From: Jacky Bai <ping.bai@nxp.com>
To: robh+dt@kernel.org, shawnguo@kernel.org, sboyd@kernel.org,
s.hauer@pengutronix.de, linus.walleij@linaro.org,
aisheng.dong@nxp.com
Cc: festevam@gmail.com, kernel@pengutronix.de, linux-imx@nxp.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 11/11] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
Date: Fri, 25 Jun 2021 09:13:55 +0800 [thread overview]
Message-ID: <20210625011355.3468586-12-ping.bai@nxp.com> (raw)
In-Reply-To: <20210625011355.3468586-1-ping.bai@nxp.com>
Add the basic dts file for i.MX8ULP EVK board.
Only the necessary devices for minimal system boot up are enabled:
enet, emmc, usb, console uart.
some of the devices' pin status may lost during low power mode,
so additional sleep pinctrl properties are included by default.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
---
- v3 changes:
no
- v2 changes:
add the memory node place holder
update the license
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 148 ++++++++++++++++++
2 files changed, 149 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 25806c4924cb..8c24a05d55af 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -65,5 +65,6 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
new file mode 100644
index 000000000000..de84f29c12ce
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp.dtsi"
+
+/ {
+ model = "NXP i.MX8ULP EVK";
+ compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
+
+ chosen {
+ stdout-path = &lpuart5;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0 0x80000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy {
+ reg = <1>;
+ micrel,led-mode = <1>;
+ };
+ };
+};
+
+&lpuart5 {
+ /* console */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpuart5>;
+ pinctrl-1 = <&pinctrl_lpuart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_otgid1>;
+ pinctrl-1 = <&pinctrl_otgid1>;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_otgid2>;
+ pinctrl-1 = <&pinctrl_otgid2>;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbphy2 {
+ status = "okay";
+};
+
+&usbmisc2 {
+ status = "okay";
+};
+
+&usdhc0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc0>;
+ pinctrl-1 = <&pinctrl_usdhc0>;
+ non-removable;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&iomuxc1 {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX8ULP_PAD_PTE15__ENET0_MDC 0x43
+ MX8ULP_PAD_PTE14__ENET0_MDIO 0x43
+ MX8ULP_PAD_PTE17__ENET0_RXER 0x43
+ MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43
+ MX8ULP_PAD_PTF1__ENET0_RXD0 0x43
+ MX8ULP_PAD_PTE20__ENET0_RXD1 0x43
+ MX8ULP_PAD_PTE16__ENET0_TXEN 0x43
+ MX8ULP_PAD_PTE23__ENET0_TXD0 0x43
+ MX8ULP_PAD_PTE22__ENET0_TXD1 0x43
+ MX8ULP_PAD_PTE19__ENET0_REFCLK 0x43
+ MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
+ >;
+ };
+
+ pinctrl_lpuart5: lpuart5grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF14__LPUART5_TX 0x3
+ MX8ULP_PAD_PTF15__LPUART5_RX 0x3
+ >;
+ };
+
+ pinctrl_otgid1: usb1grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF2__USB0_ID 0x10003
+ >;
+ };
+
+ pinctrl_otgid2: usb2grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTD23__USB1_ID 0x10003
+ >;
+ };
+
+ pinctrl_usdhc0: usdhc0grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTD1__SDHC0_CMD 0x43
+ MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042
+ MX8ULP_PAD_PTD10__SDHC0_D0 0x43
+ MX8ULP_PAD_PTD9__SDHC0_D1 0x43
+ MX8ULP_PAD_PTD8__SDHC0_D2 0x43
+ MX8ULP_PAD_PTD7__SDHC0_D3 0x43
+ MX8ULP_PAD_PTD6__SDHC0_D4 0x43
+ MX8ULP_PAD_PTD5__SDHC0_D5 0x43
+ MX8ULP_PAD_PTD4__SDHC0_D6 0x43
+ MX8ULP_PAD_PTD3__SDHC0_D7 0x43
+ MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042
+ >;
+ };
+};
--
2.26.2
next prev parent reply other threads:[~2021-06-25 1:04 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-25 1:13 [PATCH v3 00/11] Add imx8ulp basic dtsi support Jacky Bai
2021-06-25 1:13 ` [PATCH v3 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string Jacky Bai
2021-07-23 16:06 ` Linus Walleij
2021-06-25 1:13 ` [PATCH v3 02/11] dt-bindings: i2c: imx-lpi2c: " Jacky Bai
2021-06-25 1:13 ` [PATCH v3 03/11] dt-bindings: mmc: imx-esdhc: " Jacky Bai
2021-06-25 1:13 ` [PATCH v3 04/11] dt-bindings: serial: fsl-lpuart: " Jacky Bai
2021-06-25 1:13 ` [PATCH v3 05/11] dt-bindings: spi: fsl-lpspi: " Jacky Bai
2021-06-25 1:13 ` [PATCH v3 06/11] dt-bindings: timer: tpm-timer: " Jacky Bai
2021-06-25 1:13 ` [PATCH v3 07/11] dt-bindings: watchdog: imx7ulp-wdt: " Jacky Bai
2021-06-25 1:13 ` [PATCH v3 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk Jacky Bai
2021-06-25 1:13 ` [PATCH v3 09/11] dt-bindings: clock: Add imx8ulp clock support Jacky Bai
2021-07-14 8:21 ` Shawn Guo
2021-07-14 8:31 ` Jacky Bai
2021-07-14 8:40 ` Shawn Guo
2021-07-14 8:48 ` Jacky Bai
2021-07-14 19:41 ` Rob Herring
2021-06-25 1:13 ` [PATCH v3 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp Jacky Bai
2021-07-07 9:52 ` Aisheng Dong
2021-07-14 19:46 ` Rob Herring
2021-06-25 1:13 ` Jacky Bai [this message]
2021-07-07 9:53 ` [PATCH v3 11/11] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board Aisheng Dong
2021-07-14 8:24 ` Shawn Guo
2021-07-14 8:32 ` Jacky Bai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210625011355.3468586-12-ping.bai@nxp.com \
--to=ping.bai@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).