From: Samuel Holland <samuel@sholland.org>
To: Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@siol.net>,
Russell King <linux@armlinux.org.uk>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: Ondrej Jirman <megous@megous.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
Samuel Holland <samuel@sholland.org>
Subject: [PATCH v3 08/10] ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc
Date: Sun, 3 Jan 2021 04:30:59 -0600 [thread overview]
Message-ID: <20210103103101.33603-9-samuel@sholland.org> (raw)
In-Reply-To: <20210103103101.33603-1-samuel@sholland.org>
All IRQs that can be used to wake up the system must be routed through
r_intc, so they are visible to firmware while the system is suspended.
In addition to the external NMI input, which is already routed through
r_intc, these include PIO and R_PIO (gpio-keys), the LRADC, and the RTC.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++++
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 4 ++++
arch/arm/boot/dts/sun8i-a83t.dtsi | 3 +++
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 3 +++
4 files changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index faf85c5f4e1e..50324688c28a 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -611,6 +611,7 @@ ccu: clock@1c20000 {
pio: pinctrl@1c20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
reg = <0x01c20800 0x400>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
@@ -802,6 +803,7 @@ i2s1: i2s@1c22400 {
lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -1299,6 +1301,7 @@ rtc: rtc@1f00000 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc32k>;
@@ -1383,6 +1386,7 @@ ir: ir@1f02000 {
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun6i-a31-r-pinctrl";
reg = <0x01f02c00 0x400>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index a84c90a660ca..4461d5098b20 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -338,6 +338,7 @@ ccu: clock@1c20000 {
pio: pinctrl@1c20800 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c20800 0x400>;
+ interrupt-parent = <&r_intc>;
/* interrupts get set in SoC specific dtsi file */
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
@@ -473,6 +474,7 @@ pwm: pwm@1c21400 {
lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -709,6 +711,7 @@ drc0_out_tcon0: endpoint {
rtc: rtc@1f00000 {
compatible = "allwinner,sun8i-a23-rtc";
reg = <0x01f00000 0x400>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k", "osc32k-out";
@@ -805,6 +808,7 @@ r_i2c: i2c@1f02400 {
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a23-r-pinctrl";
reg = <0x01f02c00 0x400>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 0fce227f56d4..2c05e296b3d8 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -708,6 +708,7 @@ ccu: clock@1c20000 {
pio: pinctrl@1c20800 {
compatible = "allwinner,sun8i-a83t-pinctrl";
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
@@ -1150,6 +1151,7 @@ r_cir: ir@1f02000 {
r_lradc: lradc@1f03c00 {
compatible = "allwinner,sun8i-a83t-r-lradc";
reg = <0x01f03c00 0x100>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -1157,6 +1159,7 @@ r_lradc: lradc@1f03c00 {
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
<&osc16Md512>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 4bf25c5b873e..c7428df9469e 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -395,6 +395,7 @@ ccu: clock@1c20000 {
pio: pinctrl@1c20800 {
/* compatible is in per SoC .dtsi file */
reg = <0x01c20800 0x400>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
@@ -852,6 +853,7 @@ hdmi_phy: hdmi-phy@1ef0000 {
rtc: rtc@1f00000 {
/* compatible is in per SoC .dtsi file */
reg = <0x01f00000 0x400>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k", "osc32k-out", "iosc";
@@ -909,6 +911,7 @@ r_i2c: i2c@1f02400 {
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
+ interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
--
2.26.2
next prev parent reply other threads:[~2021-01-03 10:32 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-03 10:30 [PATCH v3 00/10] sunxi: Support IRQ wakeup from deep sleep Samuel Holland
2021-01-03 10:30 ` [PATCH v3 01/10] dt-bindings: irq: sun6i-r: Split the binding from sun7i-nmi Samuel Holland
2021-01-08 9:44 ` Maxime Ripard
2021-01-08 15:40 ` Samuel Holland
2021-01-11 22:29 ` Rob Herring
2021-01-03 10:30 ` [PATCH v3 02/10] dt-bindings: irq: sun6i-r: Add a compatible for the H3 Samuel Holland
2021-01-11 22:29 ` Rob Herring
2021-01-03 10:30 ` [PATCH v3 03/10] irqchip/sun6i-r: Use a stacked irqchip driver Samuel Holland
2021-01-03 11:27 ` Marc Zyngier
2021-01-03 12:08 ` Samuel Holland
2021-01-03 13:10 ` Marc Zyngier
2021-01-04 3:46 ` Samuel Holland
2021-01-04 10:03 ` Marc Zyngier
2021-01-03 10:30 ` [PATCH v3 04/10] irqchip/sun6i-r: Add wakeup support Samuel Holland
2021-01-03 10:30 ` [PATCH v3 05/10] ARM: dts: sunxi: Rename nmi_intc to r_intc Samuel Holland
2021-01-03 10:30 ` [PATCH v3 06/10] ARM: dts: sunxi: Use the new r_intc binding Samuel Holland
2021-01-03 10:30 ` [PATCH v3 07/10] ARM: dts: sunxi: h3/h5: Add r_intc node Samuel Holland
2021-01-03 10:30 ` Samuel Holland [this message]
2021-01-03 10:31 ` [PATCH v3 09/10] arm64: dts: allwinner: Use the new r_intc binding Samuel Holland
2021-01-03 10:31 ` [PATCH v3 10/10] arm64: dts: allwinner: Move wakeup-capable IRQs to r_intc Samuel Holland
2021-01-03 12:16 ` [PATCH v3 00/10] sunxi: Support IRQ wakeup from deep sleep Marc Zyngier
2021-01-03 12:43 ` Samuel Holland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210103103101.33603-9-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@siol.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=maz@kernel.org \
--cc=megous@megous.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=wens@csie.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).