> > + aliases {
> > + /* ethernet1 is WAN port */
> > + ethernet1 = &switch0port5;
> > + ethernet2 = &switch0port1;
> > + ethernet3 = &switch0port2;
> > + ethernet4 = &switch0port3;
> > + ethernet5 = &switch0port4;
> > + };
> > +
> > + reg_usb3_vbus: usb3-vbus {
> > + compatible = "regulator-fixed";
> > + regulator-name = "usb3-vbus";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + enable-active-high;
> > + gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + usb3_phy: usb3-phy {
> > + compatible = "usb-nop-xceiv";
> > + vcc-supply = <®_usb3_vbus>;
> > + };
> > +
> > + gpio-leds {
> > + pinctrl-names = "default";
> > + compatible = "gpio-leds";
> > + /* No assigned functions to the LEDs by default */
> > + led1 {
> > + label = "ebin-ultra:blue:led1";
> > + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
> > + };
> > + led2 {
> > + label = "ebin-ultra:green:led2";
> > + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
> > + };
> > + led3 {
> > + label = "ebin-ultra:red:led3";
> > + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
> > + };
> > + led4 {
> > + label = "ebin-ultra:yellow:led4";
> > + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
> > + };
> > + };
> > +};
> > +
> > +&sdhci0 {
> > + status = "okay";
> > +};
> > +
> > +&sdhci1 {
> > + status = "disabled";
> > +};
> > +
> > +&spi0 {
> > + flash@0 {
> > + spi-max-frequency = <108000000>;
> > + spi-rx-bus-width = <4>;
> > + spi-tx-bus-width = <4>;
> > +
> > + partitions {
> > + compatible = "fixed-partitions";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + partition@0 {
> > + label = "firmware";
> > + reg = <0x0 0x3e0000>;
> > + };
> > + partition@3e0000 {
> > + label = "hw-info";
> > + reg = <0x3e0000 0x10000>;
> > + read-only;
> > + };
> > + partition@3f0000 {
> > + label = "u-boot-env";
> > + reg = <0x3f0000 0x10000>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c1_pins>;
> > +
> > + clock-frequency = <100000>;
> > +
> > + rtc@51 {
> > + compatible = "nxp,pcf8563";
> > + reg = <0x51>;
> > + };
> > +};
> > +
> > +&usb3 {
> > + usb-phy = <&usb3_phy>;
> > + status = "disabled";
> > +};
> > +
> > +&mdio {
> > + extphy: ethernet-phy@1 {
> > + reg = <1>;
> > + };
> > +};
> > +
> > +&switch0 {
> > + reg = <3>;
> > +
> > + ports {
> > + switch0port1: port@1 {
> > + reg = <1>;
> > + label = "lan0";
> > + phy-handle = <&switch0phy0>;
> > + };
> > +
> > + switch0port2: port@2 {
> > + reg = <2>;
> > + label = "lan1";
> > + phy-handle = <&switch0phy1>;
> > + };
> > +
> > + switch0port3: port@3 {
> > + reg = <3>;
> > + label = "lan2";
> > + phy-handle = <&switch0phy2>;
> > + };
> > +
> > + switch0port4: port@4 {
> > + reg = <4>;
> > + label = "lan3";
> > + phy-handle = <&switch0phy3>;
> > + };
> > +
> > + switch0port5: port@5 {
> > + reg = <5>;
> > + label = "wan";
> > + phy-handle = <&extphy>;
> > + phy-mode = "sgmii";
> > + };
> > + };
> > +
> > + mdio {
> > + switch0phy3: switch0phy3@14 {
> > + reg = <0x14>;
> > + };
> > + };
> > +};
> > --
> > 2.27.0
> >
>
> --
> Gregory Clement, Bootlin
> Embedded Linux and Kernel engineering
> http://bootlin.com
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-12-04 0:49 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-26 18:44 [PATCH v5] arm64: dts: marvell: add DT for ESPRESSObin-Ultra Vladimir Vid
2020-11-24 0:01 ` Pali Rohár
2020-11-29 11:17 ` Gregory CLEMENT
2020-12-04 0:48 ` Pali Rohár
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).