From: Qing Zhang <zhangqing@loongson.cn>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Rob Herring <robh+dt@kernel.org>,
Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 1/3] MIPS: Loongson64: Add Loongson-2K1000 reset platform driver
Date: Thu, 1 Jul 2021 11:01:35 +0800 [thread overview]
Message-ID: <20210701030137.10566-1-zhangqing@loongson.cn> (raw)
Add power management register operations to support reboot and poweroff.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
---
v6-v7:
No Change
---
drivers/platform/mips/Kconfig | 6 ++++
drivers/platform/mips/Makefile | 1 +
drivers/platform/mips/ls2k-reset.c | 53 ++++++++++++++++++++++++++++++
3 files changed, 60 insertions(+)
create mode 100644 drivers/platform/mips/ls2k-reset.c
diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index 8ac149173c64..d421e1482395 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -30,4 +30,10 @@ config RS780E_ACPI
help
Loongson RS780E PCH ACPI Controller driver.
+config LS2K_RESET
+ bool "Loongson-2K1000 Reset Controller"
+ depends on MACH_LOONGSON64 || COMPILE_TEST
+ help
+ Loongson-2K1000 Reset Controller driver.
+
endif # MIPS_PLATFORM_DEVICES
diff --git a/drivers/platform/mips/Makefile b/drivers/platform/mips/Makefile
index 178149098777..4c71444e453a 100644
--- a/drivers/platform/mips/Makefile
+++ b/drivers/platform/mips/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_CPU_HWMON) += cpu_hwmon.o
obj-$(CONFIG_RS780E_ACPI) += rs780e-acpi.o
+obj-$(CONFIG_LS2K_RESET) += ls2k-reset.o
diff --git a/drivers/platform/mips/ls2k-reset.c b/drivers/platform/mips/ls2k-reset.c
new file mode 100644
index 000000000000..286d47bf6964
--- /dev/null
+++ b/drivers/platform/mips/ls2k-reset.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021, Qing Zhang <zhangqing@loongson.cn>
+ * Loongson-2K1000 reset support
+ */
+
+#include <linux/of_address.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+
+#define PM1_STS 0x0c /* Power Management1 Status Register */
+#define PM1_CNT 0x14 /* Power Management 1 Control Register */
+#define RST_CNT 0x30 /* Reset Control Register */
+
+static void __iomem *base;
+
+static void ls2k_restart(char *command)
+{
+ writel(0x1, (void *)base + RST_CNT);
+}
+
+static void ls2k_poweroff(void)
+{
+ /* Clear */
+ writel((readl((void *)base + PM1_STS) & 0xffffffff), (void *)base + PM1_STS);
+ /* Sleep Enable | Soft Off*/
+ writel(GENMASK(12, 10)|BIT(13), (void *)base + PM1_CNT);
+}
+
+static int ls2k_reset_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "loongson,ls2k-pm");
+ if (!np) {
+ pr_info("Failed to get PM node\n");
+ return -ENODEV;
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_info("Failed to map PM register base address\n");
+ return -ENOMEM;
+ }
+
+ _machine_restart = ls2k_restart;
+ pm_power_off = ls2k_poweroff;
+
+ of_node_put(np);
+ return 0;
+}
+
+arch_initcall(ls2k_reset_init);
--
2.31.0
next reply other threads:[~2021-07-01 3:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-01 3:01 Qing Zhang [this message]
2021-07-01 3:01 ` [PATCH v7 2/3] MIPS: Loongson64: DTS: Add pm block node for Loongson-2K1000 Qing Zhang
2021-07-01 3:01 ` [PATCH v7 3/3] dt-bindings: mips: Add Loongson-2K1000 reset support Qing Zhang
2021-07-01 14:02 ` Rob Herring
2021-07-01 9:04 ` [PATCH v7 1/3] MIPS: Loongson64: Add Loongson-2K1000 reset platform driver Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210701030137.10566-1-zhangqing@loongson.cn \
--to=zhangqing@loongson.cn \
--cc=devicetree@vger.kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).