From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: broonie@kernel.org
Cc: robh@kernel.org, devicetree@vger.kernel.org, perex@perex.cz,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
lgirdwood@gmail.com,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v9 0/9] ASoC: codecs: add wcd938x support
Date: Wed, 9 Jun 2021 10:09:34 +0100 [thread overview]
Message-ID: <20210609090943.7896-1-srinivas.kandagatla@linaro.org> (raw)
This patchset adds support for Qualcomm WCD938X codec.
Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire devices, RX and
TX respectively supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
7 x TX diff inputs, 8 DMICs and MBHC.
Eventhough this device has two SoundWire devices, only tx device has
access to main codec Control/Status Registers!
For codec driver to be functional it would need both tx and rx Soundwire devices
to be up and this is taken care by using device component framework and device-links
are used to ensure proper pm dependencies. Ex tx does not enter suspend
before rx or codec is suspended.
This patchset along with other SoundWire patches on the list
have been tested on SM8250 MTP device.
Thanks,
srini
Changes since v8:
- moved Kconfig and Makefile changes to last patch as suggested by Mark
- removed array of enums and used static entries instead. Suggested by Mark
- return true if put succeeds, Suggested by Mark
- removed some unneeded semi-colons in switch
Srinivas Kandagatla (9):
ASoC: dt-bindings: wcd938x: add bindings for wcd938x
ASoC: codecs: wcd-clsh: add new version support
ASoC: codecs: wcd938x: add basic driver
ASoC: dt-bindings: wcd938x-sdw: add bindings for wcd938x-sdw
ASoC: codecs: wcd938x-sdw: add SoundWire driver
ASoC: codecs: wcd938x: add basic controls
ASoC: codecs: wcd938x: add playback dapm widgets
ASoC: codecs: wcd938x: add capture dapm widgets
ASoC: codecs: wcd938x: add audio routing and Kconfig
.../bindings/sound/qcom,wcd938x-sdw.yaml | 70 +
.../bindings/sound/qcom,wcd938x.yaml | 146 +
sound/soc/codecs/Kconfig | 14 +
sound/soc/codecs/Makefile | 4 +
sound/soc/codecs/wcd-clsh-v2.c | 348 +-
sound/soc/codecs/wcd-clsh-v2.h | 16 +
sound/soc/codecs/wcd938x-sdw.c | 315 ++
sound/soc/codecs/wcd938x.c | 3753 +++++++++++++++++
sound/soc/codecs/wcd938x.h | 720 ++++
9 files changed, 5376 insertions(+), 10 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
create mode 100644 sound/soc/codecs/wcd938x-sdw.c
create mode 100644 sound/soc/codecs/wcd938x.c
create mode 100644 sound/soc/codecs/wcd938x.h
--
2.21.0
next reply other threads:[~2021-06-09 9:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-09 9:09 Srinivas Kandagatla [this message]
2021-06-09 9:09 ` [PATCH v9 1/9] ASoC: dt-bindings: wcd938x: add bindings for wcd938x Srinivas Kandagatla
2021-06-09 9:09 ` [PATCH v9 2/9] ASoC: codecs: wcd-clsh: add new version support Srinivas Kandagatla
2021-06-09 9:09 ` [PATCH v9 3/9] ASoC: codecs: wcd938x: add basic driver Srinivas Kandagatla
2021-06-09 9:09 ` [PATCH v9 4/9] ASoC: dt-bindings: wcd938x-sdw: add bindings for wcd938x-sdw Srinivas Kandagatla
2021-06-09 9:09 ` [PATCH v9 5/9] ASoC: codecs: wcd938x-sdw: add SoundWire driver Srinivas Kandagatla
2021-06-09 9:09 ` [PATCH v9 6/9] ASoC: codecs: wcd938x: add basic controls Srinivas Kandagatla
2021-06-09 9:09 ` [PATCH v9 7/9] ASoC: codecs: wcd938x: add playback dapm widgets Srinivas Kandagatla
2021-06-09 9:09 ` [PATCH v9 8/9] ASoC: codecs: wcd938x: add capture " Srinivas Kandagatla
2021-06-09 9:09 ` [PATCH v9 9/9] ASoC: codecs: wcd938x: add audio routing and Kconfig Srinivas Kandagatla
2021-06-14 19:53 ` [PATCH v9 0/9] ASoC: codecs: add wcd938x support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210609090943.7896-1-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).