Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Kieran Bingham <kieran.bingham@ideasonboard.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 1/7] dt-bindings: media: max9286: Re-indent example
Date: Thu, 15 Apr 2021 14:25:56 +0200
Message-ID: <20210415122602.87697-2-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20210415122602.87697-1-jacopo+renesas@jmondi.org>

The dt-bindings examples are usually indented with 4 spaces.

The maxim,max9286 schema has the example indented with only
2 spaces, re-indent it.

Cosmetic change only.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 .../bindings/media/i2c/maxim,max9286.yaml     | 214 +++++++++---------
 1 file changed, 107 insertions(+), 107 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index ee16102fdfe7..0e7162998b77 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -191,140 +191,140 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     i2c@e66d8000 {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-      reg = <0 0xe66d8000>;
+        reg = <0 0xe66d8000>;
 
-      gmsl-deserializer@2c {
-        compatible = "maxim,max9286";
-        reg = <0x2c>;
-        poc-supply = <&camera_poc_12v>;
-        enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+        gmsl-deserializer@2c {
+            compatible = "maxim,max9286";
+            reg = <0x2c>;
+            poc-supply = <&camera_poc_12v>;
+            enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
 
-        gpio-controller;
-        #gpio-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
 
-        maxim,reverse-channel-microvolt = <170000>;
+            maxim,reverse-channel-microvolt = <170000>;
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
+                port@0 {
+                    reg = <0>;
 
-            max9286_in0: endpoint {
-              remote-endpoint = <&rdacm20_out0>;
-            };
-          };
-
-          port@1 {
-            reg = <1>;
-
-            max9286_in1: endpoint {
-              remote-endpoint = <&rdacm20_out1>;
-            };
-          };
-
-          port@2 {
-            reg = <2>;
-
-            max9286_in2: endpoint {
-              remote-endpoint = <&rdacm20_out2>;
-            };
-          };
+                    max9286_in0: endpoint {
+                        remote-endpoint = <&rdacm20_out0>;
+                    };
+                };
 
-          port@3 {
-            reg = <3>;
+                port@1 {
+                    reg = <1>;
 
-            max9286_in3: endpoint {
-              remote-endpoint = <&rdacm20_out3>;
-            };
-          };
+                    max9286_in1: endpoint {
+                        remote-endpoint = <&rdacm20_out1>;
+                    };
+                };
 
-          port@4 {
-            reg = <4>;
+                port@2 {
+                    reg = <2>;
 
-            max9286_out: endpoint {
-              data-lanes = <1 2 3 4>;
-              remote-endpoint = <&csi40_in>;
-            };
-          };
-        };
+                    max9286_in2: endpoint {
+                        remote-endpoint = <&rdacm20_out2>;
+                    };
+                };
 
-        i2c-mux {
-          #address-cells = <1>;
-          #size-cells = <0>;
+                port@3 {
+                    reg = <3>;
 
-          i2c@0 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <0>;
+                    max9286_in3: endpoint {
+                        remote-endpoint = <&rdacm20_out3>;
+                    };
+                };
 
-            camera@51 {
-              compatible = "imi,rdacm20";
-              reg = <0x51>, <0x61>;
+                port@4 {
+                    reg = <4>;
 
-              port {
-                rdacm20_out0: endpoint {
-                  remote-endpoint = <&max9286_in0>;
+                    max9286_out: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
                 };
-              };
-
             };
-          };
-
-          i2c@1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <1>;
 
-            camera@52 {
-              compatible = "imi,rdacm20";
-              reg = <0x52>, <0x62>;
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-              port {
-                rdacm20_out1: endpoint {
-                  remote-endpoint = <&max9286_in1>;
-                };
-              };
-            };
-          };
+                i2c@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
 
-          i2c@2 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <2>;
+                    camera@51 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x51>, <0x61>;
 
-            camera@53 {
-              compatible = "imi,rdacm20";
-              reg = <0x53>, <0x63>;
+                        port {
+                            rdacm20_out0: endpoint {
+                                remote-endpoint = <&max9286_in0>;
+                            };
+                        };
 
-              port {
-                rdacm20_out2: endpoint {
-                  remote-endpoint = <&max9286_in2>;
+                    };
                 };
-              };
-            };
-          };
 
-          i2c@3 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <3>;
+                i2c@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    camera@52 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x52>, <0x62>;
+
+                        port {
+                            rdacm20_out1: endpoint {
+                                remote-endpoint = <&max9286_in1>;
+                            };
+                        };
+                    };
+                };
 
-            camera@54 {
-              compatible = "imi,rdacm20";
-              reg = <0x54>, <0x64>;
+                i2c@2 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <2>;
+
+                    camera@53 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x53>, <0x63>;
+
+                        port {
+                            rdacm20_out2: endpoint {
+                                remote-endpoint = <&max9286_in2>;
+                            };
+                        };
+                    };
+                };
 
-              port {
-                rdacm20_out3: endpoint {
-                  remote-endpoint = <&max9286_in3>;
+                i2c@3 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <3>;
+
+                    camera@54 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x54>, <0x64>;
+
+                        port {
+                            rdacm20_out3: endpoint {
+                                remote-endpoint = <&max9286_in3>;
+                            };
+                        };
+                    };
                 };
-              };
             };
-          };
         };
-      };
     };
-- 
2.31.1


  reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-15 12:25 [PATCH v4 0/7] arm64: dts: renesas: Enable GMSL on R8A77970 V3M Eagle Jacopo Mondi
2021-04-15 12:25 ` Jacopo Mondi [this message]
2021-04-15 14:42   ` [PATCH v4 1/7] dt-bindings: media: max9286: Re-indent example Laurent Pinchart
2021-04-15 16:40   ` Rob Herring
2021-04-15 12:25 ` [PATCH v4 2/7] dt-bindings: media: max9286: Define 'maxim,gpio-poc' Jacopo Mondi
2021-04-15 16:53   ` Rob Herring
2021-04-15 12:25 ` [PATCH v4 3/7] media: i2c: max9286: Use "maxim,gpio-poc" property Jacopo Mondi
2021-04-15 19:19   ` Laurent Pinchart
2021-04-18 15:01     ` Jacopo Mondi
2021-04-15 12:25 ` [PATCH v4 4/7] arm64: dts: renesas: r8a77970: Add csi40 port@0 Jacopo Mondi
2021-04-15 14:47   ` Laurent Pinchart
2021-04-15 16:47     ` Geert Uytterhoeven
2021-04-15 19:09       ` Laurent Pinchart
2021-04-15 12:26 ` [PATCH v4 5/7] arm64: dts: renesas: eagle: Enable MAX9286 Jacopo Mondi
2021-04-15 12:26 ` [PATCH v4 6/7] arm64: dts: renesas: eagle: Add GMSL .dtsi Jacopo Mondi
2021-04-15 12:26 ` [PATCH v4 7/7] DNI: arm64: dts: renesas: eagle: Include eagle-gmsl Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210415122602.87697-2-jacopo+renesas@jmondi.org \
    --to=jacopo+renesas@jmondi.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git
	git clone --mirror https://lore.kernel.org/linux-devicetree/1 linux-devicetree/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git