devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chris Morgan <macroalpha82@gmail.com>
To: alsa-devel@alsa-project.org
Cc: broonie@kernel.org, lgirdwood@gmail.com,
	pierre-louis.bossart@linux.intel.com, tiwai@suse.com,
	heiko@sntech.de, lee.jones@linaro.org, robh+dt@kernel.org,
	perex@perex.cz, jbx6244@gmail.com, devicetree@vger.kernel.org,
	linux-rockchip@lists.infradead.org, maccraft123mc@gmail.com,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [v8 3/4] dt-bindings: Add Rockchip rk817 audio CODEC support
Date: Wed, 21 Apr 2021 12:59:05 -0500	[thread overview]
Message-ID: <20210421175906.31977-3-macroalpha82@gmail.com> (raw)
In-Reply-To: <20210421175906.31977-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Create dt-binding documentation to document rk817 codec.
New property name of rockchip,mic-in-differential added to control if
the microphone is in differential mode or not.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
Changes in v8:
 - Added additional documentation for missing properties of #sound-dai-cells,
   interrupt-parent, and wakeup-source for mfd documentation.
 - Corrected order of elements descriptions in device tree documentation.
 - Changed name of "mic-in-differential" to "rockchip,mic-in-differential".
 - Changed name of sound card from "rockchip,rk817-codec" to "Analog".
 - Removed unused resets and reset-names from the i2s1_2ch node.
Changes in v7:
 - Removed ifdef around register definitions for MFD.
 - Replaced codec documentation with updates to MFD documentation.
 - Reordered elements in example to comply with upstream rules.
 - Added binding update back for Odroid Go Advance as requested.
 - Submitting patches from gmail now.
Changes in v6:
 - Included additional project maintainers for correct subsystems.
 - Removed unneeded compatible from DT documentation.
 - Removed binding update for Odroid Go Advance (will do in seperate series).
Changes in v5:
 - Move register definitions from rk817_codec.h to main rk808.h register
   definitions.
 - Add volatile register for codec bits.
 - Add default values for codec bits.
 - Removed of_compatible from mtd driver (not necessary).
 - Switched to using parent regmap instead of private regmap for codec.
Changes in v4:
 - Created set_pll() call.
 - Created user visible gain control in mic.
 - Check for return value of clk_prepare_enable().
 - Removed duplicate clk_prepare_enable().
 - Split DT documentation to separate commit.
Changes in v3:
 - Use DAPM macros to set audio path.
 - Updated devicetree binding (as every rk817 has this codec chip).
 - Changed documentation to yaml format.
 - Split MFD changes to separate commit.
Changes in v2:
 - Fixed audio path registers to solve some bugs.

 .../devicetree/bindings/mfd/rk808.txt         | 188 ++++++++++++++++++
 1 file changed, 188 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 04df07f6f793..e27fb2c1ebe0 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -14,6 +14,8 @@ Required properties:
 - compatible: "rockchip,rk817"
 - compatible: "rockchip,rk818"
 - reg: I2C slave address
+- interrupt-parent: Should contain a phandle to the correct interrupt
+		    controller node.
 - interrupts: the interrupt outputs of the controller.
 - #clock-cells: from common clock binding; shall be set to 1 (multiple clock
   outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
@@ -23,6 +25,7 @@ Optional properties:
   default output clock name
 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
   the system power.
+- wakeup-source: Device can be used as a wakeup source.
 
 Optional RK805 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
@@ -63,8 +66,16 @@ Optional RK809 properties:
 - vcc9-supply:  The input supply for DCDC_REG5, SWITCH_REG2
 
 Optional RK817 properties:
+- clocks:	The input clock for the audio codec
+- clock-names:	The clock name for the codec clock. Should be "mclk".
+- #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0.
+
 - vcc8-supply:  The input supply for BOOST
 - vcc9-supply:  The input supply for OTG_SWITCH
+- codec:	The child node for the codec to hold additional properties.
+
+- rockchip,mic-in-differential: Telling if the microphone uses differential
+				mode. Should be under the codec child node.
 
 Optional RK818 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
@@ -275,3 +286,180 @@ Example:
 			};
 		};
 	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_cam: LDO_REG9 {
+				regulator-name = "vcc_cam";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
-- 
2.25.1


  parent reply	other threads:[~2021-04-21 17:59 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-21 17:59 [v8 1/4] mfd: Add Rockchip rk817 audio CODEC support Chris Morgan
2021-04-21 17:59 ` [v8 2/4] ASoC: " Chris Morgan
2021-04-21 17:59 ` Chris Morgan [this message]
2021-04-23 17:38   ` [v8 3/4] dt-bindings: " Rob Herring
2021-04-21 17:59 ` [v8 4/4] arm64: dts: rockchip: add rk817 codec to Odroid Go Chris Morgan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210421175906.31977-3-macroalpha82@gmail.com \
    --to=macroalpha82@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=jbx6244@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=maccraft123mc@gmail.com \
    --cc=macromorgan@hotmail.com \
    --cc=perex@perex.cz \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).