devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: WANG Xuerui <git@xen0n.name>
To: linux-rtc@vger.kernel.org
Cc: WANG Xuerui <git@xen0n.name>, Huacai Chen <chenhuacai@kernel.org>,
	Jiaxun Yang <jiaxun.yang@flygoat.com>,
	devicetree@vger.kernel.org, linux-mips@vger.kernel.org
Subject: [PATCH v5 1/6] rtc: ls2x: Add support for the Loongson-2K/LS7A RTC
Date: Fri,  2 Jul 2021 14:54:46 +0800	[thread overview]
Message-ID: <20210702065451.1175356-2-git@xen0n.name> (raw)
In-Reply-To: <20210702065451.1175356-1-git@xen0n.name>

This RTC module is integrated into the Loongson-2K SoC and the LS7A
bridge chip. This version is almost entirely rewritten to make use of
current kernel API.

Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # loongson2k
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
---
 drivers/rtc/Kconfig    |  11 +++
 drivers/rtc/Makefile   |   1 +
 drivers/rtc/rtc-ls2x.c | 180 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 192 insertions(+)
 create mode 100644 drivers/rtc/rtc-ls2x.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 12153d5801ce..8918b1d45976 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1304,6 +1304,17 @@ config RTC_DRV_NTXEC
 	  embedded controller found in certain e-book readers designed by the
 	  original design manufacturer Netronix.
 
+config RTC_DRV_LS2X
+	tristate "Loongson LS2X RTC"
+	depends on OF && MACH_LOONGSON64 || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  If you say yes here you get support for the RTC on the Loongson-2K
+	  SoC and LS7A bridge, which first appeared on the Loongson-2H.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ls2x.
+
 comment "on-CPU RTC drivers"
 
 config RTC_DRV_ASM9260
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2dd0dd956b0e..6042ff1e73b7 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -81,6 +81,7 @@ obj-$(CONFIG_RTC_DRV_LOONGSON1)	+= rtc-ls1x.o
 obj-$(CONFIG_RTC_DRV_LP8788)	+= rtc-lp8788.o
 obj-$(CONFIG_RTC_DRV_LPC24XX)	+= rtc-lpc24xx.o
 obj-$(CONFIG_RTC_DRV_LPC32XX)	+= rtc-lpc32xx.o
+obj-$(CONFIG_RTC_DRV_LS2X)	+= rtc-ls2x.o
 obj-$(CONFIG_RTC_DRV_M41T80)	+= rtc-m41t80.o
 obj-$(CONFIG_RTC_DRV_M41T93)	+= rtc-m41t93.o
 obj-$(CONFIG_RTC_DRV_M41T94)	+= rtc-m41t94.o
diff --git a/drivers/rtc/rtc-ls2x.c b/drivers/rtc/rtc-ls2x.c
new file mode 100644
index 000000000000..58901323b219
--- /dev/null
+++ b/drivers/rtc/rtc-ls2x.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Loongson-2K/7A RTC driver
+ *
+ * Based on the original out-of-tree Loongson-2H RTC driver for Linux 2.6.32,
+ * by Shaozong Liu <liushaozong@loongson.cn>.
+ *
+ * Maintained out-of-tree by Huacai Chen <chenhuacai@kernel.org>.
+ *
+ * Rewritten for mainline by WANG Xuerui <git@xen0n.name>.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define TOY_TRIM_REG   0x20
+#define TOY_WRITE0_REG 0x24
+#define TOY_WRITE1_REG 0x28
+#define TOY_READ0_REG  0x2c
+#define TOY_READ1_REG  0x30
+#define TOY_MATCH0_REG 0x34
+#define TOY_MATCH1_REG 0x38
+#define TOY_MATCH2_REG 0x3c
+#define RTC_CTRL_REG   0x40
+#define RTC_TRIM_REG   0x60
+#define RTC_WRITE0_REG 0x64
+#define RTC_READ0_REG  0x68
+#define RTC_MATCH0_REG 0x6c
+#define RTC_MATCH1_REG 0x70
+#define RTC_MATCH2_REG 0x74
+
+#define TOY_MON        GENMASK(31, 26)
+#define TOY_DAY        GENMASK(25, 21)
+#define TOY_HOUR       GENMASK(20, 16)
+#define TOY_MIN        GENMASK(15, 10)
+#define TOY_SEC        GENMASK(9, 4)
+#define TOY_MSEC       GENMASK(3, 0)
+
+struct ls2x_rtc_priv {
+	struct regmap *regmap;
+};
+
+static const struct regmap_config ls2x_rtc_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+struct ls2x_rtc_regs {
+	u32 reg0;
+	u32 reg1;
+};
+
+static inline void ls2x_rtc_regs_to_time(struct ls2x_rtc_regs *regs,
+					 struct rtc_time *tm)
+{
+	tm->tm_year = regs->reg1;
+	tm->tm_sec = FIELD_GET(TOY_SEC, regs->reg0);
+	tm->tm_min = FIELD_GET(TOY_MIN, regs->reg0);
+	tm->tm_hour = FIELD_GET(TOY_HOUR, regs->reg0);
+	tm->tm_mday = FIELD_GET(TOY_DAY, regs->reg0);
+	tm->tm_mon = FIELD_GET(TOY_MON, regs->reg0) - 1;
+}
+
+static inline void ls2x_rtc_time_to_regs(struct rtc_time *tm,
+					 struct ls2x_rtc_regs *regs)
+{
+	regs->reg0 = FIELD_PREP(TOY_SEC, tm->tm_sec);
+	regs->reg0 |= FIELD_PREP(TOY_MIN, tm->tm_min);
+	regs->reg0 |= FIELD_PREP(TOY_HOUR, tm->tm_hour);
+	regs->reg0 |= FIELD_PREP(TOY_DAY, tm->tm_mday);
+	regs->reg0 |= FIELD_PREP(TOY_MON, tm->tm_mon + 1);
+	regs->reg1 = tm->tm_year;
+}
+
+static int ls2x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ls2x_rtc_priv *priv = dev_get_drvdata(dev);
+	struct ls2x_rtc_regs regs;
+	int ret;
+
+	ret = regmap_read(priv->regmap, TOY_READ1_REG, &regs.reg1);
+	if (unlikely(ret))
+		return ret;
+
+	ret = regmap_read(priv->regmap, TOY_READ0_REG, &regs.reg0);
+	if (unlikely(ret))
+		return ret;
+
+	ls2x_rtc_regs_to_time(&regs, tm);
+
+	return 0;
+}
+
+static int ls2x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ls2x_rtc_priv *priv = dev_get_drvdata(dev);
+	struct ls2x_rtc_regs regs;
+	int ret;
+
+	ls2x_rtc_time_to_regs(tm, &regs);
+
+	ret = regmap_write(priv->regmap, TOY_WRITE0_REG, regs.reg0);
+	if (unlikely(ret))
+		return ret;
+
+	return regmap_write(priv->regmap, TOY_WRITE1_REG, regs.reg1);
+}
+
+static struct rtc_class_ops ls2x_rtc_ops = {
+	.read_time = ls2x_rtc_read_time,
+	.set_time = ls2x_rtc_set_time,
+};
+
+static int ls2x_rtc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rtc_device *rtc;
+	struct ls2x_rtc_priv *priv;
+	void __iomem *regs;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (unlikely(!priv))
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	priv->regmap = devm_regmap_init_mmio(dev, regs,
+					     &ls2x_rtc_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	rtc = devm_rtc_allocate_device(dev);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	rtc->ops = &ls2x_rtc_ops;
+
+	/* Due to hardware erratum, all years multiple of 4 are considered
+	 * leap year, so only years 2000 through 2099 are usable.
+	 *
+	 * Previous out-of-tree versions of this driver wrote tm_year directly
+	 * into the year register, so epoch 2000 must be used to preserve
+	 * semantics on shipped systems.
+	 */
+	rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+	return devm_rtc_register_device(rtc);
+}
+
+static const struct of_device_id ls2x_rtc_of_match[] = {
+	{ .compatible = "loongson,ls2x-rtc" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ls2x_rtc_of_match);
+
+static struct platform_driver ls2x_rtc_driver = {
+	.probe		= ls2x_rtc_probe,
+	.driver		= {
+		.name	= "ls2x-rtc",
+		.of_match_table = ls2x_rtc_of_match,
+	},
+};
+
+module_platform_driver(ls2x_rtc_driver);
+
+MODULE_DESCRIPTION("LS2X RTC driver");
+MODULE_AUTHOR("WANG Xuerui");
+MODULE_AUTHOR("Huacai Chen");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ls2x-rtc");
-- 
2.30.1


  reply	other threads:[~2021-07-02  6:55 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-02  6:54 [PATCH v5 0/6] rtc: ls2x: Add support for the Loongson-2K/LS7A RTC WANG Xuerui
2021-07-02  6:54 ` WANG Xuerui [this message]
2021-07-02  6:54 ` [PATCH v5 2/6] dt-bindings: rtc: Add bindings for LS2X RTC WANG Xuerui
2021-07-02  6:54 ` [PATCH v5 3/6] MIPS: Loongson64: DTS: Add RTC support to LS7A WANG Xuerui
2021-07-02  6:54 ` [PATCH v5 5/6] MIPS: Loongson64: DTS: Add RTC support to Loongson-2K WANG Xuerui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210702065451.1175356-2-git@xen0n.name \
    --to=git@xen0n.name \
    --cc=chenhuacai@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jiaxun.yang@flygoat.com \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).